[Avaric3]

where can i find a rebuild kit online for my lil pony? this summer im going to be installing an h/c/i and a forged 4.2 stroker kit to my engine and would like to rebuild it while im at it so i have a fresh engine to boost off of

[BWAL]

try www.summitracing.com

[whitemustang02]

i would say talk to some machean shops near you because if you are going to be doing all that i would seggest geting ur engine bored to clean up the side wall
and see what they have to seggest as far as rebiled kits

[itschristorres8]

an engine rebuild kit??
what exactly do you need?
and where are you getting the stroker kit from?

gaskets, rotating assembly can all be purchased at rpm-mustangs, they have a gasket kit for every gasket you need. as well as a 4.2L forged rotating assembly

[Onemanzu]

... im not sure what it is that you are rebuilding either... you wanna rebuild your engine that your going to put a 4.2 set up in as well as H.C.I work? well ... lets make a list of what you will want

New head studs (ARP if you can budget it in)
Head Gasket
Rings
Bearings (if your tearing it all apart its good to replace0
Springs and Lifters wouldn't hurt
Push rods
Rod Pins ... if damaged or worn out in any way
Valves might need inspection

all this can also be found at delk, chips, ssms, morana

if you order from morana now you might receive it by summer

[Avaric3]

Originally Posted by itschristorres8 an engine rebuild kit?? what exactly do you need? and where are you getting the stroker kit from? gaskets, rotating assembly can all be purchased at rpm-mustangs, they have a gasket kit for every gasket you need. as well as a 4.2L forged rotating assembly

yep, im getting the stroker from rpm mustangs. they have rebuild kits? i just saw a couple gasket kits, ill go back and take a look

[Onemanzu]

... when you say rebuild what do you mean?? like gaskets and rings?

[El_Cangri]

Originally Posted by Avaric3 where can i find a rebuild kit online for my lil pony? this summer im going to be installing an h/c/i and a forged 4.2 stroker kit to my engine and would like to rebuild it while im at it so i have a fresh engine to boost off of

i dont understad... of what you say... i'm thinking "rebuilding? but arent you going to drop a new 4.2 in there?

ohh now i get it.. your buying a stroker kit so you want like new gaskets and some rings and the other parts that the 4.2 kit will not bring.. ?

(I would just buy a new 4.2 and economize some time)

[Onemanzu]

cangri i told you using those translators doesn't really work

[El_Cangri]

keep it tech omz...

i don't feel like writing English today..

[Avaric3]

when i say rebuild, i mean all new gaskets and bearings