CRT Performance is looking to sponsor

itschristorres8 · May 7th, 2008, 12:39 AM

Originally Posted by punypony

nothing terribly hard there, shouldn't thin the heard that much.

i'd prefer someone local so i can install or someone knowledged enough
i have huge trust issues and its hard for me to trust people. no one but me installs anything on my car. so for this im kinda the same

the budget is set kind of high because the cam kit, valve train is expensive

Lankolf · May 7th, 2008, 12:51 AM

I rebuilt my top end when my head gasket blew about 8k miles ago. I have the know how

Can I pm you?

itschristorres8 · May 7th, 2008, 12:53 AM

Originally Posted by Lankolf

I rebuilt my top end when my head gasket blew about 8k miles ago. I have the know how Can I pm you?

if you have the budget yes

Lankolf · May 7th, 2008, 01:27 AM

I have the budget, but I'm taking off on an internship this summer. I think the wisest course of action would be for me to hold off until I post a bit more and prove my expertise across a whole range of mechanics. It's tempting to dump all my savings into my car, and I would be honored to support a rising v6 performance company built not only by somebody of my own age, but somebody who has shared a lot of knowledge with me, but I feel the time is not yet ripe and I'm still thinking about turbos (since I have them sitting in my trunk with half the needed parts). Maybe later this summer we can get together and make a plan that benefits us both (retail price). I would like to go around sporting a bad ass v6 that blows people's minds and then boast about how it's the expertise of CRT Performance.

3.8Coastie · May 7th, 2008, 05:43 PM

if i was closer id be all over this... good luck chris and to whoever get the sponsorship... have fun. i can vouch for torres

poindexter18 · May 8th, 2008, 08:19 PM

If you wanna get your name out send me some money and I'll get CRT PERFORMANCE tattooed on my butt. Wait.... Then I will go to the mall and moon people until i get approached by media people. Then When they ask me why I did it I'll give em some good story about how I love CRT and blah blah blah. It's a fool proof plan!

Hahahahahaha. But I say you look into getting stickers made. And then ship em out with your goods. Cuz I know I'd rock a stick or two when I finally get the money for my P&P stuff. =P

-poindexter-

itschristorres8 · May 8th, 2008, 10:24 PM

Mike Johnson has won a sponsorship
BUT his is SINGLE PORT.
i have 1 potiential split port im awaiting a response from

plove71387 · May 8th, 2008, 10:33 PM

Originally Posted by itschristorres8

Mike Johnson has won a sponsorship
BUT his is SINGLE PORT.
i have 1 potiential split port im awaiting a response from

nice, way to go Mike!

Chris you got cards or anything?

itschristorres8 · May 8th, 2008, 10:52 PM

Originally Posted by plove71387

nice, way to go Mike!

Chris you got cards or anything?

=/ no slacking

plove71387 · May 8th, 2008, 11:01 PM

Originally Posted by itschristorres8

=/ no slacking

Come on man, how ya gonna spread your name with no cards or stickers?

-Preston

Onemanzu · May 8th, 2008, 11:02 PM

who the hell is mike?

WLJohnson05 · May 8th, 2008, 11:05 PM

Originally Posted by Onemanzu

who the hell is mike?

+1 are we related haha

plove71387 · May 8th, 2008, 11:09 PM

Originally Posted by Onemanzu

who the hell is mike?

Originally Posted by WLJohnson05

+1 are we related haha

Pretty sure its his user name, Forums at Modded Mustangs - View Profile: Mike Johnson

i could be wrong tho?

MakeHerScream04 · May 8th, 2008, 11:56 PM

sponser me bitchh

itschristorres8 · May 9th, 2008, 12:09 AM

Originally Posted by MakeHerScream04

sponser me bitchh

um yea... thats an easy way to get one

WLJohnson05 · May 9th, 2008, 12:28 AM

Originally Posted by itschristorres8

um yea... thats an easy way to get one

at least he asked nicely

itschristorres8 · May 9th, 2008, 12:39 AM

Originally Posted by plove71387

Pretty sure its his user name, Forums at Modded Mustangs - View Profile: Mike Johnson

i could be wrong tho?

yes thats him
his profile is impressive and he's got snap on tool which is

worked in a few auto fields
we'll be doing ported single port intakes and heads on his car with a cam shaft and upgraded valve train. he's going to be ordering LT headers and MAC exhaust and MAC CAI. then dyno his car WITH THOSE MODS ON
then install my parts and get another dyno
Aiming for 200+rwhp hopefully 210rwhp being its a single port

plove71387 · May 9th, 2008, 12:42 AM

Originally Posted by itschristorres8

yes thats him
his profile is impressive and he's got snap on tool which is
worked in a few auto fields
we'll be doing ported single port intakes and heads on his car with a cam shaft and upgraded valve train. he's going to be ordering LT headers and MAC exhaust and MAC CAI. then dyno his car WITH THOSE MODS ON
then install my parts and get another dyno
Aiming for 200+rwhp hopefully 210rwhp being its a single port

Just a lucky guess i take it

nice, sounds like a nice gain there

good luck with that guys!

Onemanzu · May 9th, 2008, 01:47 AM

Originally Posted by itschristorres8

yes thats him
his profile is impressive and he's got snap on tool which is
worked in a few auto fields
we'll be doing ported single port intakes and heads on his car with a cam shaft and upgraded valve train. he's going to be ordering LT headers and MAC exhaust and MAC CAI. then dyno his car WITH THOSE MODS ON
then install my parts and get another dyno
Aiming for 200+rwhp hopefully 210rwhp being its a single port

talk with crazylegs, he has a hook up with Mac... last i knew anyways

3.8Coastie · May 9th, 2008, 07:04 PM

145 posts? no wonder ive never heard of the guy... good luck with that chris

May 7th, 2008, 12:51 AM	#62
Lankolf Regular 97' 3.8 and 65' GT 289 Join Date: Aug 2007 Location: Colorado Posts: 152	I rebuilt my top end when my head gasket blew about 8k miles ago. I have the know how Can I pm you? __________________ Your love of the Halfling's leaf has clearly Slowed your mind. -Saruman, Fellowship of the Ring I am the Lizard King, I can do anything. -Jim Morrison, The Doors

May 7th, 2008, 01:27 AM	#64
Lankolf Regular 97' 3.8 and 65' GT 289 Join Date: Aug 2007 Location: Colorado Posts: 152	I have the budget, but I'm taking off on an internship this summer. I think the wisest course of action would be for me to hold off until I post a bit more and prove my expertise across a whole range of mechanics. It's tempting to dump all my savings into my car, and I would be honored to support a rising v6 performance company built not only by somebody of my own age, but somebody who has shared a lot of knowledge with me, but I feel the time is not yet ripe and I'm still thinking about turbos (since I have them sitting in my trunk with half the needed parts). Maybe later this summer we can get together and make a plan that benefits us both (retail price). I would like to go around sporting a bad ass v6 that blows people's minds and then boast about how it's the expertise of CRT Performance. __________________ Your love of the Halfling's leaf has clearly Slowed your mind. -Saruman, Fellowship of the Ring I am the Lizard King, I can do anything. -Jim Morrison, The Doors

May 8th, 2008, 08:19 PM	#66
poindexter18 Regular '95 mustang sixer Shrugs Join Date: May 2007 Location: Everett, WA Posts: 81	If you wanna get your name out send me some money and I'll get CRT PERFORMANCE tattooed on my butt. Wait.... Then I will go to the mall and moon people until i get approached by media people. Then When they ask me why I did it I'll give em some good story about how I love CRT and blah blah blah. It's a fool proof plan! Hahahahahaha. But I say you look into getting stickers made. And then ship em out with your goods. Cuz I know I'd rock a stick or two when I finally get the money for my P&P stuff. =P -poindexter- __________________ License Plate says it all. Last edited by poindexter18 : May 8th, 2008 at 08:22 PM.

May 8th, 2008, 10:24 PM	#67
itschristorres8 I Post Entirely Way Too Much 2000 Mustang V6 n proud 13.1@107mph 2.1-60' Join Date: Aug 2006 Location: south florida Posts: 13,117	Mike Johnson has won a sponsorship BUT his is SINGLE PORT. i have 1 potiential split port im awaiting a response from __________________ Check out my site: www.crtperformance.webs.com

May 8th, 2008, 11:56 PM	#74
MakeHerScream04 Newbie 2004 mustang Join Date: May 2008 Location: South Florida Scene Posts: 11	sponser me bitchh __________________ vrroom psst. AKA myPONYisHard

Threads Similar to: CRT Performance is looking to sponsor
Thread	Thread Starter	Forum	Replies	Last Post
how can I become a sponsor?	7-up man	The Clubhouse	10	March 19th, 2008 11:05 PM
itschristorres08 and CRT Performance	Onemanzu	Member Buy / Sell Feedback	8	March 19th, 2008 02:06 PM
sponsor	riddlee josh	The Clubhouse	11	February 16th, 2008 01:45 AM
Looking to sponsor a Mustang in Central Jersey Area!	402 Motoring	Northeast	9	October 3rd, 2007 11:41 AM
New Sponsor on the Site	StangMods	New Members Introductions	11	February 11th, 2007 07:02 PM

All times are GMT -4. The time now is 06:55 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.