Bomz CAI Added Nuthing But A Dog Now

bigpopaz99 · June 18th, 2006, 11:50 PM

HEY FELLAS I DID A RECENT BOMZ CAI AND NOTICED A MAJOR LOSS IN POWER THE ONLY THING I DIDNT ADD WAS THE SCREEN IN W/ THE MAF .
BEFORE THE CAR WAS STOCK W/ A K&N FLITER W/ THE AIR SNOOT REMOVED ALSO HAVE A DIABLO DELTA CHIP INSTALLED .THE CAR IS A MANUAL V6 ANY IDEAS ?? IS IT THE SCREEN READY TO PUT THE STOCKER BACK ON

99mustang232 · June 19th, 2006, 06:39 AM

is everything connected good, check for leaks?

AtlanticBlue99 · June 19th, 2006, 08:43 AM

Don't expect any gains/losses in performance with a CAI. Make sure you hooked everything up correctly.

bigpopaz99 · June 19th, 2006, 02:04 PM

ya every thing is good except the screen that goes over the maf

99mustang232 · June 19th, 2006, 02:15 PM

did you get a CEL/SES light?

bigpopaz99 · June 19th, 2006, 03:05 PM

nope no engine light or service light i think my delta chip would permit the light from comming on im gonna go throw the screen on it might have to mill it sum if that doesnt work im gonna throw the stocker w/ the k&n back on it

99mustang232 · June 19th, 2006, 03:28 PM

re-check to make sure your re-attached the air temp sensor, should be a small hole on the underside. also you can try resetting your pcm by disconnecting your neg. terminal on your battery for several minutes then re-attach, however you will have to reprogram the presets in your radio.

bigpopaz99 · June 19th, 2006, 07:05 PM

air temp is all good installed the screen it helped a tiny bit im gonna reset the ecu but i dont think its gonna matter because the tune on my chip

bigpopaz99 · June 20th, 2006, 01:45 AM

this is weird put the stocker back on it helped sum may be the ait temp sensor got messed up wouldnt that give u a light humm weird ill unplug it tommrow and try it if theirs no difrence its gotta be bad

bigpopaz99 · June 20th, 2006, 08:57 PM

shes back to norm now thanks guys

drgnracin72 · June 20th, 2006, 09:14 PM

what did you do to make it run right?

AtlanticBlue99 · June 21st, 2006, 05:54 PM

I left the MAF screen out of my intake tract when installing mine. I have had no ill effects. What ended up curing your dilemma?

bigpopaz99 · June 21st, 2006, 11:11 PM

i put the stocker back on it and reset the ecu disconected the cable fer about 20 minutes i would like to run the cai but man what a power loss only thing i can think of is my K&N filter in the stocker is bigger and allows more air flow i get that grrrrrr sound out of the cai like its fighting for air does any one else have a bomz cai ???? have any problems

bigpopaz99 · June 21st, 2006, 11:16 PM

gotta a trac loc so thats tommrows project hope that goes much better heres sum thing weird i went on a trip about 600 miles noticed stinky ass 80/90 was comming out of my pinion seal .got under the car and gave the pinion a good yank no slop "good news" went to unscrew the drain plug and it was pressurized so it looks like my vent cap is pluged er sum shit

AtlanticBlue99 · June 23rd, 2006, 06:44 PM

Originally Posted by bigpopaz99

i put the stocker back on it and reset the ecu disconected the cable fer about 20 minutes i would like to run the cai but man what a power loss only thing i can think of is my K&N filter in the stocker is bigger and allows more air flow i get that grrrrrr sound out of the cai like its fighting for air does any one else have a bomz cai ???? have any problems

I have a Bomz CAI, and have had no adverse effects. The price was awesome, and the fittament was on cue.

June 18th, 2006, 11:50 PM	#1
bigpopaz99 Newbie Join Date: May 2006 Posts: 36	Bomz CAI Added Nuthing But A Dog Now HEY FELLAS I DID A RECENT BOMZ CAI AND NOTICED A MAJOR LOSS IN POWER THE ONLY THING I DIDNT ADD WAS THE SCREEN IN W/ THE MAF . BEFORE THE CAR WAS STOCK W/ A K&N FLITER W/ THE AIR SNOOT REMOVED ALSO HAVE A DIABLO DELTA CHIP INSTALLED .THE CAR IS A MANUAL V6 ANY IDEAS ?? IS IT THE SCREEN READY TO PUT THE STOCKER BACK ON

June 19th, 2006, 06:39 AM	#2
99mustang232 MM Fanatic 1999 Ford Mustang V6 Join Date: Sep 2005 Location: newport news, va Posts: 3,717	is everything connected good, check for leaks? __________________ ...even fire and single cammin

June 19th, 2006, 08:43 AM	#3
AtlanticBlue99 Modded Autos Site Mod 1999 Ford Mustang V6 14.79 @ 92.15 Join Date: Aug 2005 Location: Evans, GA/Athens, GA Posts: 7,235	Don't expect any gains/losses in performance with a CAI. Make sure you hooked everything up correctly. __________________ ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.

June 19th, 2006, 02:15 PM	#5
99mustang232 MM Fanatic 1999 Ford Mustang V6 Join Date: Sep 2005 Location: newport news, va Posts: 3,717	did you get a CEL/SES light? __________________ ...even fire and single cammin

June 19th, 2006, 03:28 PM	#7
99mustang232 MM Fanatic 1999 Ford Mustang V6 Join Date: Sep 2005 Location: newport news, va Posts: 3,717	re-check to make sure your re-attached the air temp sensor, should be a small hole on the underside. also you can try resetting your pcm by disconnecting your neg. terminal on your battery for several minutes then re-attach, however you will have to reprogram the presets in your radio. __________________ ...even fire and single cammin

June 19th, 2006, 02:04 PM	#4
bigpopaz99 Newbie Join Date: May 2006 Posts: 36	ya every thing is good except the screen that goes over the maf

June 19th, 2006, 03:05 PM	#6
bigpopaz99 Newbie Join Date: May 2006 Posts: 36	nope no engine light or service light i think my delta chip would permit the light from comming on im gonna go throw the screen on it might have to mill it sum if that doesnt work im gonna throw the stocker w/ the k&n back on it

June 19th, 2006, 07:05 PM	#8
bigpopaz99 Newbie Join Date: May 2006 Posts: 36	air temp is all good installed the screen it helped a tiny bit im gonna reset the ecu but i dont think its gonna matter because the tune on my chip

June 20th, 2006, 01:45 AM	#9
bigpopaz99 Newbie Join Date: May 2006 Posts: 36	this is weird put the stocker back on it helped sum may be the ait temp sensor got messed up wouldnt that give u a light humm weird ill unplug it tommrow and try it if theirs no difrence its gotta be bad

June 20th, 2006, 08:57 PM	#10
bigpopaz99 Newbie Join Date: May 2006 Posts: 36	shes back to norm now thanks guys

June 21st, 2006, 05:54 PM	#12
AtlanticBlue99 Modded Autos Site Mod 1999 Ford Mustang V6 14.79 @ 92.15 Join Date: Aug 2005 Location: Evans, GA/Athens, GA Posts: 7,235	I left the MAF screen out of my intake tract when installing mine. I have had no ill effects. What ended up curing your dilemma? __________________ ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.

June 21st, 2006, 11:11 PM	#13
bigpopaz99 Newbie Join Date: May 2006 Posts: 36	i put the stocker back on it and reset the ecu disconected the cable fer about 20 minutes i would like to run the cai but man what a power loss only thing i can think of is my K&N filter in the stocker is bigger and allows more air flow i get that grrrrrr sound out of the cai like its fighting for air does any one else have a bomz cai ???? have any problems

June 21st, 2006, 11:16 PM	#14
bigpopaz99 Newbie Join Date: May 2006 Posts: 36	gotta a trac loc so thats tommrows project hope that goes much better heres sum thing weird i went on a trip about 600 miles noticed stinky ass 80/90 was comming out of my pinion seal .got under the car and gave the pinion a good yank no slop "good news" went to unscrew the drain plug and it was pressurized so it looks like my vent cap is pluged er sum shit

Threads Similar to: Bomz CAI Added Nuthing But A Dog Now
Thread	Thread Starter	Forum	Replies	Last Post
Shaker hood-Anybody added to GT?	STANGATUDE	99-04	7	November 2nd, 2007 01:21 PM
who wants $0020.00? (2 zeros added for zip)	HMUSN	The Clubhouse	217	September 6th, 2007 12:42 AM
Added a pony	turp	Classic Mustangs	2	March 30th, 2006 12:50 PM
Bomz Racing C.A.I. For Sale	2crunk	For Sale	3	September 5th, 2005 11:17 PM

All times are GMT -4. The time now is 12:49 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.