Aluminum Flyhweel problem

obdnanr · March 17th, 2008, 12:13 PM

Okay so i bought an spec aluminum fly wheel and had it sent to the dudes balancing my crank or what ever. I called G-force today and they told me it should be done by the end of the week. So im like sweet dude. Then i asked him so what sline is the input shaft, he replys, 26 spline. Then i go into asking about clutches yatta yatta yatta.

Will a gt clutch fit my V6 aluminum fly wheel?? Or am i going to have to get a v6 clutch? *NOT SPEC* So theirs RAM and uhh spec ?? does center force make them for v6's?

sorry my google is a little slow

itschristorres8 · March 17th, 2008, 12:57 PM

a GT clutch WILL WORK as long as its 26spline! thats VERY important
i believe they have 10spline stock
but the flywheel you got has the mounting holes for a GT clutch setup
if you'd like you can send me the clutch or we talk on aim and i'll attatch with your flywheel

this way when you get the motor its take out motor
drop in motor just slide in the tranny and bolt it in

March 17th, 2008, 12:13 PM	#1
obdnanr Enthusiast 2003 v6 340/373 - yay for belts Join Date: Nov 2007 Location: around Posts: 740	Aluminum Flyhweel problem Okay so i bought an spec aluminum fly wheel and had it sent to the dudes balancing my crank or what ever. I called G-force today and they told me it should be done by the end of the week. So im like sweet dude. Then i asked him so what sline is the input shaft, he replys, 26 spline. Then i go into asking about clutches yatta yatta yatta. Will a gt clutch fit my V6 aluminum fly wheel?? Or am i going to have to get a v6 clutch? NOT SPEC So theirs RAM and uhh spec ?? does center force make them for v6's? sorry my google is a little slow __________________ 4.2L, gforce t5, 8.8, d1sc, other shit. stang is down Last edited by obdnanr : March 17th, 2008 at 12:15 PM.

March 17th, 2008, 12:57 PM	#2
itschristorres8 I Post Entirely Way Too Much 2000 Mustang V6 n proud 13.1@107mph 2.1-60' Join Date: Aug 2006 Location: south florida Posts: 13,907	a GT clutch WILL WORK as long as its 26spline! thats VERY important i believe they have 10spline stock but the flywheel you got has the mounting holes for a GT clutch setup if you'd like you can send me the clutch or we talk on aim and i'll attatch with your flywheel this way when you get the motor its take out motor drop in motor just slide in the tranny and bolt it in __________________ 390rwhp V6 mustang stock bottom end

Threads Similar to: Aluminum Flyhweel problem
Thread	Thread Starter	Forum	Replies	Last Post
aluminum Driveshaft	itschristorres8	Parts	23	August 25th, 2008 06:58 PM
Aluminum 4.6	autogt4.6	Engine	4	December 27th, 2007 12:05 PM
Aluminum 4.6	autogt4.6	99-04	4	December 25th, 2007 06:10 PM
Aluminum DS	07stanggt	2005+	7	December 11th, 2007 07:36 PM
Aluminum D/S	Racinjason81	V6 Mustangs	5	April 4th, 2007 11:12 AM

All times are GMT -4. The time now is 02:32 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.