Cai Maf

BDaily · March 23rd, 2008, 08:31 PM

eBay Motors: 1994 - 2002 3.8L V6 Mustang UPR cold air intake-- NEW!! (item 180225852565 end time Mar-27-08 15:28:34 PDT)

if i were to get this what would i have to get also for the mass airflow sensor?

Thanks,

Bryan

HMUSN · March 23rd, 2008, 08:33 PM

nothing. use your stock one

BDaily · March 23rd, 2008, 08:36 PM

not to be a pain in the a$$ or anything lol but how would i do that?

HMUSN · March 23rd, 2008, 08:38 PM

http://www.lasotaracing.com/Graphics.../maf-setup.gif

no biggie dude

just unbolt it from your stock intake and bolt it to the cai

BDaily · March 23rd, 2008, 08:40 PM

ok thanks man and thanks for the quick response

HMUSN · March 23rd, 2008, 08:40 PM

anytime man

emgjsdk1 · March 23rd, 2008, 08:41 PM

take your stock intake apart
you need to open up the box where your airfilter sits
pull that big ass tube out from you fender well
take the tubing off from the manifold
just look inside the tubing for bolts and what not
i had to put a intake on my gfs 94 v6 i think their the same thing as yours

RavensChild · March 23rd, 2008, 09:37 PM

Originally Posted by emgjsdk1

take your stock intake apart
you need to open up the box where your airfilter sits
pull that big ass tube out from you fender well
take the tubing off from the manifold
just look inside the tubing for bolts and what not
i had to put a intake on my gfs 94 v6 i think their the same thing as yours

no one told me that when i tried to hook mine up. I was starring at that thing for an hour and called a friends dad who told me to take the son of a bitch apart to get the MAF

emgjsdk1 · March 23rd, 2008, 11:45 PM

Originally Posted by RavensChild

no one told me that when i tried to hook mine up. I was starring at that thing for an hour and called a friends dad who told me to take the son of a bitch apart to get the MAF

lol
i got a 2002 and my cai came on the car when i bought it
but i did my gfs 94 and figured it out pretty quick
the thing that took the most time was auctally the maf

justinsstang · March 24th, 2008, 09:59 AM

i ended up yanking my MAF off, i didn't unbolt it from inside.. lol. it was a job too it sucked=[

nice to know u can unbolt it from inside for easier uninstall... now that its too late! thx guys jk <3

Onemanzu · March 24th, 2008, 03:51 PM

come to lincoln and i can swap it for you... i say thats worth the $20 in gas to get here

go ahead and try to get that one, if it goes above $50 + shipping bail on it

emgjsdk1 · March 24th, 2008, 04:05 PM

i think you will need new couplers to connect to the intake manifold because you have a single port when i fabbed my old cai for my 02 to my gfs 94 i had to grind a chunk out of the piping a needed a new coupler im not sure wtf that ebay guy is trying to do but it wont be a direct fit with the years hes specified id look for another

emgjsdk1 · March 24th, 2008, 04:06 PM

and hes obviously stupid because he supposedly paid 150$ for an off brand cai
i would avoid this one to be honest...

Onemanzu · March 24th, 2008, 04:17 PM

its a metal pipe...

and its designed for the single ports for the looks of it

March 23rd, 2008, 08:31 PM	#1
BDaily Enthusiast 1999 Mustang GT TOO SLOW AT HURRY UP Join Date: Dec 2007 Location: Elkhorn (Omaha) Nebraska Posts: 653 iTrader: 0 reviews	Cai Maf eBay Motors: 1994 - 2002 3.8L V6 Mustang UPR cold air intake-- NEW!! (item 180225852565 end time Mar-27-08 15:28:34 PDT) if i were to get this what would i have to get also for the mass airflow sensor? Thanks, Bryan __________________ 1999 Coupe 4.6L Flowmaster catback BBK underdrive Pulleys Steeda Tri-ax Shifter Lowered w/ steeda bumpsteer kit 3.73 Gears Cold air intake Throttle body spacer Profesional Products Plenum BBK 70mm Throttlebody BBK Longtubes and H pipe

March 23rd, 2008, 08:33 PM	#2
HMUSN Doc 1986 SVO 48.47@ 12.58 Join Date: Nov 2006 Posts: 37,050 iTrader: 11 reviews	nothing. use your stock one __________________

March 23rd, 2008, 08:36 PM	#3
BDaily Enthusiast 1999 Mustang GT TOO SLOW AT HURRY UP Join Date: Dec 2007 Location: Elkhorn (Omaha) Nebraska Posts: 653 iTrader: 0 reviews	not to be a pain in the a$$ or anything lol but how would i do that? __________________ 1999 Coupe 4.6L Flowmaster catback BBK underdrive Pulleys Steeda Tri-ax Shifter Lowered w/ steeda bumpsteer kit 3.73 Gears Cold air intake Throttle body spacer Profesional Products Plenum BBK 70mm Throttlebody BBK Longtubes and H pipe

March 23rd, 2008, 08:38 PM	#4
HMUSN Doc 1986 SVO 48.47@ 12.58 Join Date: Nov 2006 Posts: 37,050 iTrader: 11 reviews	http://www.lasotaracing.com/Graphics.../maf-setup.gif no biggie dude just unbolt it from your stock intake and bolt it to the cai __________________

March 23rd, 2008, 08:40 PM	#5
BDaily Enthusiast 1999 Mustang GT TOO SLOW AT HURRY UP Join Date: Dec 2007 Location: Elkhorn (Omaha) Nebraska Posts: 653 iTrader: 0 reviews	ok thanks man and thanks for the quick response __________________ 1999 Coupe 4.6L Flowmaster catback BBK underdrive Pulleys Steeda Tri-ax Shifter Lowered w/ steeda bumpsteer kit 3.73 Gears Cold air intake Throttle body spacer Profesional Products Plenum BBK 70mm Throttlebody BBK Longtubes and H pipe

March 23rd, 2008, 08:40 PM	#6
HMUSN Doc 1986 SVO 48.47@ 12.58 Join Date: Nov 2006 Posts: 37,050 iTrader: 11 reviews	anytime man __________________

March 23rd, 2008, 08:41 PM	#7
emgjsdk1 Banned 2002 gt vert ? Join Date: Aug 2007 Location: SVA Posts: 808 iTrader: 0 reviews	take your stock intake apart you need to open up the box where your airfilter sits pull that big ass tube out from you fender well take the tubing off from the manifold just look inside the tubing for bolts and what not i had to put a intake on my gfs 94 v6 i think their the same thing as yours __________________ 2002 mustang gt vert. 18' bullitts k&n drop in air filter flowmaster mufflers soon to have mac off road x pipe and steeda udp pullies

March 24th, 2008, 09:59 AM	#10
justinsstang Enthusiast 1998 Mustang v6 Join Date: Feb 2007 Location: Poplar Bluff, Missouri Posts: 862 iTrader: 0 reviews	i ended up yanking my MAF off, i didn't unbolt it from inside.. lol. it was a job too it sucked=[ nice to know u can unbolt it from inside for easier uninstall... now that its too late! thx guys jk <3 __________________ Red '98 Mustang. Custom Dual Exhaust w/ fabbed X pipe. CAI. 17in Black Rims w/ Aluminum Lip. Alpine Head Unit and Type-S speakers in doors and decklid. 600w Bridged BOSS amp to two 12" Audio Bahn Blue Flame Series Subs.

March 24th, 2008, 03:51 PM	#11
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	come to lincoln and i can swap it for you... i say thats worth the $20 in gas to get here go ahead and try to get that one, if it goes above $50 + shipping bail on it __________________ My Foz

March 24th, 2008, 04:05 PM	#12
emgjsdk1 Banned 2002 gt vert ? Join Date: Aug 2007 Location: SVA Posts: 808 iTrader: 0 reviews	i think you will need new couplers to connect to the intake manifold because you have a single port when i fabbed my old cai for my 02 to my gfs 94 i had to grind a chunk out of the piping a needed a new coupler im not sure wtf that ebay guy is trying to do but it wont be a direct fit with the years hes specified id look for another __________________ 2002 mustang gt vert. 18' bullitts k&n drop in air filter flowmaster mufflers soon to have mac off road x pipe and steeda udp pullies

March 24th, 2008, 04:06 PM	#13
emgjsdk1 Banned 2002 gt vert ? Join Date: Aug 2007 Location: SVA Posts: 808 iTrader: 0 reviews	and hes obviously stupid because he supposedly paid 150$ for an off brand cai i would avoid this one to be honest... __________________ 2002 mustang gt vert. 18' bullitts k&n drop in air filter flowmaster mufflers soon to have mac off road x pipe and steeda udp pullies

March 24th, 2008, 04:17 PM	#14
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	its a metal pipe... and its designed for the single ports for the looks of it __________________ My Foz

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 08:17 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.