what size piping is best?

dgt_mustang · January 1st, 2008, 02:53 PM

okay, im getting the dual exhaust setup in the next 2 weeks, but what size piping is good? getting the flowmaster 40s, but theirs an offset number and inset number and im not familiar with this area at all...lotta info needed on what to get here. thanx.

Onemanzu · January 1st, 2008, 02:54 PM

O

that size...

If your only modification is exhaust then 2.25... if you are planning on a few more mods then 2.5

tjames · January 1st, 2008, 02:59 PM

Originally Posted by dgt_mustang

okay, im getting the dual exhaust setup in the next 2 weeks, but what size piping is good? getting the flowmaster 40s, but theirs an offset number and inset number and im not familiar with this area at all...lotta info needed on what to get here. thanx.

i went 2.5" and dont regret it at all

dgt_mustang · January 1st, 2008, 02:59 PM

if i get 2.5 what other mods would i think about getting? future mods right now only consist of t-lok, and 3.73 gears, maybe new headers down the road, and underdrive pulleys. already got tuner.

tjames · January 1st, 2008, 03:00 PM

Originally Posted by dgt_mustang

if i get 2.5 what other mods would i think about getting? future mods right now only consist of t-lok, and 3.73 gears, maybe new headers down the road, and underdrive pulleys. already got tuner.

then 2.5 all the way!

dgt_mustang · January 1st, 2008, 03:01 PM

sweet, 2.5 it is, what about the offset and inset of the muffler? 2.5 there to?

tjames · January 1st, 2008, 03:03 PM

Originally Posted by dgt_mustang

sweet, 2.5 it is, what about the offset and inset of the muffler? 2.5 there to?

yes the inlet/outlet has to be 2.5 also and get offset/offset

whitemustang02 · January 1st, 2008, 03:03 PM

ya other wize u will have to have to get a reducer to get them to fit because the pipe wont mach up

graystang01 · January 1st, 2008, 03:03 PM

i plan on gettin 2.5 when i get my exhaust

Onemanzu · January 1st, 2008, 03:11 PM

Originally Posted by whitemustang02

ya other wize u will have to have to get a reducer to get them to fit because the pipe wont mach up

the shop should take care of this

tjames · January 1st, 2008, 03:12 PM

Originally Posted by Onemanzu

the shop should take care of this

ya they can weld it so it fits

dgt_mustang · January 1st, 2008, 03:32 PM

whats offset/offset mean?

Onemanzu · January 1st, 2008, 03:33 PM

its the muffler set up...

offset enter, offset exit...

the shop will take care of that

tjames · January 1st, 2008, 03:34 PM

Originally Posted by dgt_mustang

whats offset/offset mean?

it means the inlet and outlet are offset not in the middle of the muffler, you need it that way so it will fit the right way under thre car

dgt_mustang · January 1st, 2008, 03:36 PM

eBay Motors: Flowmaster Original 40 Series Muffler 2.5" O/O 42543 (item 130185299835 end time Jan-03-08 15:09:06 PST)

these are the ones im planning on order tomorrow night

tjames · January 1st, 2008, 03:39 PM

Originally Posted by dgt_mustang

eBay Motors: Flowmaster Original 40 Series Muffler 2.5" O/O 42543 (item 130185299835 end time Jan-03-08 15:09:06 PST)

these are the ones im planning on order tomorrow night

those are perfect, exactly what you need!! your going to love the way it sounds! i love my original 40's

dgt_mustang · January 1st, 2008, 03:39 PM

sweet, im getting really excited for the time when they come in. thanx for the help guys.

tjames · January 1st, 2008, 03:41 PM

Originally Posted by dgt_mustang

sweet, im getting really excited for the time when they come in. thanx for the help guys.

no problem, post sounds clips and pics when its done

dgt_mustang · January 1st, 2008, 03:42 PM

on estimate how much you think it would cost for them to put them on? with the 2.5 piping and all.

dgt_mustang · January 1st, 2008, 03:42 PM

will do with the sound clips.

January 1st, 2008, 02:53 PM	#1
dgt_mustang Enthusiast 01 mustang Join Date: Jun 2007 Location: goose creek Posts: 960	what size piping is best? okay, im getting the dual exhaust setup in the next 2 weeks, but what size piping is good? getting the flowmaster 40s, but theirs an offset number and inset number and im not familiar with this area at all...lotta info needed on what to get here. thanx. __________________ LEAVE REP POINTS WHERE NEEDED!!! 2001 mustang V6 CAI,Tuner,Cobra Rims To come: UDP, T-lok, 3.73, full exhaust setup W/flowmaster 40s, aluminum driveshaft.

January 1st, 2008, 02:59 PM	#4
dgt_mustang Enthusiast 01 mustang Join Date: Jun 2007 Location: goose creek Posts: 960	if i get 2.5 what other mods would i think about getting? future mods right now only consist of t-lok, and 3.73 gears, maybe new headers down the road, and underdrive pulleys. already got tuner. __________________ LEAVE REP POINTS WHERE NEEDED!!! 2001 mustang V6 CAI,Tuner,Cobra Rims To come: UDP, T-lok, 3.73, full exhaust setup W/flowmaster 40s, aluminum driveshaft.

January 1st, 2008, 03:01 PM	#6
dgt_mustang Enthusiast 01 mustang Join Date: Jun 2007 Location: goose creek Posts: 960	sweet, 2.5 it is, what about the offset and inset of the muffler? 2.5 there to? __________________ LEAVE REP POINTS WHERE NEEDED!!! 2001 mustang V6 CAI,Tuner,Cobra Rims To come: UDP, T-lok, 3.73, full exhaust setup W/flowmaster 40s, aluminum driveshaft.

January 1st, 2008, 03:32 PM	#12
dgt_mustang Enthusiast 01 mustang Join Date: Jun 2007 Location: goose creek Posts: 960	whats offset/offset mean? __________________ LEAVE REP POINTS WHERE NEEDED!!! 2001 mustang V6 CAI,Tuner,Cobra Rims To come: UDP, T-lok, 3.73, full exhaust setup W/flowmaster 40s, aluminum driveshaft.

January 1st, 2008, 03:36 PM	#15
dgt_mustang Enthusiast 01 mustang Join Date: Jun 2007 Location: goose creek Posts: 960	eBay Motors: Flowmaster Original 40 Series Muffler 2.5" O/O 42543 (item 130185299835 end time Jan-03-08 15:09:06 PST) these are the ones im planning on order tomorrow night __________________ LEAVE REP POINTS WHERE NEEDED!!! 2001 mustang V6 CAI,Tuner,Cobra Rims To come: UDP, T-lok, 3.73, full exhaust setup W/flowmaster 40s, aluminum driveshaft.

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

January 1st, 2008, 03:39 PM	#17
dgt_mustang Enthusiast 01 mustang Join Date: Jun 2007 Location: goose creek Posts: 960	sweet, im getting really excited for the time when they come in. thanx for the help guys. __________________ LEAVE REP POINTS WHERE NEEDED!!! 2001 mustang V6 CAI,Tuner,Cobra Rims To come: UDP, T-lok, 3.73, full exhaust setup W/flowmaster 40s, aluminum driveshaft.

January 1st, 2008, 03:42 PM	#19
dgt_mustang Enthusiast 01 mustang Join Date: Jun 2007 Location: goose creek Posts: 960	on estimate how much you think it would cost for them to put them on? with the 2.5 piping and all. __________________ LEAVE REP POINTS WHERE NEEDED!!! 2001 mustang V6 CAI,Tuner,Cobra Rims To come: UDP, T-lok, 3.73, full exhaust setup W/flowmaster 40s, aluminum driveshaft.

January 1st, 2008, 03:42 PM	#20
dgt_mustang Enthusiast 01 mustang Join Date: Jun 2007 Location: goose creek Posts: 960	will do with the sound clips. __________________ LEAVE REP POINTS WHERE NEEDED!!! 2001 mustang V6 CAI,Tuner,Cobra Rims To come: UDP, T-lok, 3.73, full exhaust setup W/flowmaster 40s, aluminum driveshaft.

Threads Similar to: what size piping is best?
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust Piping	Mustang RacR94	99-04	21	November 15th, 2007 07:55 AM
exhaust piping	VSR13	Exhaust	7	October 27th, 2007 10:22 AM
Exhaust piping size question.	Orangester	V6 Mustangs	5	August 13th, 2007 09:50 AM
'67 piping	Xman	Classic Mustangs	5	April 26th, 2007 06:28 PM
EGR piping pissin me off	00SoSlow	V6 Mustangs	11	June 13th, 2006 09:23 AM

All times are GMT -4. The time now is 12:01 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.