Hose covers

soccerboy08 · February 13th, 2008, 09:27 PM

I posted a while back on where to get hose and wire covers. And i found them at summitracing.com but they cost 11 bucks, and the shipping is 10 bucks. I didnt know if anyone else knew where i could get the same thing for alot cheaper. or anything.

GreenFaleen · February 13th, 2008, 09:30 PM

like wire loom? autozone 8 bucks for 10 feet

supercharged421 · February 13th, 2008, 09:34 PM

yeah thats what i was gonna say...
try autozone

El_Cangri · February 13th, 2008, 09:53 PM

autozone, pepboys and local auto shops (at least most of em) carry it

shadow5403 · February 14th, 2008, 09:36 AM

get heat shrink too if you want to make it look like stock....just a different color

El_Cangri · February 14th, 2008, 06:27 PM

ok what exactly heat shrink does?

GreenFaleen · February 14th, 2008, 06:33 PM

Originally Posted by El_Cangri

ok what exactly heat shrink does?

is a rubber that when heat is applied shrinks to a snug fit to protect wires and such, its like a step up from electricians tape.

El_Cangri · February 14th, 2008, 09:30 PM

ohh nice

HMUSN · February 14th, 2008, 09:32 PM

get an engine dress up kit.. it's like $40.00

El_Cangri · February 14th, 2008, 09:34 PM

gimme a nice link then

HMUSN · February 14th, 2008, 09:38 PM

it's at an auto zone.. it's generic. just look for the wire mesh stuff.

looks like this (the engine shot)

El_Cangri · February 14th, 2008, 09:40 PM

good good.. i'l check next time i go

GreenFaleen · February 14th, 2008, 09:49 PM

the specter engine dress up kit is 75-115 depending on if you get a radiator hose cover

riddlee josh · February 15th, 2008, 04:44 PM

hey can u give some links to the engine dress up. i've been looking for one.

06GT4RAD · February 15th, 2008, 05:49 PM

Do not get the covers they end up looking like ass. Your wasting your money. Get the real Spectre Braided hose or any other brand. Summit carries it all should run you around 100.00 with hose and ends depending on what you do.

Here is my engine with it.

riddlee josh · February 15th, 2008, 07:00 PM

dude that looks awesome

i love the hoses

look great.

El_Cangri · February 16th, 2008, 01:06 AM

dude that looks sick!!

i need to put my engine bay like that!

shadow5403 · February 16th, 2008, 01:53 PM

very nice sir

GreenFaleen · February 16th, 2008, 02:50 PM

Originally Posted by 06GT4RAD

and for reference

his bad ass engine vs autozone loom

whitemustang02 · February 16th, 2008, 03:01 PM

shaved engin bay and hiden wires FTMFW

February 13th, 2008, 09:27 PM	#1
soccerboy08 Regular 2002 Ford Mustang V6 Join Date: Feb 2007 Location: Greenville, South Carolina Posts: 130 iTrader: 0 reviews	Hose covers I posted a while back on where to get hose and wire covers. And i found them at summitracing.com but they cost 11 bucks, and the shipping is 10 bucks. I didnt know if anyone else knew where i could get the same thing for alot cheaper. or anything. __________________

February 13th, 2008, 09:30 PM	#2
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,880 Blog Entries: 2 iTrader: 1 reviews	like wire loom? autozone 8 bucks for 10 feet __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

February 14th, 2008, 09:36 AM	#5
shadow5403 Hardcore Enthusiast Join Date: Oct 2007 Location: PA Posts: 2,037 iTrader: 0 reviews	get heat shrink too if you want to make it look like stock....just a different color __________________

February 14th, 2008, 09:32 PM	#9
HMUSN Doc 1986 SVO 48.47@ 12.58 Join Date: Nov 2006 Posts: 37,050 iTrader: 11 reviews	get an engine dress up kit.. it's like $40.00 __________________

February 14th, 2008, 09:38 PM	#11
HMUSN Doc 1986 SVO 48.47@ 12.58 Join Date: Nov 2006 Posts: 37,050 iTrader: 11 reviews	it's at an auto zone.. it's generic. just look for the wire mesh stuff. looks like this (the engine shot) __________________

February 13th, 2008, 09:34 PM	#3
supercharged421 Regular 2004 Mustang n/a Join Date: Nov 2007 Location: East TN Posts: 159 iTrader: 0 reviews	yeah thats what i was gonna say... try autozone

February 14th, 2008, 09:49 PM	#13
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,880 Blog Entries: 2 iTrader: 1 reviews	the specter engine dress up kit is 75-115 depending on if you get a radiator hose cover __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

February 15th, 2008, 04:44 PM	#14
riddlee josh Enthusiast 1998 mustang 3.8l v6 Join Date: Nov 2007 Location: portsmouth ohio Posts: 811 iTrader: 0 reviews	hey can u give some links to the engine dress up. i've been looking for one. __________________ RACING because baseball,basketball, bowling,football, and golf only require one ball

February 15th, 2008, 05:49 PM	#15
06GT4RAD Regular 2006 Mustang GT Join Date: Nov 2007 Location: Nor-Cal Posts: 485 iTrader: 0 reviews	Do not get the covers they end up looking like ass. Your wasting your money. Get the real Spectre Braided hose or any other brand. Summit carries it all should run you around 100.00 with hose and ends depending on what you do. Here is my engine with it. __________________ 2006 Mustang GT-Borla Stingers, MGW Billet Interior & Underhood, Eibach Pro Kit w/Tokico D-Specs, Steeda Sway Bars, CHE Suspenson Upgrades, BBR Billet Control Arms, Foose 20" Nitrous, BFG g-Force KDWII

February 15th, 2008, 07:00 PM	#16
riddlee josh Enthusiast 1998 mustang 3.8l v6 Join Date: Nov 2007 Location: portsmouth ohio Posts: 811 iTrader: 0 reviews	dude that looks awesome i love the hoses look great. __________________ RACING because baseball,basketball, bowling,football, and golf only require one ball

February 16th, 2008, 01:53 PM	#18
shadow5403 Hardcore Enthusiast Join Date: Oct 2007 Location: PA Posts: 2,037 iTrader: 0 reviews	very nice sir __________________

February 16th, 2008, 03:01 PM	#20
whitemustang02 MM's official Chevy guy 2002 Mustang V6 Join Date: Sep 2007 Location: Rochester, NY Posts: 2,024 iTrader: 0 reviews	shaved engin bay and hiden wires FTMFW __________________ "Speak softly and carry a big stick" - Theodore Roosevelt "Any idiot can make a V8 fast, it takes a real idiot to make a fast V6". '02 Mustang N/A 4.3 stroker away for winter '72 Chevelle project car 454 coming '93 Bronco EFI 351W DD

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Hose covers
Thread	Thread Starter	Forum	Replies	Last Post
Hose covers	soccerboy08	V6 Mustangs	17	January 25th, 2008 01:18 PM
What Hose Is This	Stang187	V6 Mustangs	18	November 12th, 2007 05:47 PM
hose	Iownastang	5.0 Mustangs	3	October 17th, 2007 09:10 PM
hose	dragpipe	General Tech	1	January 24th, 2007 07:58 PM
Return heater hose and inlet hose	mu5t4ng	96-98	32	January 4th, 2007 11:19 PM

All times are GMT -4. The time now is 04:58 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.