[riddlee josh]

ight well i am starting to get into the expensive parts for my car now that i have most of the cheap bolt ons. but just wondering are there any other bolton's i can get? what do you have when you are considered to have full bolton's? i plan on doing a split port swap over the summer but if there are any more bolt on's i can get i would like to know what they are? i would also like to get nitrouse soon.

[whitemustang02]

Things that I don’t see in your sig

Gears and t-lock
Aluminum drive shaft
Shift kit/ j-mod or short throw shifter ( depending if you are stick or auto)
Aluminum fly wheel or tq converter (again depending on tranny type)
Upgraded coil pack
A tune (may want to wait till after the split port swap)

Some suspension stuff
Upper control arms
Lower control arms
Springs
Sub frame connecters

Weight reduction
Rear seat delete
Relocate the battery
a/c delete

for better track times slicks and skinies

[riddlee josh]

do the crown vics that the cops use have aluminum drive shafts in them and would they fit my car?

and im going to do a rear seat delete when school lets out. and would like to get slicks when i start going to the track.

[whitemustang02]

Originally Posted by riddlee josh do the crown vics that the cops use have aluminum drive shafts in them and would they fit my car? and im going to do a rear seat delete when scholl lets out. and would like to get slicks when i start going to the track.

you would haveto ask juggs i dk if they all have it of just a few and i also am not pisitive they will fit your car i think the will but im not 100%

[riddlee josh]

i thought i heard that they would but i figured i would ask on here before i went and got one

[GreenFaleen]

all police package Fords have the aluminum drive shaft, not sure if it will fit though, and I would do some steeda drag springs and slicks that will really help you hook, especially when you put spray in

[whitemustang02]

another thing i just thought of is when you get your split port spend the little extra $ and get some P&P work also since you alredy have a nice cowl hood get a windstar upper and you will see some nice gains.
that will your other bolt-ons and a nice tune should put you in the 200rwhp range

[moond0ggie]

Roller Rockers might help 1.73:1 or 1.8:1

[whitemustang02]

Originally Posted by moond0ggie Roller Rockers might help 1.73:1 or 1.8:1

1.8 suck
and the 1.7's won't do much with out a cam

[obdnanr]

bolt on a supercharger!!!

[Trent-04v6]

I guess RR's are bolt-ons now

You're pretty much there.. I wouldn't say a drive shaft is a bolt-on, but it might help.. a tiny bit.

Gears and T-lok aren't much of a bolt-on but, that would be my next choice.. but if your gonna try to go big just skip to a 8.8

[Trent-04v6]

Originally Posted by obdnanr bolt on a supercharger!!!

+1 that's more of a bolt-on than anything else said here, and it will show you big gains =]

[obdnanr]

uhh my super charger was a total bolt on(just took me 3 days because i didnt know wtf i was doing), besides cutting a piece off my radiator fan. I think the aluminum drive shaft is a good mod though. Sorta, takes some getting used to because you have to shift WAAY sooner

[CNASHGO]

wouldn't a tb be a bolt on also. not a huge gain in power from it but still some.

[GreenFaleen]

Originally Posted by CNASHGO wouldn't a tb be a bolt on also. not a huge gain in power from it but still some.

not unless you port your intakes to match, just Port and polish and half shaft the stock one

[Trent-04v6]

Originally Posted by obdnanr uhh my super charger was a total bolt on(just took me 3 days because i didnt know wtf i was doing), besides cutting a piece off my radiator fan. I think the aluminum drive shaft is a good mod though. Sorta, takes some getting used to because you have to shift WAAY sooner

Your intercooler is the hard part =[ still IDK about the drive shaft.. it will give you maybe like a .02 in a 1/4 lol I mean correct me if I am wrong.

[CNASHGO]

Originally Posted by GreenFaleen not unless you port your intakes to match, just Port and polish and half shaft the stock one

how large can you p&p the stock one. just wondering since you can buy up 70 mm


/sorry for thread jacking

[GreenFaleen]

Originally Posted by Trent-04v6 Your intercooler is the hard part =[ still IDK about the drive shaft.. it will give you maybe like a .02 in a 1/4 lol I mean correct me if I am wrong.

its a lot faster accelerating combined with gears you can see over a second off your time

Originally Posted by CNASHGO how large can you p&p the stock one. just wondering since you can buy up 70 mm /sorry for thread jacking

you can port to match your intakes, that about as big as you wanna go, if you get a 70mm TB you wanna port your intakes to a 70mm opening so they can allow all the air in

[whitemustang02]

Originally Posted by Trent-04v6 I guess RR's are bolt-ons now You're pretty much there.. I wouldn't say a drive shaft is a bolt-on, but it might help.. a tiny bit. Gears and T-lok aren't much of a bolt-on but, that would be my next choice.. but if your gonna try to go big just skip to a 8.8

imo a bolt on is any fairly simple mod that doesn't require you to start tarring in to your engine. not something that latterly means you can just bolt it on because then RR would count and so would heads, intake, ect.

the only thins that are maybe above the meads of most people are the gears and t-lock and the a/c delete

[GreenFaleen]

Originally Posted by whitemustang02 imo a bolt on is any fairly simple mod that doesn't require you to start tarring in to your engine. not something that latterly means you can just bolt it on because then RR would count and so would heads, intake, ect. the only thins that are maybe above the meads of most people are the gears and t-lock and the a/c delete

a/c delete isnt hard at all