looking for a lil help

greenstang97 · March 16th, 2008, 03:59 PM

so i here you can put a supercharger on a 3.8 mustang off a tbird. if so what all am i going to need and how much work is it going to be. if any one know anyone who has done it or knows what i have to do can you pleas let me know thanks

emgjsdk1 · March 16th, 2008, 04:21 PM

its possible
look on ebay type in "eaton m80 supercharger"- i believe its called
BUT
for that kinda money you could do full bolt-ons i.e. split port swap, ported and polished upper and lower intakes, exhaust of your choice and probably a few other things depending on your budget, or you could just go find the thread about the eaton m112 setup this guys is doing that would result in the most power gains

98mustang · March 16th, 2008, 04:28 PM

It's the Eaton M90 and yeah lots of guys have done it, its alot of parts and some fabrication but if you have a doner car it is alot easier. Go for it man, its alot cheaper than converting it to split port then doing th M112 and u can use the same hood!! I like it for a early SN-95!!!

SSStang · March 16th, 2008, 04:28 PM

M80!

Lol, is that a firework?

Its Eaton M90.

98mustang · March 16th, 2008, 04:32 PM

Originally Posted by SSStang

M80!

Lol, is that a firework?

Its Eaton M90.

Yeah it is!!!

HMUSN · March 16th, 2008, 04:36 PM

Turbo charge it.

greenstang97 · March 16th, 2008, 04:45 PM

i have the supercharger and the lower intake heads and the computer. all ready i just need to find out what els i will need.do any of you guy know any one who had done it personally that i could talk to.

HMUSN · March 16th, 2008, 04:46 PM

fuel acc's and a tune would help you out.

Avaric3 · March 16th, 2008, 06:16 PM

if i were you, i wouldve just pulled the whole motor froma supercoupe

emgjsdk1 · March 17th, 2008, 01:50 PM

Originally Posted by SSStang

M80!

Lol, is that a firework?

Its Eaton M90.

whoops

Onemanzu · March 17th, 2008, 01:51 PM

m90 on a 99 to 04 mustang is a waste of time and money... stay with the split port and put a good super charger on it ... m112 or a centri

forgot the green...

98mustang · March 17th, 2008, 01:59 PM

He is not 99-04. Hints the name greenstang97.

greenstang97 · March 17th, 2008, 07:02 PM

yeah i have a 1997 mustang. so is it going to be a lot of work or not so much

greenstang97 · March 17th, 2008, 07:08 PM

yea i have a 97 mustang. so is it going to be a lot of work or not really. cuz i have the heads lower intake and supercharger.

99v6stang · March 17th, 2008, 07:41 PM

yes it will be a good deal of work. You also will need a bunch more stuff.... Fuel Pump, bigger injectors, dyno tune, gaskets..... I would think if you go into it knowing what your doing you could pull it off in a weekend, but if you havent at least taken heads and intakes off your car before i would not reccomend it. To be honest with you, if are asking if its going to be alot of work or not, then you probally have no idea what you are in for and should do some more research

greenstang97 · March 17th, 2008, 10:16 PM

i have done motor work befor i am just seeing if any one has done it and how much work cuz i was going to get a bolt on kit but my buddy had this tbird at his house. so i was just look to see if any one els has done it

Trent-04v6 · March 18th, 2008, 04:21 AM

Originally Posted by HMUSN

Turbo charge it.

then nitrous it

Originally Posted by greenstang97

i have done motor work befor i am just seeing if any one has done it and how much work cuz i was going to get a bolt on kit but my buddy had this tbird at his house. so i was just look to see if any one els has done it

Search it on the forumn.. alot of people have gone into IN DEPTH discussions about what you need and what not.. no need to go over it a million times.

March 16th, 2008, 03:59 PM	#1
greenstang97 Newbie 1997 ford mustang unknow Join Date: Mar 2008 Location: michigan Posts: 10	looking for a lil help so i here you can put a supercharger on a 3.8 mustang off a tbird. if so what all am i going to need and how much work is it going to be. if any one know anyone who has done it or knows what i have to do can you pleas let me know thanks

March 16th, 2008, 04:28 PM	#4
SSStang I Post Entirely Way Too Much 2k2 Mustang V6 Join Date: Feb 2007 Location: TEXAS Posts: 5,913	M80! Lol, is that a firework? Its Eaton M90. __________________

March 17th, 2008, 07:41 PM	#15
99v6stang Enthusiast Join Date: Dec 2006 Posts: 686	yes it will be a good deal of work. You also will need a bunch more stuff.... Fuel Pump, bigger injectors, dyno tune, gaskets..... I would think if you go into it knowing what your doing you could pull it off in a weekend, but if you havent at least taken heads and intakes off your car before i would not reccomend it. To be honest with you, if are asking if its going to be alot of work or not, then you probally have no idea what you are in for and should do some more research __________________ Interested in a porting and polishing job??? Heads, intakes, throttle bodies, halfshafting..... Great prices, take a look. http://www.freewebs.com/harrisonporting/ My car ---- (m112 in progress)

March 16th, 2008, 04:21 PM	#2
emgjsdk1 Banned 2002 gt vert ? Join Date: Aug 2007 Location: SVA Posts: 809	its possible look on ebay type in "eaton m80 supercharger"- i believe its called BUT for that kinda money you could do full bolt-ons i.e. split port swap, ported and polished upper and lower intakes, exhaust of your choice and probably a few other things depending on your budget, or you could just go find the thread about the eaton m112 setup this guys is doing that would result in the most power gains

March 16th, 2008, 04:28 PM	#3
98mustang Regular 1998 Mustang 3.8L Join Date: Aug 2005 Location: Statesboro/Augusta GA. Posts: 229	It's the Eaton M90 and yeah lots of guys have done it, its alot of parts and some fabrication but if you have a doner car it is alot easier. Go for it man, its alot cheaper than converting it to split port then doing th M112 and u can use the same hood!! I like it for a early SN-95!!!

March 16th, 2008, 04:45 PM	#7
greenstang97 Newbie 1997 ford mustang unknow Join Date: Mar 2008 Location: michigan Posts: 10	i have the supercharger and the lower intake heads and the computer. all ready i just need to find out what els i will need.do any of you guy know any one who had done it personally that i could talk to.

March 17th, 2008, 01:59 PM	#12
98mustang Regular 1998 Mustang 3.8L Join Date: Aug 2005 Location: Statesboro/Augusta GA. Posts: 229	He is not 99-04. Hints the name greenstang97.

March 17th, 2008, 07:02 PM	#13
greenstang97 Newbie 1997 ford mustang unknow Join Date: Mar 2008 Location: michigan Posts: 10	yeah i have a 1997 mustang. so is it going to be a lot of work or not so much

March 17th, 2008, 07:08 PM	#14
greenstang97 Newbie 1997 ford mustang unknow Join Date: Mar 2008 Location: michigan Posts: 10	yea i have a 97 mustang. so is it going to be a lot of work or not really. cuz i have the heads lower intake and supercharger.

March 17th, 2008, 10:16 PM	#16
greenstang97 Newbie 1997 ford mustang unknow Join Date: Mar 2008 Location: michigan Posts: 10	i have done motor work befor i am just seeing if any one has done it and how much work cuz i was going to get a bolt on kit but my buddy had this tbird at his house. so i was just look to see if any one els has done it

All times are GMT -4. The time now is 02:28 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.