exhaust install?

motorhead6776 · February 7th, 2008, 08:25 PM

so im going to pick up my exhaust tomorrow. gt take-offs with flowmaster mufflers and a gt h pipe. is there anything i should need that i dont have for the install on saterday. exhaust hangers? rear o2 sensors?

Onemanzu · February 7th, 2008, 09:05 PM

hangers and some WD40... and look into renting a break bar

whitemustang02 · February 7th, 2008, 09:07 PM

Originally Posted by Onemanzu

hangers and some WD40... and look into renting a break bar

get a braker bar, u will thank ur self in the end.

Onemanzu · February 7th, 2008, 09:08 PM

I ended up using some square piping that fit over the end of the wrench...

whitemustang02 · February 7th, 2008, 09:09 PM

ya i just used wd-40 a braker bar and 16in biceps lol

motorhead6776 · February 7th, 2008, 09:21 PM

lol i got a sweet pipe stuck on a wrench so i should be set there.

shadow5403 · February 8th, 2008, 10:54 AM

what exactly are you using the break bar for?

Onemanzu · February 8th, 2008, 11:01 AM

Originally Posted by shadow5403

what exactly are you using the break bar for?

its kinda a bitch to get a 10 year old rusted bolt off... specially the one that connects the headers and Mid pipe together

shadow5403 · February 8th, 2008, 11:04 AM

ever use liquid wrench? Plus i used a saws all to remove my stock exhaust....the hell with taking it apart when its goin right in a dumpster.

Onemanzu · February 8th, 2008, 11:07 AM

thats true i forgot i did that too...

i saw'd after the muffler and then started ripping it all apart from there

GreenFaleen · February 8th, 2008, 11:28 AM

breaker bar is kinda hard to use if your on jack stands, so if thats your situations, WD-40 and a open wrench and a rubber mallet, pull on the bolt a bit and tap it with the hammer the shock will tap it loose its a great little trick kinda like an impact driver for stuck screws

motorhead6776 · February 8th, 2008, 12:34 PM

could i just use an impact gun or would that break something?

GreenFaleen · February 8th, 2008, 01:58 PM

Originally Posted by motorhead6776

could i just use an impact gun or would that break something?

no do not use an impact gun

SSStang · February 8th, 2008, 02:24 PM

You weaklings need to hit the gym, specially OMZ mr 3day header install.

Just use some wd40 on the bolts before you get ready to do the job.

whitemustang02 · February 8th, 2008, 02:29 PM

Originally Posted by SSStang

You weaklings need to hit the gym, specially OMZ mr 3day header install.

Just use some wd40 on the bolts before you get ready to do the job.

i know your not talking to me.

SSStang · February 8th, 2008, 02:33 PM

Originally Posted by whitemustang02

i know your not talking to me.

Maybe I am, but either way you need to learn how to spell, and use proper grammar.

whitemustang02 · February 8th, 2008, 02:38 PM

Originally Posted by SSStang

Maybe I am, but either way you need to learn how to spell, and use proper grammar.

The sad this is that my spelling is much better then it used to be, but yes I could work on my grammar a little.

Also I don’t need to hit the gym, but I’m going to go any way, because it is part of my schedule, 6 days a week of lifting FTW

shadow5403 · February 8th, 2008, 02:40 PM

until some scrawny little turd hits ya with a baseball bat FTL

SSStang · February 8th, 2008, 02:41 PM

Originally Posted by whitemustang02

The sad this is that my spelling is much better then it used to be, but yes I could work on my grammar a little.

Also I don’t need to hit the gym, but I’m going to go any way, because it is part of my schedule, 6 days a week of lifting FTW

Ha, their was a time I couldn't spell...
I cut down to 5days, muscles resting = build ftmfw!
/end thread jack

February 7th, 2008, 08:25 PM	#1
motorhead6776 Regular 2003 Mustang Join Date: Oct 2006 Location: Plaistow NH Posts: 392	exhaust install? so im going to pick up my exhaust tomorrow. gt take-offs with flowmaster mufflers and a gt h pipe. is there anything i should need that i dont have for the install on saterday. exhaust hangers? rear o2 sensors? __________________ K&N CAI, GT Takeoffs w/ Flowmaster super 40's

February 7th, 2008, 09:21 PM	#6
motorhead6776 Regular 2003 Mustang Join Date: Oct 2006 Location: Plaistow NH Posts: 392	lol i got a sweet pipe stuck on a wrench so i should be set there. __________________ K&N CAI, GT Takeoffs w/ Flowmaster super 40's

February 8th, 2008, 10:54 AM	#7
shadow5403 Hardcore Enthusiast 2000 V6 Mustang Join Date: Oct 2007 Location: PA Posts: 2,028	what exactly are you using the break bar for? __________________ http://www.angelfire.com/pro2/shadowx/mustang_pics

February 8th, 2008, 11:04 AM	#9
shadow5403 Hardcore Enthusiast 2000 V6 Mustang Join Date: Oct 2007 Location: PA Posts: 2,028	ever use liquid wrench? Plus i used a saws all to remove my stock exhaust....the hell with taking it apart when its goin right in a dumpster. __________________ http://www.angelfire.com/pro2/shadowx/mustang_pics

February 8th, 2008, 11:28 AM	#11
GreenFaleen Resident MM Ricer 2006 Scion tC 13.9@103/8.9@81 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 8,686	breaker bar is kinda hard to use if your on jack stands, so if thats your situations, WD-40 and a open wrench and a rubber mallet, pull on the bolt a bit and tap it with the hammer the shock will tap it loose its a great little trick kinda like an impact driver for stuck screws __________________ Buy My Guitar and Amp Scion Tc-strup racing header, CAI, Ground Kit, NOS 100shot tuning and install in process, Custom suspension, Doc. I 50% STS "Horsepower sells cars, torque wins races." -Carroll Shelby Thanks To My Sponsors: Strup Performance

February 8th, 2008, 12:34 PM	#12
motorhead6776 Regular 2003 Mustang Join Date: Oct 2006 Location: Plaistow NH Posts: 392	could i just use an impact gun or would that break something? __________________ K&N CAI, GT Takeoffs w/ Flowmaster super 40's

February 8th, 2008, 02:24 PM	#14
SSStang I Post Entirely Way Too Much 2k2 Mustang V6 Join Date: Feb 2007 Location: TEXAS Posts: 5,678	You weaklings need to hit the gym, specially OMZ mr 3day header install. Just use some wd40 on the bolts before you get ready to do the job. __________________

February 8th, 2008, 02:40 PM	#18
shadow5403 Hardcore Enthusiast 2000 V6 Mustang Join Date: Oct 2007 Location: PA Posts: 2,028	until some scrawny little turd hits ya with a baseball bat FTL __________________ http://www.angelfire.com/pro2/shadowx/mustang_pics

Threads Similar to: exhaust install?
Thread	Thread Starter	Forum	Replies	Last Post
exhaust install	Jucostud	2005+	2	August 31st, 2007 02:06 PM
just got exhaust install	01stanggt	Modular Mustangs	9	July 1st, 2007 06:51 PM
Exhaust install pricing	TweederGT03	99-04	7	June 15th, 2007 12:09 PM
exhaust install	oklahomastate8	V6 Mustangs	5	May 4th, 2007 12:02 AM
Exhaust install	99v6stang	V6 Mustangs	8	March 5th, 2007 07:11 PM

All times are GMT -4. The time now is 05:10 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.