[wannabeimportkiller]

Hey guys, i need to know if the 99-04 tranny's are the exact same thing as the 98's? Anybody know anything about this???

[wannabeimportkiller]

O and are the auto tranny's in the v6 the same as the gt?

[wannabeimportkiller]

Come on guys. Green where you at?

[Onemanzu]

they will transfer and 96-04 autos should be the same... 4r70w

if it is a 4r70w then it will work as long as you change the bell housing

[wannabeimportkiller]

ok thanks that helps a lil, the bushing is out in the tail, and FORD dont even sell that part anymore. go figure. they will sell me the whole tail housing gladly for 150 bucks though

[Onemanzu]

ah... that sucks... if you are just replacing the tail on an auto ... as long as its from a 4r70w it has a very high chance of working... i cannot guarantee this information though

[HMUSN]

time to hit the junk yard

[GreenFaleen]

yeah any seal form a 96-04 auto tranny will work, and im pretty sure the seal will work from a gt as well

[El_Cangri]

Originally Posted by Onemanzu ah... that sucks... if you are just replacing the tail on an auto ... as long as its from a 4r70w it has a very high chance of working... i cannot guarantee this information though

yes it will work tho i would try n use 1 of the same year just in case tho im sure they r pretty much d same. PSP texting ftl!!!again

[Dodd]

Originally Posted by El_Cangri yes it will work tho i would try n use 1 of the same year just in case tho im sure they r pretty much d same. PSP texting ftl!!!again

Originally Posted by GreenFaleen yeah any seal form a 96-04 auto tranny will work, and im pretty sure the seal will work from a gt as well

Originally Posted by HMUSN time to hit the junk yard

Did anyone think about asking a local Car Quest? I deal with then on a daily basis and get several tranny parts from them, they should have an extension housing seal.......

[Hourofpain]

they arent
Ours is electronically controlled by the engines computer and have no gear cable to the speedometer

[wannabeimportkiller]

Yeh i have the seal, i needed the bushing, sooo we had to go like 30 miles up the road to get it, we got home and the bushing wasnt even the right size, imagine that, by dad was sooooo mad, then he got to looking, and what we have fits an old tranny, like fox body old atleast, we havea drive shaft from about an 85 layng around, so he calls em back tells em what we have, the mentions that is a 4r70w, and they were like ooo its that one, yeh we dont carry that. Ford Dealership says the same thing, plus they cant even order it which is the stupidest thing ive ever heard of. But my dad got to looking around online, and found a website that sales the bushing for like 2.25 i was like your telling me i have to order a 2.25 cent part off of the internet. Sorry for the rant just thought id update you. O by the way we think a solenoid is out in it.

[Dodd]

Originally Posted by Hourofpain they arent Ours is electronically controlled by the engines computer and have no gear cable to the speedometer

Are you retarted? I'm a sextuple certified technician and deal with problems like this on a daily basis. You CAN buy seals for our transmission at a Car Quest, I do so on a DAILY basis, for those of you who think I am full of crap, go to school and learn something, then you might be able to understand what I am saying.......


Being an electronic trans has nothing to do with a seal leaking or the computer knowing how fast you are going, Being electronic acctually helps, it points un to the right direction faster then you mgiht think as then we have a DTC to go off of. Big whoop if I get a bad rep for this, I don't care anymore, your all sub 20 punks that don't know anything about cars and try to play racer with a 6 instead of making it a daily driver like it's meant to be. Racer is only ment to be played on an 8, 6ers ain't shit, pull up your pants and gro the fuck up.......

[graystang01]

calm down... if u think ppl r wrong correct em... there is no need 2 bring that shit on here... i can just about bet that u wouldnt say that to the face of anyone on this forum

[wannabeimportkiller]

Car quest sells them then?? not the SEAL!! the BUSHING in the end of the housing, and it HAS to be for the 4r70w tranny aod-e ?

[GreenFaleen]

the bushing you will probably only find on the internet, and a shift solenoid being out is a good possibility, but you would be bouncing into that gear everytime if that was the case

[Onemanzu]

Originally Posted by Dodd Are you retarted? I'm a sextuple certified technician and deal with problems like this on a daily basis. You CAN buy seals for our transmission at a Car Quest, I do so on a DAILY basis, for those of you who think I am full of crap, go to school and learn something, then you might be able to understand what I am saying.......

No need to call people names... it makes you look immature... and you have stated your opinion "go to car quest" ... what if there isn't on in his town? what if they don't have it? ...

You sir need to take a step away from the key board, and come back once you are relaxed...

wannabe-
Auto Parts and Accessories Catalog - 1998 Ford Mustang Output Shaft Seal

check there... if thats not it keep clicking around that site, they have almost everything imaginable

[tjames]

Originally Posted by Dodd Are you retarted? I'm a sextuple certified technician and deal with problems like this on a daily basis. You CAN buy seals for our transmission at a Car Quest, I do so on a DAILY basis, for those of you who think I am full of crap, go to school and learn something, then you might be able to understand what I am saying....... Being an electronic trans has nothing to do with a seal leaking or the computer knowing how fast you are going, Being electronic acctually helps, it points un to the right direction faster then you mgiht think as then we have a DTC to go off of. Big whoop if I get a bad rep for this, I don't care anymore, your all sub 20 punks that don't know anything about cars and try to play racer with a 6 instead of making it a daily driver like it's meant to be. Racer is only ment to be played on an 8, 6ers ain't shit, pull up your pants and gro the fuck up.......

dude you need to relax noob. if you think someone is wrong correct them dont start calling people names and then start talking shit on the very cars we drive, just because someone wants to made a fast or better then stock 6 doesnt make them a retard or a bad person, i actually think its great that so many guys myself included enjoy working on their 6er. chris torres can smoke V8's all day with his turbo set up and i know a few others also on this site and others. also i have seen some misinformation coming from you in other posts. you claim to be in automechanics but lack the knowlege of some basic things and came to this site thinking you are some kind of know all hero of the car world. if you want to help here and give good useful information please do, if not you are wasting your time and ours. if you are wrong people are going to correct you and you cant get all defensive about it, no one knows everything about every question. you need to relax and if you think someone has posted incorrect information correct them, dont call them names and go out on rants because you yourself so far have posted misinformation in other posts. so either calm down or dont post simple as that especcially immature post such as your last one name calling and talking shit on our cars, you called us sub 20 punks when you yourself are acting like a 10 year old, perhaps its you who needs to grow up and stop thinking you are better then everyone because you claim you work at an auto shop

[HMUSN]

Originally Posted by tjames no one knows everything about every question.

pudding. nuff said

[Onemanzu]

find what your looking for?