Steering rack....

		Forums at Modded Mustangs > Mustang Forums > V6 Mustangs
Steering rack....

Discussing Steering rack.... in the V6 Mustangs Forum. I just got through replacing both lower ball joints in the front and also replaced ...

Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free!

LinkBack

Thread Tools

February 17th, 2008, 01:23 AM	#1
lwhitetrash88l Regular 2004 Mustang Join Date: Mar 2007 Location: Florida Posts: 446	Steering rack.... I just got through replacing both lower ball joints in the front and also replaced the tie rod ends while I was there. However I noticed when replacing the tie rod ends that the one ?rod? on one side of the steering rack was really stiff and the other was loose. I kind of dont think this is normal but figured I would turn to you guys for some advice like always lol Also I took notice to there being a noise when I turn the wheel which sounds to be coming from the steering rack. Help?

February 17th, 2008, 02:58 AM

stephen

Enthusiast

Join Date: Feb 2007

Posts: 602

Originally Posted by lwhitetrash88l

I just got through replacing both lower ball joints in the front and also replaced the tie rod ends while I was there. However I noticed when replacing the tie rod ends that the one ?rod? on one side of the steering rack was really stiff and the other was loose. I kind of dont think this is normal but figured I would turn to you guys for some advice like always lol Also I took notice to there being a noise when I turn the wheel which sounds to be coming from the steering rack. Help?

There is an inner tie rod end at each end of the rack (inside the boot). They might need to be replaced, or you could get a rebuilt rack.

February 17th, 2008, 10:10 AM	#3
lwhitetrash88l Regular 2004 Mustang Join Date: Mar 2007 Location: Florida Posts: 446	how can i tell if i just need the inner end? or the whole assembly?

February 17th, 2008, 11:10 PM	#4
stephen Enthusiast Join Date: Feb 2007 Posts: 602	You might try pulling back the dust boots at the end of the steering rack and pull on the tie rod end. If you can see movement at the inner joint then there may be a problem. The Ford shop manual doesn't show much about the steering rack other than removing and replacing it and replacing the tie rods.

Thread Tools
Show Printable Version Email this Page

Threads Similar to: Steering rack....
Thread	Thread Starter	Forum	Replies	Last Post
F*%#ing Steering Rack......	Flomaster_Knockoff	5.0 Mustangs	10	March 3rd, 2008 07:56 PM
Steering rack blew up........	C MY 4D	99-04	11	January 5th, 2008 07:24 PM
need new steering rack bushings..	droppedbass87	96-98	1	August 4th, 2007 09:32 PM
Will steering rack fit 83 GLX from 86 GT?	83 5.0	5.0 Mustangs	0	October 14th, 2006 10:40 PM
Rack & Pinion Steering?	cliff	Classic Mustangs	7	October 7th, 2006 11:03 AM

All times are GMT -4. The time now is 05:13 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.