M-112 Adapter Intake Manifold

supercharged421 · November 20th, 2007, 01:45 PM

So SSM finally came out with one. I know that the Eaton M-112 basicly sucks and you sould buy a Pro-charger or Vortech insetad but how much boost could you run with an M-112? Does anyone have any clue about power you can gety form one on a V6?

Onemanzu · November 20th, 2007, 02:11 PM

yea at 11psi you can get around 300 i think it was... tomzac has had this unit on his car for about a year or so and he was putting out 300 on a stock engine ...

also mangumpowers.com can rework your M112 to make it a more efficent unit that is capable of more CFM ... but you have to be polite when begging them

anyways fthe total for all this should be around 2 grand... and for that you get the M112, adapter, tuner, fuel system upgrades... ... a standalone procharger is more expensive then that...

Hourofpain · November 20th, 2007, 02:55 PM

orrrr
get a twin screw with an adapter plate!
duhh

Onemanzu · November 20th, 2007, 05:50 PM

they don't really make a screw adapter the root is the only thing that bolts up right now

supercharged421 · November 20th, 2007, 06:00 PM

yeah. that isnt to bad for the price

Onemanzu · November 20th, 2007, 06:06 PM

332/365@10.2psi - tomzac...
lemme see if i can find his videos... also send him a PM if you would like more info on the systems he loves his ... others on 3.8mustang.com love theres

99v6stang · November 20th, 2007, 06:28 PM

well i hope this are good because i already started saving for one

BWAL · November 20th, 2007, 06:52 PM

Originally Posted by 99v6stang

well i hope this are good because i already started saving for one

make your own for like 1/10th of the price

Onemanzu · November 20th, 2007, 06:58 PM

Originally Posted by BWAL09

make your own for like 1/10th of the price

there aren't to many people with the tools or the skills to make there own... you needs some good welding and some killer precision

BWAL · November 20th, 2007, 07:04 PM

if i knew the dimensions, i could make one for the unbeatable price of $500

scxc15 · November 20th, 2007, 07:16 PM

Is 11 PSI as high as you could go with one. Not worrying about the engine that is.

Onemanzu · November 20th, 2007, 07:24 PM

from what i see 14.6 is very safe 16 is possible as a daily and the m112 maxs at 21 psi
the down side is the M112 flows about 700 cfm or so if you had it worked you might be able to get 8-900 cfm out of it

scxc15 · November 20th, 2007, 08:49 PM

Where can you get a pulley for 14 psi?

Onemanzu · November 20th, 2007, 08:58 PM

dunno thats a cobra question ...

scxc15 · November 20th, 2007, 09:09 PM

I wonder what kind of 1/4 mile times you could run with that at 10 PSI?

ESG-642T · November 20th, 2007, 09:23 PM

Originally Posted by supercharged421

So SSM finally came out with one. I know that the Eaton M-112 basicly sucks and you sould buy a Pro-charger or Vortech insetad but how much boost could you run with an M-112? Does anyone have any clue about power you can gety form one on a V6?

Who told you the m112 sucks? Where do you dig up information

Originally Posted by Onemanzu

they don't really make a screw adapter the root is the only thing that bolts up right now

This is so wrong its not funny...

Originally Posted by BWAL09

if i knew the dimensions, i could make one for the unbeatable price of $500

Buy one from ssms, modify it , and make some money!

BWAL · November 20th, 2007, 09:26 PM

somebody said ssms was selling the plates for like $900 though

ESG-642T · November 20th, 2007, 09:34 PM

Originally Posted by BWAL09

somebody said ssms was selling the plates for like $900 though

Right

Buy one for 900$ from them, modify the design, sell them for 500$...

Takes you 2 sales to make your $ back and everything after that = profit!

BWAL · November 20th, 2007, 09:35 PM

Originally Posted by SSStang

Right

Buy one for 900$ from them, modify the design, sell them for 500$...

Takes you 2 sales to make your $ back and everything after that = profit!

hell yeah, good thinkin. how big is the market for these adapter plates anyways? does ssms have a patent on their design?

Stang6899 · November 20th, 2007, 09:44 PM

If you could undercut ssms and sell yours for $500 you'd have a lot of buyers...I'd be one of them.

November 20th, 2007, 01:45 PM	#1
supercharged421 Regular 2004 Mustang n/a Join Date: Nov 2007 Location: East TN Posts: 159 iTrader: 0 reviews	M-112 Adapter Intake Manifold So SSM finally came out with one. I know that the Eaton M-112 basicly sucks and you sould buy a Pro-charger or Vortech insetad but how much boost could you run with an M-112? Does anyone have any clue about power you can gety form one on a V6?

November 20th, 2007, 02:11 PM	#2
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	yea at 11psi you can get around 300 i think it was... tomzac has had this unit on his car for about a year or so and he was putting out 300 on a stock engine ... also mangumpowers.com can rework your M112 to make it a more efficent unit that is capable of more CFM ... but you have to be polite when begging them anyways fthe total for all this should be around 2 grand... and for that you get the M112, adapter, tuner, fuel system upgrades... ... a standalone procharger is more expensive then that... __________________ My Foz

November 20th, 2007, 02:55 PM	#3
Hourofpain Hardcore Enthusiast 2005 Torrid Red GTO m6 Join Date: Mar 2007 Location: Virginia Beach Posts: 1,524 iTrader: 0 reviews	orrrr get a twin screw with an adapter plate! duhh __________________ 1996 Cobra To be sold... 2005 M6 Twin Turbo GTO Torrid Red Fully Forged LS2 Block Built to handle 1000RWHP. Fully ported Dart Heads. Edelbrock Jr Intake. Custom cut upper intake plenum. APS twin Turbo System with APS twin Fuel pumps.

November 20th, 2007, 05:50 PM	#4
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	they don't really make a screw adapter the root is the only thing that bolts up right now __________________ My Foz

November 20th, 2007, 06:06 PM	#6
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	332/365@10.2psi - tomzac... lemme see if i can find his videos... also send him a PM if you would like more info on the systems he loves his ... others on 3.8mustang.com love theres __________________ My Foz

November 20th, 2007, 06:00 PM	#5
supercharged421 Regular 2004 Mustang n/a Join Date: Nov 2007 Location: East TN Posts: 159 iTrader: 0 reviews	yeah. that isnt to bad for the price

November 20th, 2007, 06:28 PM	#7
99v6stang Enthusiast Join Date: Dec 2006 Posts: 760 iTrader: 0 reviews	well i hope this are good because i already started saving for one

November 20th, 2007, 07:04 PM	#10
BWAL MSTRB8N & MDR8N 2021 Mustang V15 Quad Turbo with nawz Join Date: Nov 2006 Location: On The Shaft Posts: 19,667 Blog Entries: 2 iTrader: 4 reviews	if i knew the dimensions, i could make one for the unbeatable price of $500 __________________ MM 1 am boner crew Cars and mod list in garage i like veiny meat sliding between my buttcheeks

November 20th, 2007, 07:16 PM	#11
scxc15 Enthusiast 2003 Mach 1 12.7@107 Join Date: Dec 2006 Location: East Tennessee Posts: 819 iTrader: 1 reviews	Is 11 PSI as high as you could go with one. Not worrying about the engine that is.

November 20th, 2007, 07:24 PM	#12
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	from what i see 14.6 is very safe 16 is possible as a daily and the m112 maxs at 21 psi the down side is the M112 flows about 700 cfm or so if you had it worked you might be able to get 8-900 cfm out of it __________________ My Foz

November 20th, 2007, 08:49 PM	#13
scxc15 Enthusiast 2003 Mach 1 12.7@107 Join Date: Dec 2006 Location: East Tennessee Posts: 819 iTrader: 1 reviews	Where can you get a pulley for 14 psi?

November 20th, 2007, 08:58 PM	#14
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	dunno thats a cobra question ... __________________ My Foz

November 20th, 2007, 09:09 PM	#15
scxc15 Enthusiast 2003 Mach 1 12.7@107 Join Date: Dec 2006 Location: East Tennessee Posts: 819 iTrader: 1 reviews	I wonder what kind of 1/4 mile times you could run with that at 10 PSI?

November 20th, 2007, 09:26 PM	#17
BWAL MSTRB8N & MDR8N 2021 Mustang V15 Quad Turbo with nawz Join Date: Nov 2006 Location: On The Shaft Posts: 19,667 Blog Entries: 2 iTrader: 4 reviews	somebody said ssms was selling the plates for like $900 though __________________ MM 1 am boner crew Cars and mod list in garage i like veiny meat sliding between my buttcheeks

November 20th, 2007, 09:44 PM	#20
Stang6899 Hardcore Enthusiast Modded V6 Join Date: Sep 2006 Location: Mukilteo WA Posts: 1,466 iTrader: 1 reviews	If you could undercut ssms and sell yours for $500 you'd have a lot of buyers...I'd be one of them. __________________ 1999 e46 328i BMW - Daily Driver 2001 SVT Cobra - Project 1995 v6 vert - SOLD 1996 v6 vert - SOLD 1995 v6 vert #2 - SOLD 1995 GT - SOLD 1997 v6 coupe - Parting

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: M-112 Adapter Intake Manifold
Thread	Thread Starter	Forum	Replies	Last Post
Swapping a 98 V6 intake manifold with for a 99 V6 manifold	98mustang	V6 Mustangs	6	November 20th, 2010 11:20 PM
need a intake manifold	matfernan1	99-04	22	September 27th, 2007 11:54 PM
Intake Manifold	jbm5781	96-98	11	August 16th, 2007 11:28 PM
Oil under intake manifold??	lil666	99-04	4	May 17th, 2007 07:56 PM
Which Intake Manifold	bobnice	5.0 Mustangs	10	October 2nd, 2006 09:59 AM

All times are GMT -4. The time now is 06:23 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.