[Hourofpain]

Originally Posted by Darrin I don't want to start a war here, but as a performance transmission builder I have to tell you that I don't like the way these TransGo shift kits do their thing. You have to make modifications that can actually shorten the life of the transmission and once done are not really reversible for the average Joe. If anyone needs any products or just some instructions on modifications that can be done to these transmissions that will not only provide the shifting you want but also improve the life and durability of the transmission then just message me and let me know. Here is my web page BC Automotive Darrin

The modifications that you do to the valve body have been perfected already and its the only sure way to increase the durability besides the springs and little components they give you to replace

not just eh drill a hole here and hope for luck

[Darrin]

Originally Posted by Hourofpain The modifications that you do to the valve body have been perfected already and its the only sure way to increase the durability besides the springs and little components they give you to replace not just eh drill a hole here and hope for luck

I really hate to keep replying to you that you are not properly informed on this transmission stuff, but you just simply are not properly informed on this transmission stuff..

Do you have a complete understanding of what these kits have you do to the valve body and transmission? Do you know why they have you drill holes and insert extra springs and washers? Do you know why they have you block off a passage in the transmission case and what that passage does and what the end result can be?

I do. I have been doing this for a very, very long time.

Darrin

[sleeper]

try the web site supersixmotorsports.com they deal a lot with 6 cyl cars and they are really nice they will have all the answers to your questions

[jdansby1]

Sleeper, dont bump old threads.