Brakeage

mustangjeff1997 · March 16th, 2008, 12:14 AM

It's time for new brakes because I think HMUSN jizzed on them or something, lol. I want to buy new rotors, calipers and pads, but I want to go high-performance since I would be going that route anyway. So, any suggestions? Cross-drilled preferred, and remember that I have 15" stocker wheels. Thanks!

itschristorres8 · March 16th, 2008, 12:21 AM

you have $400-600 to throw down on brakes

mustangjeff1997 · March 16th, 2008, 12:30 AM

yup...need them pretty soon, too, since they make a horrible rubbing noise on takeoff up to 35mph, and they are screamo brakes, lol.

tsp_2177 · March 16th, 2008, 12:33 AM

eBay Motors: Mustang Cobra 95 96 97 98 99 00 01 02 03 04 Rotors Pads (item 220210908952 end time Mar-16-08 19:00:00 PDT)
and try and find some 4 piston calipers?

tsp_2177 · March 16th, 2008, 12:34 AM

or wait you would have to have cobra calipers for those right?

tsp_2177 · March 16th, 2008, 12:34 AM

heres the rear
eBay Motors: 94 97 00 Ford Mustang Cobra Rear Brake Caliper Calipers (item 190161441484 end time Apr-06-08 13:53:01 PDT)

GreenFaleen · March 16th, 2008, 12:35 AM

braided break line, cross drilled rotors and 2 piston calipers from wilwood or baer(both make kits to fit under 15in rims), project mU break fluid you will never have trouble stopping to do all 4 breaks will run about 18-2500

tsp_2177 · March 16th, 2008, 12:35 AM

front possibly
don't know if these will work though
eBay Motors: Front Calipers Ford Mustang Cobra 94-98 61071/72 (item 360029295764 end time Apr-01-08 13:13:41 PDT)

tsp_2177 · March 16th, 2008, 12:36 AM

Originally Posted by GreenFaleen

braided break line, cross drilled rotors and 2 piston calipers from wilwood or baer(both make kits to fit under 15in rims), project mU break fluid you will never have trouble stopping to do all 4 breaks will run about 18-2500

will the stuff that i posted work?

GreenFaleen · March 16th, 2008, 12:41 AM

Originally Posted by tsp_2177

will the stuff that i posted work?

yeah the rotors are junk though, dont buy rotors of ebay they are rarely in balance and need to be ground normally, a cobra break conversion is nice but almost pointless without 17s since you still have the small rotors

mustangjeff1997 · March 16th, 2008, 12:56 AM

hmm...any other suggestions or would it be better to just fix what's needed until I get my 17" bullits?

tsp_2177 · March 16th, 2008, 01:01 AM

i say replace what you need get the cobra stuff and the bullits

GreenFaleen · March 16th, 2008, 01:05 AM

Originally Posted by mustangjeff1997

hmm...any other suggestions or would it be better to just fix what's needed until I get my 17" bullits?

my suggestion was pretty hard core, you can get a break upgrade kit from brembo for like 800

mustangjeff1997 · March 16th, 2008, 01:13 AM

Originally Posted by GreenFaleen

my suggestion was pretty hard core, you can get a break upgrade kit from brembo for like 800

may go that way. Got a link?

GreenFaleen · March 16th, 2008, 01:30 AM

Ford Racing Black Cobra Brake Upgrade Kit (Front and Rear)

thats the best i could find for your year, i know brembo had a set but its like 1500 now

stang300a · March 16th, 2008, 02:42 AM

i got these and i gotta say i love em. i have had them on my car for a bout 1.5 years and they kick ass. also i have slammed the brakes once hard as hell because i got in a car accident and the brakes still are on the car and no warping cracking or anything. good price too.

FORD MUSTANG 94-98 Front Drill Slot Brake Rotors + Pads: FDS1422 - 121.61041 - 104.06000 R1 Concepts Inc. - Discount Performance Brake Rotors

mustangjeff1997 · March 16th, 2008, 10:10 PM

while on the topic of brakes, is there any way to get an abs system for mine?

Lt_Crazy · March 16th, 2008, 10:48 PM

If u dont have any extreme power adders just get stock calipers and upgrade the rotors and pads!!! and u could get some SS brake lienes allthough i have no clue what those do.....

emgjsdk1 · March 16th, 2008, 11:49 PM

summitracing.com
has nice rotors drilled and slotted you can get them for cheap
calipers brothersperformance.com has decent prices and fast shipping just a f.y.i

mustangjeff1997 · March 16th, 2008, 11:50 PM

yea, that's what I'm looking at now. Found a good deal...

March 16th, 2008, 12:14 AM	#1
mustangjeff1997 Regular 2002 Subaru Impreza 2.5RS 9.63@5.4 Join Date: Dec 2007 Location: Under your bed Posts: 411	Brakeage It's time for new brakes because I think HMUSN jizzed on them or something, lol. I want to buy new rotors, calipers and pads, but I want to go high-performance since I would be going that route anyway. So, any suggestions? Cross-drilled preferred, and remember that I have 15" stocker wheels. Thanks! __________________ My Car: 2002 Subaru Impreza 2.5RS 5-spd, stock for now Family Plaything: 2003 Mach 1 5-spd, red/black, Flow's MM MACH 1 CREW #15 MM Subaru Club Founder Buy My...http://www.moddedmustangs.com/forums...v6-h-pipe.html

March 16th, 2008, 12:21 AM	#2
itschristorres8 I Post Entirely Way Too Much 2000 Mustang V6 n proud 13.1@107mph 2.1-60' Join Date: Aug 2006 Location: south florida Posts: 13,950	you have $400-600 to throw down on brakes __________________ 390rwhp V6 mustang stock bottom end

March 16th, 2008, 12:30 AM	#3
mustangjeff1997 Regular 2002 Subaru Impreza 2.5RS 9.63@5.4 Join Date: Dec 2007 Location: Under your bed Posts: 411	yup...need them pretty soon, too, since they make a horrible rubbing noise on takeoff up to 35mph, and they are screamo brakes, lol. __________________ My Car: 2002 Subaru Impreza 2.5RS 5-spd, stock for now Family Plaything: 2003 Mach 1 5-spd, red/black, Flow's MM MACH 1 CREW #15 MM Subaru Club Founder Buy My...http://www.moddedmustangs.com/forums...v6-h-pipe.html

March 16th, 2008, 12:33 AM	#4
tsp_2177 Hardcore Enthusiast 2005 Civic GAY! Join Date: Mar 2007 Location: Alabama Posts: 1,874	eBay Motors: Mustang Cobra 95 96 97 98 99 00 01 02 03 04 Rotors Pads (item 220210908952 end time Mar-16-08 19:00:00 PDT) and try and find some 4 piston calipers? __________________ slow car member twinky times two the stangs gone pypes mid muffler catback with their X-pipe In the top 20 cool peoples list on MM potsticker in training

March 16th, 2008, 12:34 AM	#5
tsp_2177 Hardcore Enthusiast 2005 Civic GAY! Join Date: Mar 2007 Location: Alabama Posts: 1,874	or wait you would have to have cobra calipers for those right? __________________ slow car member twinky times two the stangs gone pypes mid muffler catback with their X-pipe In the top 20 cool peoples list on MM potsticker in training

March 16th, 2008, 12:35 AM	#7
GreenFaleen Resident MM Ricer 2006 Scion tC 13.9@103/8.9@81 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 8,817	braided break line, cross drilled rotors and 2 piston calipers from wilwood or baer(both make kits to fit under 15in rims), project mU break fluid you will never have trouble stopping to do all 4 breaks will run about 18-2500 __________________ Buy My Guitar and Amp Scion Tc-strup racing header, CAI, Ground Kit, NOS 100shot tuning and install in process, Custom suspension, Doc. I 50% STS "Horsepower sells cars, torque wins races." -Carroll Shelby Thanks To My Sponsors: Strup Performance

March 16th, 2008, 12:56 AM	#11
mustangjeff1997 Regular 2002 Subaru Impreza 2.5RS 9.63@5.4 Join Date: Dec 2007 Location: Under your bed Posts: 411	hmm...any other suggestions or would it be better to just fix what's needed until I get my 17" bullits? __________________ My Car: 2002 Subaru Impreza 2.5RS 5-spd, stock for now Family Plaything: 2003 Mach 1 5-spd, red/black, Flow's MM MACH 1 CREW #15 MM Subaru Club Founder Buy My...http://www.moddedmustangs.com/forums...v6-h-pipe.html

March 16th, 2008, 01:01 AM	#12
tsp_2177 Hardcore Enthusiast 2005 Civic GAY! Join Date: Mar 2007 Location: Alabama Posts: 1,874	i say replace what you need get the cobra stuff and the bullits __________________ slow car member twinky times two the stangs gone pypes mid muffler catback with their X-pipe In the top 20 cool peoples list on MM potsticker in training

March 16th, 2008, 01:30 AM	#15
GreenFaleen Resident MM Ricer 2006 Scion tC 13.9@103/8.9@81 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 8,817	Ford Racing Black Cobra Brake Upgrade Kit (Front and Rear) thats the best i could find for your year, i know brembo had a set but its like 1500 now __________________ Buy My Guitar and Amp Scion Tc-strup racing header, CAI, Ground Kit, NOS 100shot tuning and install in process, Custom suspension, Doc. I 50% STS "Horsepower sells cars, torque wins races." -Carroll Shelby Thanks To My Sponsors: Strup Performance

March 16th, 2008, 02:42 AM	#16
stang300a Regular 2004 Mustang V6 Join Date: Jul 2007 Posts: 230	i got these and i gotta say i love em. i have had them on my car for a bout 1.5 years and they kick ass. also i have slammed the brakes once hard as hell because i got in a car accident and the brakes still are on the car and no warping cracking or anything. good price too. FORD MUSTANG 94-98 Front Drill Slot Brake Rotors + Pads: FDS1422 - 121.61041 - 104.06000 R1 Concepts Inc. - Discount Performance Brake Rotors __________________ 2004 Mustang 3.9L V6 with K&N intake, Dual Flowmaster Super 40s, Motoblue 42% Pulley, GT rear sway bar, drilled and slotted rotors, SCT tuner, Black FR500's 17 by 10.5 and 17 by 9, 4.10 motive gears and FRPP T-Lock.

March 16th, 2008, 10:10 PM	#17
mustangjeff1997 Regular 2002 Subaru Impreza 2.5RS 9.63@5.4 Join Date: Dec 2007 Location: Under your bed Posts: 411	while on the topic of brakes, is there any way to get an abs system for mine? __________________ My Car: 2002 Subaru Impreza 2.5RS 5-spd, stock for now Family Plaything: 2003 Mach 1 5-spd, red/black, Flow's MM MACH 1 CREW #15 MM Subaru Club Founder Buy My...http://www.moddedmustangs.com/forums...v6-h-pipe.html

March 16th, 2008, 10:48 PM	#18
Lt_Crazy Regular Join Date: Dec 2006 Location: Montreal, Canada Posts: 478	If u dont have any extreme power adders just get stock calipers and upgrade the rotors and pads!!! and u could get some SS brake lienes allthough i have no clue what those do..... __________________ The difference between Fiction and Reality??? Fiction has to make sense. -Tom Clancy

March 16th, 2008, 11:49 PM	#19
emgjsdk1 Banned 2002 gt vert ? Join Date: Aug 2007 Location: SVA Posts: 809	summitracing.com has nice rotors drilled and slotted you can get them for cheap calipers brothersperformance.com has decent prices and fast shipping just a f.y.i

March 16th, 2008, 11:50 PM	#20
mustangjeff1997 Regular 2002 Subaru Impreza 2.5RS 9.63@5.4 Join Date: Dec 2007 Location: Under your bed Posts: 411	yea, that's what I'm looking at now. Found a good deal... __________________ My Car: 2002 Subaru Impreza 2.5RS 5-spd, stock for now Family Plaything: 2003 Mach 1 5-spd, red/black, Flow's MM MACH 1 CREW #15 MM Subaru Club Founder Buy My...http://www.moddedmustangs.com/forums...v6-h-pipe.html

All times are GMT -4. The time now is 10:37 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.