Any one have VVME HID's on their car?

jim.munoz · March 23rd, 2008, 01:10 AM

my high beams and low beams are switched. the kit is plug and play so i know the cables are not switched. which cables should i switch to correct this?

scubasteve041186 · March 23rd, 2008, 01:13 AM

should be a three pronger attachment. in the instructions it should tell you which one is the high and which is the low.. if not usually black is ground... or find the ground wire... and from there switch the other two

scubasteve041186 · March 31st, 2008, 03:17 AM

any luck?

jim.munoz · March 31st, 2008, 10:01 AM

yeah i found a thread on a gto forum that had a guide to fix it.

zolen · March 31st, 2008, 10:14 AM

same thing happened to me while installing my friend's HID kit. Those kits are made to plug into the passenger side headlight harness, but because the battery is on the driver's side on our cars we have to plug it into the driver's side headlight harness since the wiring wont reach. Because of that, the wiring is backwards, you juist have to switch the wires around.

March 23rd, 2008, 01:10 AM	#1
jim.munoz Regular Join Date: Jun 2007 Location: Bay Area,CA Posts: 75	Any one have VVME HID's on their car? my high beams and low beams are switched. the kit is plug and play so i know the cables are not switched. which cables should i switch to correct this?

Threads Similar to: Any one have VVME HID's on their car?
Thread	Thread Starter	Forum	Replies	Last Post
HID's Where should I get them?	energiesource	99-04	6	May 31st, 2008 03:36 PM
Ebay: FlashPlus/VVME	Zatrekaz	Member Buy / Sell Feedback	5	April 28th, 2008 06:20 AM
Just installed some HID's.	breakout831	Pictures	18	March 24th, 2008 08:18 PM
HID's anyone?	InSaYnE	V6 Mustangs	33	January 27th, 2008 12:23 AM
HID's	96GT_Driver	96-98	3	February 28th, 2007 04:46 PM

March 23rd, 2008, 01:13 AM	#2
scubasteve041186 Hardcore Enthusiast 2004 mustang 40th annv. Join Date: Sep 2006 Location: kelowna,BC, Canada Posts: 1,286	should be a three pronger attachment. in the instructions it should tell you which one is the high and which is the low.. if not usually black is ground... or find the ground wire... and from there switch the other two

March 31st, 2008, 03:17 AM	#3
scubasteve041186 Hardcore Enthusiast 2004 mustang 40th annv. Join Date: Sep 2006 Location: kelowna,BC, Canada Posts: 1,286	any luck?

March 31st, 2008, 10:01 AM	#4
jim.munoz Regular Join Date: Jun 2007 Location: Bay Area,CA Posts: 75	yeah i found a thread on a gto forum that had a guide to fix it.

March 31st, 2008, 10:14 AM	#5
zolen Newbie 2003 Cobra 12.3@ 113 Join Date: Mar 2008 Location: Bham AL Posts: 37	same thing happened to me while installing my friend's HID kit. Those kits are made to plug into the passenger side headlight harness, but because the battery is on the driver's side on our cars we have to plug it into the driver's side headlight harness since the wiring wont reach. Because of that, the wiring is backwards, you juist have to switch the wires around.

All times are GMT -4. The time now is 02:52 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.