Carbon Fiber Driveshaft

scxc15 · January 8th, 2008, 11:35 AM

Does anyone know what all companys make a carbon fiber drive shaft for our cars? Ive only managed to find one and there have to be more than that.

Cricket · January 8th, 2008, 11:39 AM

Good luck with that I have no clue. Just go for an aluminum driveshaft.

shadow5403 · January 8th, 2008, 11:40 AM

where can u find an aluminum one thatll fit an auto?

Cricket · January 8th, 2008, 11:44 AM

All you need to do to make it fit an auto is put the auto yoke on it, and your good to go. Thats the only difference is the yoke.

Juggalo_X · January 8th, 2008, 11:48 AM

Originally Posted by Cricket

All you need to do to make it fit an auto is put the auto yoke on it, and your good to go. Thats the only difference is the yoke.

you can get a cheap CHEAP! aluminum drive shaft off a 460 interceptor (police crown vic) in the scrap yard. all you have to do is change the yolks on it so it bolts up to your diff and then the slip yolk on the other end for the trany. Me and a mechanic buddy of mine measured the Interceptors drive shaft when it was in the dealership for service and it is the exact same length. then he said just change the yolks and your good to go.

shadow5403 · January 8th, 2008, 12:18 PM

so if i were to buy one brand new what model year would i look at? i heard 94/95 and then reuse yolk....yes?

tsp_2177 · January 8th, 2008, 02:48 PM

will the police interceptor drive shafts work for the s-197's?

Juggalo_X · January 8th, 2008, 02:49 PM

Originally Posted by tsp_2177

will the police interceptor drive shafts work for the s-197's?

im not sure. i only measured the new edge. and compared it to the interceptor. easy way to tell would be to see if a sn95 new edge and the s197 have the same OEM part # for the drive shaft or not. if they do then they are the same there for the same length there for the interceptors would work.

tsp_2177 · January 8th, 2008, 02:57 PM

cool i think ours are two piece, lemme guess yalls aren't?

shadow5403 · January 8th, 2008, 02:59 PM

for the 96 to 04 auto V6s this is what ive found.
Speed Concepts - M-4602-G - Aluminum Driveshaft for 1979-1995 Mustang/GT/Cobra 5.0L V8 and 1994-2004 3.8L V6

Juggalo_X · January 8th, 2008, 03:00 PM

Originally Posted by tsp_2177

cool i think ours are two piece, lemme guess yalls aren't?

nope 1 peice

tsp_2177 · January 8th, 2008, 03:01 PM

Originally Posted by Juggalo_X

nope 1 peice

damn

whitemustang02 · January 8th, 2008, 03:58 PM

u can use ones for a gt of maching years and it should fit

scxc15 · January 8th, 2008, 07:30 PM

Do all Intercepters have aluminum driveshafts? What year do I need to find?

WAR-PARTY · January 8th, 2008, 08:29 PM

carbon about 2k form Modular Mustang Racing (MMR)

Juggalo_X · January 8th, 2008, 08:41 PM

Originally Posted by scxc15

Do all Intercepters have aluminum driveshafts? What year do I need to find?

all the ones i have seen and id say 99-03 id look for cuz those r the only interceptors i have seen... all same drive tran

tjames · January 9th, 2008, 01:41 AM

ask and you shall recieve

Ford Racing M-4602-G Aluminum Driveshaft 1994-2004 V6 + GT

scxc15 · January 9th, 2008, 01:57 AM

Except for the fact you can get it form AmericanMuscle for the same price AND free shipping.....probably faster too.

tjames · January 9th, 2008, 02:24 AM

thats because that is AM's driveshaft they sell. chipsv6specialties.com has a contract with them and sell certain things off their website, so shipping will be the same

tjames · January 9th, 2008, 02:26 AM

notice the picture on chipsv6specialties.com is the same one taken from Am

he sells certain products from AM on their website

January 8th, 2008, 11:35 AM	#1
scxc15 Enthusiast 2003 Mach 1 12.7@107 Join Date: Dec 2006 Location: East Tennessee Posts: 819 iTrader: 1 reviews	Carbon Fiber Driveshaft Does anyone know what all companys make a carbon fiber drive shaft for our cars? Ive only managed to find one and there have to be more than that.

January 8th, 2008, 11:40 AM	#3
shadow5403 Hardcore Enthusiast Join Date: Oct 2007 Location: PA Posts: 2,041 iTrader: 0 reviews	where can u find an aluminum one thatll fit an auto? __________________

January 8th, 2008, 12:18 PM	#6
shadow5403 Hardcore Enthusiast Join Date: Oct 2007 Location: PA Posts: 2,041 iTrader: 0 reviews	so if i were to buy one brand new what model year would i look at? i heard 94/95 and then reuse yolk....yes? __________________

January 8th, 2008, 02:48 PM	#7
tsp_2177 Hardcore Enthusiast 2005 Civic GAY! Join Date: Mar 2007 Location: Alabama Posts: 1,875 iTrader: 0 reviews	will the police interceptor drive shafts work for the s-197's? __________________ slow car member twinky times two the stangs gone pypes mid muffler catback with their X-pipe In the top 20 cool peoples list on MM potsticker in training

January 8th, 2008, 02:57 PM	#9
tsp_2177 Hardcore Enthusiast 2005 Civic GAY! Join Date: Mar 2007 Location: Alabama Posts: 1,875 iTrader: 0 reviews	cool i think ours are two piece, lemme guess yalls aren't? __________________ slow car member twinky times two the stangs gone pypes mid muffler catback with their X-pipe In the top 20 cool peoples list on MM potsticker in training

January 8th, 2008, 02:59 PM	#10
shadow5403 Hardcore Enthusiast Join Date: Oct 2007 Location: PA Posts: 2,041 iTrader: 0 reviews	for the 96 to 04 auto V6s this is what ive found. Speed Concepts - M-4602-G - Aluminum Driveshaft for 1979-1995 Mustang/GT/Cobra 5.0L V8 and 1994-2004 3.8L V6 __________________

January 8th, 2008, 03:58 PM	#13
whitemustang02 MM's official Chevy guy 2002 Mustang V6 Join Date: Sep 2007 Location: Rochester, NY Posts: 2,026 iTrader: 0 reviews	u can use ones for a gt of maching years and it should fit __________________ "Speak softly and carry a big stick" - Theodore Roosevelt "Any idiot can make a V8 fast, it takes a real idiot to make a fast V6". '02 Mustang N/A 4.3 stroker away for winter '72 Chevelle project car 454 coming '93 Bronco EFI 351W DD

January 8th, 2008, 07:30 PM	#14
scxc15 Enthusiast 2003 Mach 1 12.7@107 Join Date: Dec 2006 Location: East Tennessee Posts: 819 iTrader: 1 reviews	Do all Intercepters have aluminum driveshafts? What year do I need to find?

January 8th, 2008, 08:29 PM	#15
WAR-PARTY Hardcore Enthusiast 2001 YUGO GT Join Date: Aug 2006 Location: GOAT LOCKER PENSACOLA FL Posts: 1,701 Blog Entries: 1 iTrader: 0 reviews	carbon about 2k form Modular Mustang Racing (MMR) __________________ How I met my wife! Our first date...

January 9th, 2008, 01:57 AM	#18
scxc15 Enthusiast 2003 Mach 1 12.7@107 Join Date: Dec 2006 Location: East Tennessee Posts: 819 iTrader: 1 reviews	Except for the fact you can get it form AmericanMuscle for the same price AND free shipping.....probably faster too.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Carbon Fiber Driveshaft
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber	COBRA5	Visual	6	July 29th, 2007 04:27 AM
CARBON FIBER HOOD	347tt	99-04	11	May 13th, 2007 05:40 AM
Carbon Fiber Trunk	703StangGT	96-98	6	November 3rd, 2006 09:24 PM
Carbon Fiber Driveshaft	cooktheworld	5.0 Mustangs	5	November 1st, 2006 09:50 AM
carbon fiber cai?	artisan00	General Tech	3	January 27th, 2006 05:16 PM

All times are GMT -4. The time now is 12:39 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.