[HaterOrLovers]

I bought a universal tube with a K&N filter and another smaller filter i forgot what it is called , Anyways i have a 2003 3.8 6cly mustang, the problem i noticed is when i driving and i rev my engine then release the car will rock foward and back real fast it seems more towards the back it rocks, it is a kind of violent rock i dont think its a normal rocking motion because friends have them and they dont have this problem, If u know nething about this please leave some information so i can figure out what the problem is.Also i have the Service engine sign on my dashboard lit up to.

[whitemustang02]

do u have ur maf instaled or did u remove it when u put the cai in

[GreenFaleen]

get the code, and you aren't supposed to have a breather filter, either run a line to your IAT if you have it or plug that hole where the smaller filter is

[itschristorres8]

this doesnt sound CAI related at all. can you describe the rock a little more?

[GreenFaleen]

Originally Posted by itschristorres8 this doesnt sound CAI related at all. can you describe the rock a little more?

if he has his IAT hose not plugged in he would hop like crazy

[HaterOrLovers]

i have the hose hooked up to the smaller breather filter and the bigger filter is hooked up to my tube , i did plug the hole with the small rubber piece and i took my old filter out completly , From my old filter i had wires pluged into it , so i took out the chip or little black box inside the old filter and plugged the wires into that then tied it securly into a hole with these bands

[HaterOrLovers]

and what code are u talking bout

[whitemustang02]

the one from ur cel, go to auto zone and tell them u have a cel.

[itschristorres8]

also your sig is kinda...

[HMUSN]

ya gotta start somewhere chris

[GreenFaleen]

Originally Posted by HaterOrLovers i have the hose hooked up to the smaller breather filter and the bigger filter is hooked up to my tube , i did plug the hole with the small rubber piece and i took my old filter out completly , From my old filter i had wires pluged into it , so i took out the chip or little black box inside the old filter and plugged the wires into that then tied it securly into a hole with these bands

ok
1. take off breather filter and attach the hose to the hole.

2. the little black box is your MAF can you get a pic of what you did with the wires cause Im guessing thats your problem

[HaterOrLovers]

wtf a cel lol

[HMUSN]

Originally Posted by HaterOrLovers wtf a cel lol

cel= check engine light

[HaterOrLovers]

yea i can but might take a lil bit im busy

[GreenFaleen]

thats kool, but that little black box is important lol

[HaterOrLovers]

ye i have the wires hooked up to it , i jus took the box out of the filter so i dont have to waste space by putting the whole filter in there again

[GreenFaleen]

Originally Posted by HaterOrLovers ye i have the wires hooked up to it , i jus took the box out of the filter so i dont have to waste space by putting the whole filter in there again

im confused? box in your filter, you mean the stock piece of metal pipe? or what

[HaterOrLovers]

na i took off my whole filter setup from the stock mustang, in the black filter is a little black box where these wires hook up to , i unplugged the wires to put in my cai then when i was done i unscrewed the little black sensor box that was in the stock filter and plugged the old wires back into it then jus secured it under my hood with some bands

[GreenFaleen]

ok that sensor box should go into the CAI pipe

[Hourofpain]

fuck it

put the stock shit back on and buy semthing else
anything