CEL p1233

bone_crusher · February 3rd, 2008, 05:52 PM

i just got done changing my fuel filter and i popped code P1233, its the fuel pump, how can i fix this i was nowhere near the fuel pump. all i did was un plug the inertia switch?

ways to fix???

HMUSN · February 3rd, 2008, 06:02 PM

push it back in and take your neg cable off for a few minutes.

bone_crusher · February 3rd, 2008, 06:04 PM

oh its pluged it back in, and i cleared it already. i just wanted to be sure that i wasnt about to go driving around town with a faulty fuel pump

:ca unpluging the inertia switch pop that code? and wouldnt pluging it back in make it go away?

HMUSN · February 3rd, 2008, 06:07 PM

if your pump was faulty your car wouldn't run bro.

ROUSHME661 · February 4th, 2008, 12:59 AM

have you vhecked the fuel filter to make sure you put it the right way ..there should be an arrow in the direction of flow

February 4th, 2008, 12:59 AM	#5
ROUSHME661 Enthusiast Join Date: Mar 2007 Location: Lamont CA Posts: 666	have you vhecked the fuel filter to make sure you put it the right way ..there should be an arrow in the direction of flow __________________ 01 v6 true duals with 40 series flows and custom h pipe cold air intake http://www.myspace.com/xxarsonfreakxx (PERSONAL) http://www.myspace.com/vicious_racing (THE STANG FAMILY)

All times are GMT -4. The time now is 12:25 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.