CRT Performance is looking to sponsor

itschristorres8 · May 6th, 2008, 09:09 PM

you send me a PM
my sponsor ship is not like any other sponsor ship

people are thinking i want them to run a huge sticker on the windshield

not at all
my car is completely ANTI-STICKER i wouldnt even rock my own sticker on my car. MAYBE the engine bay thats it. on a helmet i would though

plus nothing will be free. just extremely cheap

i strickly really want Dyno #s and E/T's

itschristorres8 · May 6th, 2008, 09:11 PM

btw intake pics are on page 2 if anyone cares to see

97gt · May 6th, 2008, 09:24 PM

PM sent

MWWarlord · May 6th, 2008, 09:29 PM

Originally Posted by 97gt

PM sent

I think he wants a V6 dude.

MWWarlord · May 6th, 2008, 09:30 PM

yeah I wasn't offering to put a sticker on my car, but like I said I'll try to spread your name around.

3.8Coastie · May 6th, 2008, 09:55 PM

<--- is completely jealous of who gets picked. (no dyno or track near me

)

good luck to everyone who is trying to get sponsored!!

mustangjeff1997 · May 6th, 2008, 10:24 PM

should I send a pm or would I be wasting my time because of my weaksauce post count?

itschristorres8 · May 6th, 2008, 10:26 PM

please guys i will read all PMs and people that are interested but 1 of my rules was post.
i see it like this
if i sponsor somone that has 1000+ post on here and other sites my names going to travel faster then 100- and 200 post.
im glad your interested but that is a rule

also im getting a lot of PM some people PM me that wouldnt even consider modding they're car til now just for cheap parts
this is not so i can be used. i dont want to waste my time
ive had about 20+ PMs and still only about 3-4 im considering
sadly 96bboy and plove already have either they're top end done or the they're bottom end
cause to be honest it would have just been those 2 guys. 96bboy has nitrous plans or FI plans which work out
and plove has plans i dont know if he wants to discuss
so im considering others because of this

itschristorres8 · May 6th, 2008, 10:28 PM

Originally Posted by mustangjeff1997

should I send a pm or would I be wasting my time because of my weaksauce post count?

please try in summer
in the summer im looking more for a single port or someone with a mostly stock motor and car.
the summer will be a different type of sponsor vs this type

obdnanr · May 6th, 2008, 10:29 PM

ill tell everyone about chris who built my motor for saaaaaaaaaaaaaaaaay 10-12 seconds

itschristorres8 · May 6th, 2008, 10:31 PM

Originally Posted by obdnanr

ill tell everyone about chris who built my motor for saaaaaaaaaaaaaaaaay 10-12 seconds

just waiting for F**kin delk to send these damn mains...

if i would have known it'd be this much of a pain i would have ordered them in like feb and probably get them begining of may

plove71387 · May 6th, 2008, 10:32 PM

Originally Posted by itschristorres8

please guys i will read all PMs and people that are interested but 1 of my rules was post.
i see it like this
if i sponsor somone that has 1000+ post on here and other sites my names going to travel faster then 100- and 200 post.
im glad your interested but that is a rule

also im getting a lot of PM some people PM me that wouldnt even consider modding they're car til now just for cheap parts
this is not so i can be used. i dont want to waste my time
ive had about 20+ PMs and still only about 3-4 im considering
sadly 96bboy and plove already have either they're top end done or the they're bottom end
cause to be honest it would have just been those 2 guys. 96bboy has nitrous plans or FI plans which work out
and plove has plans i dont know if he wants to discuss
so im considering others because of this

Haha, its shareable if you really care to ive only changed my plans for the car 3 times in one month

itschristorres8 · May 6th, 2008, 10:34 PM

Originally Posted by plove71387

Haha, its share about if you really care to ive only changed my plans for the car 3 times in one month

lol well because you had the m112 that went down hill cause of vacuum lines

now you've got turbo

psh cant go wrong this time

plove71387 · May 6th, 2008, 10:35 PM

Originally Posted by itschristorres8

lol well because you had the m112 that went down hill cause of vacuum lines

now you've got turbo

psh cant go wrong this time

i had a vortech too, but yea hopefully since this is NEW i cant go wrong!!

mustangjeff1997 · May 6th, 2008, 10:52 PM

Originally Posted by itschristorres8

please try in summer
in the summer im looking more for a single port or someone with a mostly stock motor and car.
the summer will be a different type of sponsor vs this type

ok, will do! Just making sure before I waste both of our time with an essay

WLJohnson05 · May 6th, 2008, 11:44 PM

Originally Posted by mustangjeff1997

ok, will do! Just making sure before I waste both of our time with an essay

he wont read essays....read the initial post

itschristorres8 · May 7th, 2008, 12:04 AM

CHANGE IN PLANS
looking for someone that can install they're own heads, cam and intakes CORRECTLY or that lives near me
and has a $1600budget then left over for they're tuning unless they have a tuner or work with trick tuners or anyway to be able to tune!

it will consist of basically a completely redone top end and cam shaft
everything needed to install, gaskets, intakes, etc..

PM me if you fit this!

nba1341 · May 7th, 2008, 12:05 AM

gooberhead320 · May 7th, 2008, 12:28 AM

if only i was closer.... damnit.... som bitxh

EDIT: let me see if my stepdad can do this, will let you know tomorrow

punypony · May 7th, 2008, 12:36 AM

Originally Posted by itschristorres8

CHANGE IN PLANS
looking for someone that can install they're own heads, cam and intakes CORRECTLY or that lives near me
and has a $1600budget then left over for they're tuning unless they have a tuner or work with trick tuners or anyway to be able to tune!

it will consist of basically a completely redone top end and cam shaft
everything needed to install, gaskets, intakes, etc..

PM me if you fit this!

nothing terribly hard there, shouldn't thin the heard that much.

May 6th, 2008, 09:09 PM	#41
itschristorres8 I Post Entirely Way Too Much 2000 Mustang V6 n proud 13.1@107mph 2.1-60' Join Date: Aug 2006 Location: south florida Posts: 13,062	you send me a PM my sponsor ship is not like any other sponsor ship people are thinking i want them to run a huge sticker on the windshield not at all my car is completely ANTI-STICKER i wouldnt even rock my own sticker on my car. MAYBE the engine bay thats it. on a helmet i would though plus nothing will be free. just extremely cheap i strickly really want Dyno #s and E/T's __________________ Check out my site: www.crtperformance.webs.com Last edited by itschristorres8 : May 6th, 2008 at 09:13 PM.

May 6th, 2008, 09:11 PM	#42
itschristorres8 I Post Entirely Way Too Much 2000 Mustang V6 n proud 13.1@107mph 2.1-60' Join Date: Aug 2006 Location: south florida Posts: 13,062	btw intake pics are on page 2 if anyone cares to see __________________ Check out my site: www.crtperformance.webs.com

May 6th, 2008, 09:30 PM	#45
MWWarlord Hardcore Enthusiast Join Date: Sep 2007 Location: Fredericksburg, VA Posts: 1,088	yeah I wasn't offering to put a sticker on my car, but like I said I'll try to spread your name around. __________________ MWWarlord 1995 Mustang convertible Flowmaster True Dual Exhaust, BOMZ CAI, California Dream Wing Spoiler, 18" DD chrome Bullitt Rims, 265/35ZR18(front) 285/35ZR18(rear) Sumitomo HTR Z II tires, No space for the rest. http://www.tricktuners.com

May 6th, 2008, 10:24 PM	#47
mustangjeff1997 Editor 1997 Mustang 232 V6 Wake me up when I get there... Join Date: Dec 2007 Location: Under your bed Posts: 300	should I send a pm or would I be wasting my time because of my weaksauce post count? __________________ My Car: 1997 V6, basically stock Family Plaything: 2003 Mach 1, red/black, Flow's go>>>>>www.crtperformance.webs.com<<<<<here "There is no replacement for displacement"-Scott Callaway

May 6th, 2008, 10:26 PM	#48
itschristorres8 I Post Entirely Way Too Much 2000 Mustang V6 n proud 13.1@107mph 2.1-60' Join Date: Aug 2006 Location: south florida Posts: 13,062	please guys i will read all PMs and people that are interested but 1 of my rules was post. i see it like this if i sponsor somone that has 1000+ post on here and other sites my names going to travel faster then 100- and 200 post. im glad your interested but that is a rule also im getting a lot of PM some people PM me that wouldnt even consider modding they're car til now just for cheap parts this is not so i can be used. i dont want to waste my time ive had about 20+ PMs and still only about 3-4 im considering sadly 96bboy and plove already have either they're top end done or the they're bottom end cause to be honest it would have just been those 2 guys. 96bboy has nitrous plans or FI plans which work out and plove has plans i dont know if he wants to discuss so im considering others because of this __________________ Check out my site: www.crtperformance.webs.com

May 6th, 2008, 09:24 PM	#43
97gt Regular 1996 Mustang GT Join Date: Feb 2007 Location: Phoenix, AZ Posts: 216	PM sent

May 6th, 2008, 10:29 PM	#50
obdnanr Enthusiast 2003 v6 280RWHP Join Date: Nov 2007 Location: GA Posts: 589	ill tell everyone about chris who built my motor for saaaaaaaaaaaaaaaaay 10-12 seconds __________________ Procharger D1SC 9LBS boost, Borla Cat back, MAC LONG TUBE headers, 39# injectors, 8.8 gt rear end with 3.73's, t-lok, 31 spline axles, aluminum drive shaft, BFG drag radials

May 7th, 2008, 12:04 AM	#57
itschristorres8 I Post Entirely Way Too Much 2000 Mustang V6 n proud 13.1@107mph 2.1-60' Join Date: Aug 2006 Location: south florida Posts: 13,062	CHANGE IN PLANS looking for someone that can install they're own heads, cam and intakes CORRECTLY or that lives near me and has a $1600budget then left over for they're tuning unless they have a tuner or work with trick tuners or anyway to be able to tune! it will consist of basically a completely redone top end and cam shaft everything needed to install, gaskets, intakes, etc.. PM me if you fit this! __________________ Check out my site: www.crtperformance.webs.com

May 7th, 2008, 12:05 AM	#58
nba1341 Hardcore Enthusiast 1965 Mustang Fastback Join Date: Apr 2007 Location: Los Angeles, Cal Posts: 24,982 Posts: 2,078	__________________ I'm a good boy now. slow car club - crew member 7 of 9 Mood: Cool

Threads Similar to: CRT Performance is looking to sponsor
Thread	Thread Starter	Forum	Replies	Last Post
how can I become a sponsor?	7-up man	The Clubhouse	10	March 19th, 2008 11:05 PM
itschristorres08 and CRT Performance	Onemanzu	Member Buy / Sell Feedback	8	March 19th, 2008 02:06 PM
sponsor	riddlee josh	The Clubhouse	11	February 16th, 2008 01:45 AM
Looking to sponsor a Mustang in Central Jersey Area!	402 Motoring	Northeast	9	October 3rd, 2007 11:41 AM
New Sponsor on the Site	StangMods	New Members Introductions	11	February 11th, 2007 07:02 PM

All times are GMT -4. The time now is 08:56 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.