Vacuum Line question

cassbongard · August 15th, 2011, 11:06 AM

Ok did the search thing pulled up a little info but still no answer. AC output is stuck on defrosters. OK vacuum line issue. Tracked vacuum line down and found a broken line that runs parallel to firewall. Its on the drivers side and i read that this line is one that could cause the problem. My question now is where does this line run I cannot find where it goes on any vacuum line diagram it just shows it dead ending.

Skargon · August 15th, 2011, 11:22 AM

Had this same problem, Fixed it with this..

In that circle, is where my vacuum like ended, Their is a slot on that piece that says.. "A/C" and I plugged it there, and it works now. Hopefully it will for you too.

cassbongard · August 15th, 2011, 04:16 PM

thanks i will check that out this evening and to jsut double check it is the small vacuum line your talking about not the big rubber one? along the firewall you can see a small one under the big line and that is the one I found broken

Skargon · August 15th, 2011, 07:39 PM

The small one is the one that was broken on mine, its actually not even plugged in on that picture, I had'nt noticed it when I took that picture.

August 15th, 2011, 11:06 AM	#1
cassbongard Newbie 1998 Mustang v-6 Join Date: Nov 2010 Location: Clarksville TN Posts: 36 iTrader: 0 reviews	Vacuum Line question Ok did the search thing pulled up a little info but still no answer. AC output is stuck on defrosters. OK vacuum line issue. Tracked vacuum line down and found a broken line that runs parallel to firewall. Its on the drivers side and i read that this line is one that could cause the problem. My question now is where does this line run I cannot find where it goes on any vacuum line diagram it just shows it dead ending.

August 15th, 2011, 11:22 AM	#2
Skargon Skar Gone 1998 Mustang V6 17.27@76.66 Join Date: Jul 2011 Location: Dayton Ohio Posts: 1,646 iTrader: 0 reviews	Had this same problem, Fixed it with this.. In that circle, is where my vacuum like ended, Their is a slot on that piece that says.. "A/C" and I plugged it there, and it works now. Hopefully it will for you too. __________________ 1998 5 Speed, CAI, Exhaust, Rear Seat Delete.

August 15th, 2011, 07:39 PM	#4
Skargon Skar Gone 1998 Mustang V6 17.27@76.66 Join Date: Jul 2011 Location: Dayton Ohio Posts: 1,646 iTrader: 0 reviews	The small one is the one that was broken on mine, its actually not even plugged in on that picture, I had'nt noticed it when I took that picture. __________________ 1998 5 Speed, CAI, Exhaust, Rear Seat Delete.

Threads Similar to: Vacuum Line question
Thread	Thread Starter	Forum	Replies	Last Post
vacuum line	mustangmad	5.0 Mustangs	1	August 19th, 2009 02:37 AM
vacuum line	uk stinger-stang	2005 - 2010	2	May 28th, 2009 04:40 PM
vacuum line?	1989Gt.	5.0 Mustangs	6	May 12th, 2009 06:22 PM
vacuum line	ViperblueGT	5.0 Mustangs	24	May 5th, 2009 08:04 AM
EGR vacuum line?	92sspnotchback	5.0 Mustangs	1	June 12th, 2008 12:18 AM

August 15th, 2011, 04:16 PM	#3
cassbongard Newbie 1998 Mustang v-6 Join Date: Nov 2010 Location: Clarksville TN Posts: 36 iTrader: 0 reviews	thanks i will check that out this evening and to jsut double check it is the small vacuum line your talking about not the big rubber one? along the firewall you can see a small one under the big line and that is the one I found broken

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 08:52 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.