New Mustang

6ixer · December 19th, 2011, 11:39 AM

For the exhuast and bumper combo...id think be easier to put it on, the gt bumper that is; and ride around with out tthe duals coming out the bumper then have the exhuast put on...or just save and do it alla t once

2nd no you don't need a speedo recalibrate for tired... if you have 17-18 inch wheels your fine ..at most you will set your speedomete off by mabey 2 tenths of a mph...not any big deal

Terrapinz · December 19th, 2011, 10:06 PM

Ok well right now i'm on 225/55/16 so going up to 18 inch wheels with 245/45/18 wouldn't be that big a difference to the speedometer? I'm not sure on tire size for the 18, that was just one that isn't too far off from my original diameter.

6ER THEN I 8ER! · December 19th, 2011, 11:07 PM

Originally Posted by Terrapinz

Ok well right now i'm on 225/55/16 so going up to 18 inch wheels with 245/45/18 wouldn't be that big a difference to the speedometer? I'm not sure on tire size for the 18, that was just one that isn't too far off from my original diameter.

you're staying in the same wheel & tire diameter so you won't have any issue....when it comes to your speedo that's all you need to worry about

Terrapinz · December 20th, 2011, 12:12 AM

ok thanks a lot

SON1C · December 20th, 2011, 07:26 PM

i could really hook you up with a good exhaust set up and gt bumper, im in NoVA

SON1C · December 20th, 2011, 07:32 PM

2000 V6 Mustang Exhaust Thrush - YouTube

this is an example of a good setup -> uses thrush chambered divorced duals

6ER THEN I 8ER! · December 20th, 2011, 10:11 PM

Originally Posted by SteeD43

i could really hook you up with a good exhaust set up and gt bumper, im in NoVA

always good to see members helping local members out....

Terrapinz · December 20th, 2011, 10:12 PM

So do you have the parts to sell? Or do you work at a shop. But yea I'm not too far at all from VA.

SON1C · December 20th, 2011, 10:26 PM

PM me

xi KRON1C ix · December 21st, 2011, 10:06 AM

nice looking car man, good luck with future mods

mcqueen · December 21st, 2011, 07:33 PM

Fantastic color choice. I've been around here so long I feel like an artist looking at a blank canvas

Terrapinz · December 22nd, 2011, 01:36 AM

Thanks again guys.

Originally Posted by mcqueen

Fantastic color choice. I've been around here so long I feel like an artist looking at a blank canvas

If only I had some money right now to buy some paint haha

6ER THEN I 8ER! · December 22nd, 2011, 01:56 AM

Originally Posted by mcqueen

Fantastic color choice. I've been around here so long I feel like an artist looking at a blank canvas

how do you think i feel

and i'm actually an artist

December 19th, 2011, 11:39 AM	#21
6ixer Hardcore Enthusiast 2000 mustang v6 14.6@99.68 Join Date: Apr 2010 Location: east greenbush, ny Posts: 1,567 Blog Entries: 3 iTrader: 0 reviews	For the exhuast and bumper combo...id think be easier to put it on, the gt bumper that is; and ride around with out tthe duals coming out the bumper then have the exhuast put on...or just save and do it alla t once 2nd no you don't need a speedo recalibrate for tired... if you have 17-18 inch wheels your fine ..at most you will set your speedomete off by mabey 2 tenths of a mph...not any big deal __________________ Ported heads, comp cams cam, AM CAI, posi'd rear with 3.73 gears, flowmaster exhaust Fixed clutch!!!!! "My mustang likes a good ol' fashion bowl of rice....especially fried"

December 20th, 2011, 07:26 PM	#25
SON1C Run ur car, not ur mouth. 2003 Sonic Blue 4.6L Join Date: Jul 2010 Location: Northern Virginia Posts: 4,057 Blog Entries: 1 iTrader: 3 reviews	i could really hook you up with a good exhaust set up and gt bumper, im in NoVA __________________ 238rwhp/263rwtq Drew's Build Thread Last edited by SON1C; December 20th, 2011 at 07:40 PM.

December 20th, 2011, 10:26 PM	#29
SON1C Run ur car, not ur mouth. 2003 Sonic Blue 4.6L Join Date: Jul 2010 Location: Northern Virginia Posts: 4,057 Blog Entries: 1 iTrader: 3 reviews	PM me __________________ 238rwhp/263rwtq Drew's Build Thread

December 21st, 2011, 10:06 AM	#30
xi KRON1C ix Enthusiast 2002 v6 too slow Join Date: Jun 2011 Location: Nashville, TN Posts: 883 iTrader: 0 reviews	nice looking car man, good luck with future mods __________________

Threads Similar to: New Mustang
Thread	Thread Starter	Forum	Replies	Last Post
Fastlane Motorsports Mustang Hits Wall at Mustang Week Video	gtjohnny	The Clubhouse	13	July 24th, 2011 09:25 PM
Gateway Classic Mustang to produce limited edition Steve McQueen Mustang	PsyAbe	The Clubhouse	4	March 21st, 2011 02:49 AM
iRacing.com Launches Virtual Mustang Cup with Ford Racing Mustang Challenge FR500S	AutoGuide.com	The Clubhouse	11	July 8th, 2010 01:00 PM
Live Broadcast at 5:30 PM Central: Mustang Stories Contest Winner Gets His Mustang	unlicensed to drive	The Clubhouse	30	July 7th, 2009 09:03 PM
MOFO Production-Turbo 5.4 Stang-600HP Mustang GT-408w mustang-Ported Blower Cobra!!	mofobucs	Multimedia	24	August 20th, 2008 01:19 PM

December 19th, 2011, 10:06 PM	#22
Terrapinz Newbie 2003 Mustang v6 Join Date: Dec 2011 Location: Maryland Posts: 32 iTrader: 0 reviews	Ok well right now i'm on 225/55/16 so going up to 18 inch wheels with 245/45/18 wouldn't be that big a difference to the speedometer? I'm not sure on tire size for the 18, that was just one that isn't too far off from my original diameter.

December 20th, 2011, 12:12 AM	#24
Terrapinz Newbie 2003 Mustang v6 Join Date: Dec 2011 Location: Maryland Posts: 32 iTrader: 0 reviews	ok thanks a lot

December 20th, 2011, 10:12 PM	#28
Terrapinz Newbie 2003 Mustang v6 Join Date: Dec 2011 Location: Maryland Posts: 32 iTrader: 0 reviews	So do you have the parts to sell? Or do you work at a shop. But yea I'm not too far at all from VA.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 08:03 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.