exhaust install?

motorhead6776 · February 7th, 2008, 08:25 PM

so im going to pick up my exhaust tomorrow. gt take-offs with flowmaster mufflers and a gt h pipe. is there anything i should need that i dont have for the install on saterday. exhaust hangers? rear o2 sensors?

Onemanzu · February 7th, 2008, 09:05 PM

hangers and some WD40... and look into renting a break bar

whitemustang02 · February 7th, 2008, 09:07 PM

Originally Posted by Onemanzu

hangers and some WD40... and look into renting a break bar

get a braker bar, u will thank ur self in the end.

Onemanzu · February 7th, 2008, 09:08 PM

I ended up using some square piping that fit over the end of the wrench...

whitemustang02 · February 7th, 2008, 09:09 PM

ya i just used wd-40 a braker bar and 16in biceps lol

motorhead6776 · February 7th, 2008, 09:21 PM

lol i got a sweet pipe stuck on a wrench so i should be set there.

shadow5403 · February 8th, 2008, 10:54 AM

what exactly are you using the break bar for?

Onemanzu · February 8th, 2008, 11:01 AM

Originally Posted by shadow5403

what exactly are you using the break bar for?

its kinda a bitch to get a 10 year old rusted bolt off... specially the one that connects the headers and Mid pipe together

shadow5403 · February 8th, 2008, 11:04 AM

ever use liquid wrench? Plus i used a saws all to remove my stock exhaust....the hell with taking it apart when its goin right in a dumpster.

Onemanzu · February 8th, 2008, 11:07 AM

thats true i forgot i did that too...

i saw'd after the muffler and then started ripping it all apart from there

GreenFaleen · February 8th, 2008, 11:28 AM

breaker bar is kinda hard to use if your on jack stands, so if thats your situations, WD-40 and a open wrench and a rubber mallet, pull on the bolt a bit and tap it with the hammer the shock will tap it loose its a great little trick kinda like an impact driver for stuck screws

motorhead6776 · February 8th, 2008, 12:34 PM

could i just use an impact gun or would that break something?

GreenFaleen · February 8th, 2008, 01:58 PM

Originally Posted by motorhead6776

could i just use an impact gun or would that break something?

no do not use an impact gun

ESG-642T · February 8th, 2008, 02:24 PM

You weaklings need to hit the gym, specially OMZ mr 3day header install.

Just use some wd40 on the bolts before you get ready to do the job.

whitemustang02 · February 8th, 2008, 02:29 PM

Originally Posted by SSStang

You weaklings need to hit the gym, specially OMZ mr 3day header install.

Just use some wd40 on the bolts before you get ready to do the job.

i know your not talking to me.

ESG-642T · February 8th, 2008, 02:33 PM

Originally Posted by whitemustang02

i know your not talking to me.

Maybe I am, but either way you need to learn how to spell, and use proper grammar.

whitemustang02 · February 8th, 2008, 02:38 PM

Originally Posted by SSStang

Maybe I am, but either way you need to learn how to spell, and use proper grammar.

The sad this is that my spelling is much better then it used to be, but yes I could work on my grammar a little.

Also I don’t need to hit the gym, but I’m going to go any way, because it is part of my schedule, 6 days a week of lifting FTW

shadow5403 · February 8th, 2008, 02:40 PM

until some scrawny little turd hits ya with a baseball bat FTL

ESG-642T · February 8th, 2008, 02:41 PM

Originally Posted by whitemustang02

The sad this is that my spelling is much better then it used to be, but yes I could work on my grammar a little.

Also I don’t need to hit the gym, but I’m going to go any way, because it is part of my schedule, 6 days a week of lifting FTW

Ha, their was a time I couldn't spell...
I cut down to 5days, muscles resting = build ftmfw!
/end thread jack

February 7th, 2008, 08:25 PM	#1
motorhead6776 Enthusiast 2003 Mustang 15.00@93.06 Join Date: Oct 2006 Location: Plaistow NH Posts: 546 iTrader: 1 reviews	exhaust install? so im going to pick up my exhaust tomorrow. gt take-offs with flowmaster mufflers and a gt h pipe. is there anything i should need that i dont have for the install on saterday. exhaust hangers? rear o2 sensors?

February 7th, 2008, 09:05 PM	#2
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	hangers and some WD40... and look into renting a break bar __________________ My Foz

February 7th, 2008, 09:08 PM	#4
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	I ended up using some square piping that fit over the end of the wrench... __________________ My Foz

February 7th, 2008, 09:09 PM	#5
whitemustang02 MM's official Chevy guy 2002 Mustang V6 Join Date: Sep 2007 Location: Rochester, NY Posts: 2,024 iTrader: 0 reviews	ya i just used wd-40 a braker bar and 16in biceps lol __________________ "Speak softly and carry a big stick" - Theodore Roosevelt "Any idiot can make a V8 fast, it takes a real idiot to make a fast V6". '02 Mustang N/A 4.3 stroker away for winter '72 Chevelle project car 454 coming '93 Bronco EFI 351W DD

February 8th, 2008, 10:54 AM	#7
shadow5403 Hardcore Enthusiast Join Date: Oct 2007 Location: PA Posts: 2,037 iTrader: 0 reviews	what exactly are you using the break bar for? __________________

February 7th, 2008, 09:21 PM	#6
motorhead6776 Enthusiast 2003 Mustang 15.00@93.06 Join Date: Oct 2006 Location: Plaistow NH Posts: 546 iTrader: 1 reviews	lol i got a sweet pipe stuck on a wrench so i should be set there.

February 8th, 2008, 11:04 AM	#9
shadow5403 Hardcore Enthusiast Join Date: Oct 2007 Location: PA Posts: 2,037 iTrader: 0 reviews	ever use liquid wrench? Plus i used a saws all to remove my stock exhaust....the hell with taking it apart when its goin right in a dumpster. __________________

February 8th, 2008, 11:07 AM	#10
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	thats true i forgot i did that too... i saw'd after the muffler and then started ripping it all apart from there __________________ My Foz

February 8th, 2008, 11:28 AM	#11
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,880 Blog Entries: 2 iTrader: 1 reviews	breaker bar is kinda hard to use if your on jack stands, so if thats your situations, WD-40 and a open wrench and a rubber mallet, pull on the bolt a bit and tap it with the hammer the shock will tap it loose its a great little trick kinda like an impact driver for stuck screws __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

February 8th, 2008, 12:34 PM	#12
motorhead6776 Enthusiast 2003 Mustang 15.00@93.06 Join Date: Oct 2006 Location: Plaistow NH Posts: 546 iTrader: 1 reviews	could i just use an impact gun or would that break something?

February 8th, 2008, 02:24 PM	#14
ESG-642T [8MINUS2] 2002, Ford, v6 Join Date: Feb 2007 Location: TEXAS Posts: 12,319 iTrader: 0 reviews	You weaklings need to hit the gym, specially OMZ mr 3day header install. Just use some wd40 on the bolts before you get ready to do the job. __________________ Hi, You can call me Kyle Random ESG fact: Had a prochamber on his v6 before it was popular. WTB: v6 BBK valve covers

February 8th, 2008, 02:40 PM	#18
shadow5403 Hardcore Enthusiast Join Date: Oct 2007 Location: PA Posts: 2,037 iTrader: 0 reviews	until some scrawny little turd hits ya with a baseball bat FTL __________________

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: exhaust install?
Thread	Thread Starter	Forum	Replies	Last Post
exhaust install	Jucostud	2005 - 2010	2	August 31st, 2007 02:06 PM
just got exhaust install	01stanggt	Modular Mustangs	9	July 1st, 2007 06:51 PM
Exhaust install pricing	TweederGT03	99-04	7	June 15th, 2007 12:09 PM
exhaust install	oklahomastate8	V6 Mustangs	5	May 4th, 2007 12:02 AM
Exhaust install	99v6stang	V6 Mustangs	8	March 5th, 2007 07:11 PM

All times are GMT -4. The time now is 04:53 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.