[dapack69]

375? Would you like to put money on that?

[02ponypackage]

if u only make 163 rwhp...i would own on u on a roll with 196rwhp and thats on a MD...a dyno jet would have been 210-215 according to Starkey and my calculations...i dynoed 163rwhp with just my cai, gt catback, and xpipe

[HMUSN]

^ that's almost exactly what I dynoed at.

mods:

tunable induction cai
magnaflow catback and a custom made x pipe.

I made 166/202 on a dyno jet

[02ponypackage]

i guess the DRs gears and T lock do a world of wonders off the line...shit...if i had that with my setup now then i guess i would be running 14.5s or better

[ESG-642T]

Originally Posted by 02ponypackage if u only make 163 rwhp...i would own on u on a roll with 196rwhp and thats on a MD...a dyno jet would have been 210-215 according to Starkey and my calculations...i dynoed 163rwhp with just my cai, gt catback, and xpipe

I'de still put my money on AB and his gearing

Btw 02: I'm still curious as to where you dyno printout is? I've watched your video but I've never seen the actual printout? Edit: you only make 191hp with wcf

[02ponypackage]

I have the video as u saw and the sheet...i needa scan it or take a pic with my dads camera...i guess u wanna be able to match both tho anyone can have a paper and the video is solid but w/e....let me find the print out again....and having 30rwhp over AB idk if gears are gona help on a roll that much esp. when the car has no power at about 90.....then again 410s will rip down low thats for sure...then he will be in 4th before i am....so idk but still


i ran

15.4
91mph

2.6 60' on average

1/8 9.98
77mph i think

i gota get my time slip out the car to see the mph...unless u can see my mph 1/8 on the video maximus took of me that i posted

[ESG-642T]

Originally Posted by 02ponypackage I have the video as u saw and the sheet...i needa scan it or take a pic with my dads camera...i guess u wanna be able to match both tho anyone can have a paper and the video is solid but w/e....let me find the print out again....and having 30rwhp over AB idk if gears are gona help on a roll that much esp. when the car has no power at about 90.....then again 410s will rip down low thats for sure...then he will be in 4th before i am....so idk but still i ran 15.4 91mph 2.6 60' on average 1/8 9.98 77mph i think i gota get my time slip out the car to see the mph...unless u can see my mph 1/8 on the video maximus took of me that i posted

2.6 60' what were you doing sleeping lol?

[02ponypackage]

theres only so much u can do with a shitty track and one wheel...and this isnt an excuse...ask Maximus how shitty the track is...esp if ur on one wheel for a car.....ive gone 15.4s at 90 and 91mph...ive gone 15.6 at 90mph.....with a 2.6 60' now AB ran a 14.8 at 93mph...which tells me my car is picking up speed but only into late 2nd and into 3rd since i never touch 4th and if i do still not doing anything......so with the same setup DRs, 410s and a posi...plus 30+ rwhp i should make at least a 14.5 pass.....his mph is only 93 at 14.8 and mine 15.4 at 91....2mph doesnt make up .6 in the 1/4 im sure....so my car bogging from trying to be conservative on the launching or spinning to much because im 1/2 throttle doesnt help either...and to think i cant shift into 2nd and punch it without a shit load of wheel spin and hop out back.....so i get a 15.4 bogging bad and the rpms have to start from the bottom again and work up...then ease into 2nd....and give everything i have into 3rd which sometimes it chirps sometimes it doesnt....ive ran my car with a full tank and ran 15.6 because i needed some kinda traction...that nite i ran 15.4 was about 1/2 tank....if i try to run a 1/4 tank its just to lite...and my spare tire, jack, skateboard, and w.e else is still in my trunk at all times lol

[Onemanzu]

D i said i was going to guess... im not a dyno im a kid... and that was for idiot noobs wanting to know what their cai did for them...

uhh $.50 on that !! give me an address and a dyno sheet if im wrong its yours

[dapack69]

Originally Posted by Onemanzu D i said i was going to guess... im not a dyno im a kid... and that was for idiot noobs wanting to know what their cai did for them... uhh $.50 on that !! give me an address and a dyno sheet if im wrong its yours

Just giving you a hard time.

[Onemanzu]

what does she dyno at??

[dapack69]

Originally Posted by Onemanzu what does she dyno at??

ZERO!

I have to get home from Iraq, then install my 8-rib pulleys and then I have to install my new fuel system, from tank to the fuel rail.

[97TunedMustang]

375hp 415tq ...

my drivetrain is spaceage, it gives me power gains

[02ponypackage]

on 10psi how much power should i be putting out of course with another Sniper tune....i say at least 300rwhp

[dapack69]

Originally Posted by 97TunedMustang 375hp 415tq ... my drivetrain is spaceage, it gives me power gains

What air temps are you seeing and how much timing do you have?

[97TunedMustang]

Originally Posted by dapack69 Originally Posted by 97TunedMustang 375hp 415tq ... my drivetrain is spaceage, it gives me power gains What air temps are you seeing and how much timing do you have?

i was just messin, i really have no idea what im at. my tuner put me at 375 but what does he know. he also drives a 600hp procharged vette so you think he could make a reasonable guess but i dont advertise the car as such, its just what he said. I should probably get up there to lasotas new place and have it dynoed, but before i do that i would like to do gears and truetrac installation. oh wait thats $400, balls! and ive been putting it off for months lol, damn hondas takin up all my time and good bit of money

[dapack69]

I paid $500 just for my tru trac.

What are the specs on your cam, I went to your cardomain page but it does not say.

[97TunedMustang]

Originally Posted by dapack69 I paid $500 just for my tru trac. What are the specs on your cam, I went to your cardomain page but it does not say.

stock it was gonna be another $1,500 to have them switch out all the valve train components and to make everything work and it just wasnt gonna happen for that price. all along through the build i thought they were using the aftermarket cam and my dad was severely mistaken.

i bought my true trac from tomzac brand new for $330 shipped and the gears i paid like $175 for i think. cant remember

[dapack69]

You got ripped!

How much was the engine, you should of had everything done at once. You could pick up another 50 rwhp with a good cam.

[97TunedMustang]

Originally Posted by dapack69 You got ripped! How much was the engine, you should of had everything done at once. You could pick up another 50 rwhp with a good cam.

ah well what can ya do. not to many engine builders round here and i dont doubt ya on the potential gains i coulda had but shit happens, nothin i can do now.