power steering fluid

stang300a · February 16th, 2008, 08:38 PM

i was looking in the owners manual and i am about to change my power steering fluid and it says it uses mercon automatic tranny fluid..... is that right?

itschristorres8 · February 16th, 2008, 08:41 PM

yupp

HMUSN · February 16th, 2008, 08:42 PM

stang300a · February 16th, 2008, 09:18 PM

alright cool thanks for the replies. i changed the fluid and wow it turns way easier. i didnt think i would notice a difference but i notice a big difference.

El_Cangri · February 17th, 2008, 02:28 PM

ahh i need to change mine...

could some1 tell me how to do it

Xantho99 · February 17th, 2008, 02:35 PM

Originally Posted by El_Cangri

ahh i need to change mine...

could some1 tell me how to do it

+1

stang300a · February 17th, 2008, 09:54 PM

i just used a turkey baster and sucked as much of the fluid out as i can and then filled it up and turned the car on and turned the wheel left to right like 10 times. i repeated this process like 4-5 times until it looked like new fluid in there.

HMUSN · February 17th, 2008, 09:56 PM

1. Remove hose and drain fluid.
2. Replace hose and top up the reservoir.
3. Start engine.
4. Slowly turn the wheels stop to stop, then back to straight ahead.
5. Stop engine
6. Repeat steps 1 through 5 as necessary, until the fluid you drain is clear.

SlideFox · February 17th, 2008, 11:12 PM

Sweet! That saves me one less thing to have the damn service center do!! I see a few hours on my next saturday morning being occupied already!!

El_Cangri · February 17th, 2008, 11:28 PM

doc wtf replace means lol?

like new hose or put it back?

itschristorres8 · February 18th, 2008, 12:00 AM

pull the return hose on your power sterring pump
if your going to grab a wrench to unthread the bolt its on to, then thats the wrong hose. its a plain rubber hose on the bottom

let it drain and all come out
replace hose
refill resivor
turn the car on. turn it a little bit each way, then turn the car off and check fluid.
then turn car on and turn all the way each way
turn off and check fluid and refil if needed
DO NOT OVERFILL

SlideFox · February 18th, 2008, 12:07 AM

You guys just saved me $65!!! Thanks!!

itschristorres8 · February 18th, 2008, 12:11 AM

Originally Posted by SlideFox

You guys just saved me $65!!! Thanks!!

its really about .5 of labor (30min)
maybe $6 in fluid? $10 being nice

SlideFox · February 18th, 2008, 09:30 AM

Originally Posted by itschristorres8

its really about .5 of labor (30min)
maybe $6 in fluid? $10 being nice

That's what I figured, but I was going off of what the service center told me. You know how they love to mark sh*t up!! Bought a $0.79 Turkey baster last night, and I'm gonna swing by Autozone afterwork to pick-up some PS fluid.

tjames · February 18th, 2008, 12:41 PM

so im supposed to use automatic tranny fluid for the power steering pump? really? why not power steering fluid?

ROUSHME661 · February 18th, 2008, 01:46 PM

Originally Posted by tjames

so im supposed to use automatic tranny fluid for the power steering pump? really? why not power steering fluid?

its whats reccomended by the factory but you can use power steering fluid

obdnanr · February 18th, 2008, 02:17 PM

its like how the manual says use automatic transmission fluid with my T5 transmission. That will confuse the fuck out of some old guys at an auto parts store.

tjames · February 18th, 2008, 02:25 PM

Originally Posted by obdnanr

its like how the manual says use automatic transmission fluid with my T5 transmission. That will confuse the fuck out of some old guys at an auto parts store.

ya i knew that. i used automatic tranny fluid in my t-5 the last time i changed it, but i didnt realize that you use it for the power steering pump also

SlideFox · February 18th, 2008, 08:31 PM

Just did the "Turkey Baster" flush! :-) definetly did the trick for around $10? How much fluid does the entire PS system hold?

HMUSN · February 18th, 2008, 08:36 PM

Originally Posted by El_Cangri

doc wtf replace means lol?

like new hose or put it back?

put it back... "replace" it to where where it was

February 16th, 2008, 08:38 PM	#1
stang300a Regular 2004 Mustang V6 Join Date: Jul 2007 Posts: 247 iTrader: 0 reviews	power steering fluid i was looking in the owners manual and i am about to change my power steering fluid and it says it uses mercon automatic tranny fluid..... is that right? __________________ 2004 Mustang 3.9L V6 with K&N intake, Dual Flowmaster Super 40s, Motoblue 42% Pulley, GT rear sway bar, drilled and slotted rotors, SCT tuner, Black FR500's 17 by 10.5 and 17 by 9, 4.10 motive gears and FRPP T-Lock.

February 16th, 2008, 08:41 PM	#2
itschristorres8 Banned 00 V6 & 09 GT 13.37@104.4mph--BONE stock GT Join Date: Aug 2006 Location: south florida Posts: 15,806 iTrader: 2 reviews	yupp __________________ [SIGPIC][/SIGPIC] Acmillr loves me

February 16th, 2008, 08:42 PM	#3
HMUSN Doc 1986 SVO 48.47@ 12.58 Join Date: Nov 2006 Posts: 37,050 iTrader: 11 reviews	__________________

February 16th, 2008, 09:18 PM	#4
stang300a Regular 2004 Mustang V6 Join Date: Jul 2007 Posts: 247 iTrader: 0 reviews	alright cool thanks for the replies. i changed the fluid and wow it turns way easier. i didnt think i would notice a difference but i notice a big difference. __________________ 2004 Mustang 3.9L V6 with K&N intake, Dual Flowmaster Super 40s, Motoblue 42% Pulley, GT rear sway bar, drilled and slotted rotors, SCT tuner, Black FR500's 17 by 10.5 and 17 by 9, 4.10 motive gears and FRPP T-Lock.

February 17th, 2008, 09:54 PM	#7
stang300a Regular 2004 Mustang V6 Join Date: Jul 2007 Posts: 247 iTrader: 0 reviews	i just used a turkey baster and sucked as much of the fluid out as i can and then filled it up and turned the car on and turned the wheel left to right like 10 times. i repeated this process like 4-5 times until it looked like new fluid in there. __________________ 2004 Mustang 3.9L V6 with K&N intake, Dual Flowmaster Super 40s, Motoblue 42% Pulley, GT rear sway bar, drilled and slotted rotors, SCT tuner, Black FR500's 17 by 10.5 and 17 by 9, 4.10 motive gears and FRPP T-Lock.

February 17th, 2008, 09:56 PM	#8
HMUSN Doc 1986 SVO 48.47@ 12.58 Join Date: Nov 2006 Posts: 37,050 iTrader: 11 reviews	1. Remove hose and drain fluid. 2. Replace hose and top up the reservoir. 3. Start engine. 4. Slowly turn the wheels stop to stop, then back to straight ahead. 5. Stop engine 6. Repeat steps 1 through 5 as necessary, until the fluid you drain is clear. __________________

February 17th, 2008, 11:12 PM	#9
SlideFox Regular 2000 Mustang V6 Join Date: Feb 2008 Location: Chandler, AZ Posts: 249 iTrader: 0 reviews	Sweet! That saves me one less thing to have the damn service center do!! I see a few hours on my next saturday morning being occupied already!! __________________ '00 Silver Mustang V6 Coupe 18x9 Black Bullitt Front Wheels 18x10 Black Bullitt Rear Wheels Nitto NT-555 Tires Steeda Short Shifter BBK Intake Mach 1 Chin Spoiler w/ Grill Delete Projector Headlights

February 18th, 2008, 12:00 AM	#11
itschristorres8 Banned 00 V6 & 09 GT 13.37@104.4mph--BONE stock GT Join Date: Aug 2006 Location: south florida Posts: 15,806 iTrader: 2 reviews	pull the return hose on your power sterring pump if your going to grab a wrench to unthread the bolt its on to, then thats the wrong hose. its a plain rubber hose on the bottom let it drain and all come out replace hose refill resivor turn the car on. turn it a little bit each way, then turn the car off and check fluid. then turn car on and turn all the way each way turn off and check fluid and refil if needed DO NOT OVERFILL __________________ [SIGPIC][/SIGPIC] Acmillr loves me

February 18th, 2008, 12:07 AM	#12
SlideFox Regular 2000 Mustang V6 Join Date: Feb 2008 Location: Chandler, AZ Posts: 249 iTrader: 0 reviews	You guys just saved me $65!!! Thanks!! __________________ '00 Silver Mustang V6 Coupe 18x9 Black Bullitt Front Wheels 18x10 Black Bullitt Rear Wheels Nitto NT-555 Tires Steeda Short Shifter BBK Intake Mach 1 Chin Spoiler w/ Grill Delete Projector Headlights

February 18th, 2008, 02:17 PM	#17
obdnanr Hardcore Enthusiast 2003 v6 340/373 - yay for belts Join Date: Nov 2007 Location: around Posts: 1,764 iTrader: 0 reviews	its like how the manual says use automatic transmission fluid with my T5 transmission. That will confuse the fuck out of some old guys at an auto parts store. __________________ 4.2L, gforce t5, 8.8, d1sc, other shit. stang is down

February 18th, 2008, 08:31 PM	#19
SlideFox Regular 2000 Mustang V6 Join Date: Feb 2008 Location: Chandler, AZ Posts: 249 iTrader: 0 reviews	Just did the "Turkey Baster" flush! :-) definetly did the trick for around $10? How much fluid does the entire PS system hold? __________________ '00 Silver Mustang V6 Coupe 18x9 Black Bullitt Front Wheels 18x10 Black Bullitt Rear Wheels Nitto NT-555 Tires Steeda Short Shifter BBK Intake Mach 1 Chin Spoiler w/ Grill Delete Projector Headlights

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: power steering fluid
Thread	Thread Starter	Forum	Replies	Last Post
power steering fluid	the68stangdude	Classic Mustangs	1	August 20th, 2007 06:02 PM
Decreasing power steering pump pressure for tighter steering	83 5.0	5.0 Mustangs	6	January 7th, 2007 08:24 PM
power steering	terribleonexx88	5.0 Mustangs	4	December 27th, 2006 07:50 PM
Power Steering??	RedHott66	V6 Mustangs	2	December 22nd, 2006 06:17 PM
Power Steering Fluid	itschristorres8	V6 Mustangs	1	November 1st, 2006 07:34 AM

All times are GMT -4. The time now is 04:59 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.