[tigerfan2771]

im getting ready to do a complete h/c/i swap and am trying to find a cam that will be quiet but will compliment my big valve heads and ported intakes. ive found this one used and it seems to be close to what im looking for:

RPM-Mustangs 210/214 .548 cam. also only on the car for about 2 months
i have brand new valve springs with this (1 of the originals snapped and so i upgraded to better springs)
and i also have the pushrods to work with these
$250+shipping OBO
*ON THE CAM, IT IS A REGRIND SO YOU WILL NEED TO PUT THE SPACER ON (FROM YOUR STOCK CAM)*
everything is off the car, but still at the shop where im doing the work. ill have pictures asap. with this setup+full bolt ons i made 227rwhp/227rwtq

so let me know whether you guys think that this will be enough to take advantage of the big valve cylinder heads or not.

[GreenFaleen]

thats a bit high for a used cam. Im not a fan of using used internals. Im pretty sure chris could get you a new regrind for close to that

[tigerfan2771]

Originally Posted by GreenFaleen thats a bit high for a used cam. Im not a fan of using used internals. Im pretty sure chris could get you a new regrind for close to that

well it includes the really good beehive spring which cost $150 anyway. chris said it was a good deal as well. i could probably talk him down to $200 though.

[GreenFaleen]

oh I thought that was for just the cam, yeah I would grab it, just make sure its all good before you put it on your car

[tigerfan2771]

Originally Posted by GreenFaleen oh I thought that was for just the cam, yeah I would grab it, just make sure its all good before you put it on your car

yeah. there shouldnt be any problems. i want to do the hardened pushrods but how do i go about measuring for them without taking apart my engine?

[itschristorres8]

Originally Posted by tigerfan2771 yeah. there shouldnt be any problems. i want to do the hardened pushrods but how do i go about measuring for them without taking apart my engine?

you want to measure the ones in your block?
if thats what you were trying to say before sorry i was confused a little. all are the same size from 04 and older v6s

[GreenFaleen]

He said he has pushrods just ask him what size they are

[tigerfan2771]

ok well i want the hardened pushrods, but i want to get the right ones for the cam. how do i know what size to get for the cam im getting?

[GreenFaleen]

the guy saleing the cam said he had rods for it ask him the size and order them with that

[itschristorres8]

Originally Posted by tigerfan2771 ok well i want the hardened pushrods, but i want to get the right ones for the cam. how do i know what size to get for the cam im getting?

the harden push rods are slightly longer. i went out side just now and took a pic
i'll post in a few

[tigerfan2771]

ok but what would i need to do in order to get the right hardened pushrods from you? could i send you the cam? or do you need something else?

[itschristorres8]

Originally Posted by tigerfan2771 ok but what would i need to do in order to get the right hardened pushrods from you? could i send you the cam? or do you need something else?

theres only 1 set of harden push rods which are slightly longer
they will work though

[tigerfan2771]

Originally Posted by itschristorres8 theres only 1 set of harden push rods which are slightly longer they will work though

alright so i dont have to go and measure anything then?

[itschristorres8]

Originally Posted by tigerfan2771 alright so i dont have to go and measure anything then?

nope not at all

[tigerfan2771]

Originally Posted by itschristorres8 nope not at all

alright sounds good then. did you ever get the prices on the roller rockers? and would it be alright for me to ship the cam and springs to you together so that you can install the springs and look over the cam for me? i can pay you for the additional shipping back to me.

[itschristorres8]

Originally Posted by tigerfan2771 alright sounds good then. did you ever get the prices on the roller rockers? and would it be alright for me to ship the cam and springs to you together so that you can install the springs and look over the cam for me? i can pay you for the additional shipping back to me.

yupp you sure can. when you send the camshaft make sure to use bubble wrap around it and pack the box good, if the lobes get damaged that'd be a bummer