My Turbo install with Windstar upper swap

itschristorres8 · May 8th, 2008, 03:59 PM

Originally Posted by MWWarlord

Congrats WLJ. Punypony...it doesn't matter how big the turbo is as long as he runs it at a low psi. Up to 8 psi is fine on the stock lower. You can even push that to 10 psi, but that can be a bit risky. Hey Woody, I would go ahead and get that wideband before you do the install. You're gonna need it to get a proper tune.

turbo size is a huge roll..if you get a t80 turbo on a stock motor v6 you'll be wasting time...
personally i too think a Gt40 is a tad big for a stock motor. Andy ran the same turbo though. for a single port it is to big IMO

Andy knows. ive told him about the 4.4psi

i believe that was with older wastegates he used to use. and never changed the 4.4 on the site

he used to have much older kits that for least part were not as good or impressive as his new kits that kick ass

WLJohnson05 · May 8th, 2008, 05:20 PM

Originally Posted by itschristorres8

turbo size is a huge roll..if you get a t80 turbo on a stock motor v6 you'll be wasting time...
personally i too think a Gt40 is a tad big for a stock motor. Andy ran the same turbo though. for a single port it is to big IMO

Andy knows. ive told him about the 4.4psi

i believe that was with older wastegates he used to use. and never changed the 4.4 on the site

he used to have much older kits that for least part were not as good or impressive as his new kits that kick ass

yea true story, but this will do all i want to do

WLJohnson05 · May 8th, 2008, 09:19 PM

just ordered my wideband...ugh...more money...anyway so that is on its way. install might have to be pushed back till sunday night or monday bc of mothers day weekend and our family going to my gparents house across the river...so i have other things to do on saturday morning and if i have any free time in between that and leaving to go, i will start the install. if i get around to it tomorrow night i will get pics up of all the stuff.

Onemanzu · May 8th, 2008, 09:21 PM

hey look at it this way, your home for the summer, you can do w.e you want now

itschristorres8 · May 8th, 2008, 09:24 PM

so you know it takes about 20hours to install. or more. 20full hours

be ready! =D

WLJohnson05 · May 8th, 2008, 09:34 PM

Originally Posted by Onemanzu

hey look at it this way, your home for the summer, you can do w.e you want now

not yet....still got two exams tomorrow...no fun...and i have to have everything done before june 27th bc thats when i leave for my job and wont be back till august 3rd

Originally Posted by itschristorres8

so you know it takes about 20hours to install. or more. 20full hours

be ready! =D

haha i do know that....im prolly gonna split things up over a few days so i dont get totally pissed and tired. since my install got pushed back im thinking that hopefully i will be done by next friday. so next weekend i can have a little fun with it

then hopefully i can get the exhaust and other stuff that i have to take to ryan during the weekend too. then after completion of the turbo windstar setup, i will be working on the new rsd setup and painting the interior,so i pretty much wont have any time to play with my car for a while...but i will do plenty of pics and maybe some vids.

rydog · May 9th, 2008, 09:52 AM

Actually that GT40 is only a .54trim and .72A/R and spooled rather nicely on my single port and Woody will pushing more are through his windstar and split port so he will be good to go

WLJohnson05 · May 9th, 2008, 10:26 AM

Originally Posted by rydog

Actually that GT40 is only a .54trim and .72A/R and spooled rather nicely on my single port and Woody will pushing more are through his windstar and split port so he will be good to go

bingo

....it seemed like it spooled fast enough for me when we were on the test drive

WLJohnson05 · May 10th, 2008, 01:37 AM

ups says my wideband should be here on wednesday

ESG-642T · May 10th, 2008, 02:36 AM

WLJohnson05 · May 10th, 2008, 03:03 AM

Originally Posted by SSStang

haha very true, its all still in my car... if i get the chance tomorrow i will snap some pictures of everything no worries

WLJohnson05 · May 10th, 2008, 03:16 AM

heres some pics i finally got off my phone, hopefully they will keep u guys occupied for now till i get pics of individual pieces

WLJohnson05 · May 10th, 2008, 07:37 PM

ok i got everything out of my car and have setup in the garage. only time i had today was to start taking stuff off the old upper intake

Onemanzu · May 10th, 2008, 08:22 PM

Noice

04mustang232 · May 10th, 2008, 11:23 PM

thats sick, keep updated

WLJohnson05 · May 10th, 2008, 11:54 PM

Originally Posted by 04mustang232

thats sick, keep updated

would have more updates by now but my family is gettin together for mothers day and my cousins bday is soon too so we are at my gparents house, otherwise i would be prolly workin on it at this moment haha

itschristorres8 · May 11th, 2008, 11:07 AM

damm i wish my wastegate was like that
be much easier to change springs

WLJohnson05 · May 11th, 2008, 12:04 PM

Originally Posted by itschristorres8

damm i wish my wastegate was like that
be much easier to change springs

i need to do that too it still has the 10psi spring in it..any trick to it?

ChrisJ · May 11th, 2008, 12:07 PM

Cant wait to see this in person...

BPS?

Ninjawafers! · May 11th, 2008, 12:17 PM

sweet. definitely keep us updated with the progress.

May 8th, 2008, 09:19 PM	#23
WLJohnson05 MM's Database Error 2004 Mustang V6 322.8 rwhp Join Date: Mar 2007 Location: VA Posts: 13,285 iTrader: 9 reviews	just ordered my wideband...ugh...more money...anyway so that is on its way. install might have to be pushed back till sunday night or monday bc of mothers day weekend and our family going to my gparents house across the river...so i have other things to do on saturday morning and if i have any free time in between that and leaving to go, i will start the install. if i get around to it tomorrow night i will get pics up of all the stuff. __________________ I'm trying to get rid of this stuff, feel free to make me an offer!: SCT Mass Air Flow Sensor $200 Tial Wastegate Springs $40 (10psi and 3.6psi)

May 8th, 2008, 09:21 PM	#24
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	hey look at it this way, your home for the summer, you can do w.e you want now __________________ My Foz

May 8th, 2008, 09:24 PM	#25
itschristorres8 Banned 00 V6 & 09 GT 13.37@104.4mph--BONE stock GT Join Date: Aug 2006 Location: south florida Posts: 15,806 iTrader: 2 reviews	so you know it takes about 20hours to install. or more. 20full hours be ready! =D __________________ [SIGPIC][/SIGPIC] Acmillr loves me

May 9th, 2008, 09:52 AM	#27
rydog Regular Join Date: Aug 2007 Location: Hampton, VA Posts: 114 iTrader: 0 reviews	Actually that GT40 is only a .54trim and .72A/R and spooled rather nicely on my single port and Woody will pushing more are through his windstar and split port so he will be good to go __________________ 97 V6-GT40 turbo Turbo'd by-TMA Turbo(http://www.tmaturbo.com/) Tuned by-Dyno Tuned Performance(http://www.dtpracing.com/) Last edited by rydog; May 9th, 2008 at 09:57 AM.

May 10th, 2008, 01:37 AM	#29
WLJohnson05 MM's Database Error 2004 Mustang V6 322.8 rwhp Join Date: Mar 2007 Location: VA Posts: 13,285 iTrader: 9 reviews	ups says my wideband should be here on wednesday __________________ I'm trying to get rid of this stuff, feel free to make me an offer!: SCT Mass Air Flow Sensor $200 Tial Wastegate Springs $40 (10psi and 3.6psi)

May 10th, 2008, 02:36 AM	#30
ESG-642T [8MINUS2] 2002, Ford, v6 Join Date: Feb 2007 Location: TEXAS Posts: 12,319 iTrader: 0 reviews	__________________ Hi, You can call me Kyle Random ESG fact: Had a prochamber on his v6 before it was popular. WTB: v6 BBK valve covers

May 10th, 2008, 03:16 AM	#32
WLJohnson05 MM's Database Error 2004 Mustang V6 322.8 rwhp Join Date: Mar 2007 Location: VA Posts: 13,285 iTrader: 9 reviews	heres some pics i finally got off my phone, hopefully they will keep u guys occupied for now till i get pics of individual pieces __________________ I'm trying to get rid of this stuff, feel free to make me an offer!: SCT Mass Air Flow Sensor $200 Tial Wastegate Springs $40 (10psi and 3.6psi)

May 10th, 2008, 07:37 PM	#33
WLJohnson05 MM's Database Error 2004 Mustang V6 322.8 rwhp Join Date: Mar 2007 Location: VA Posts: 13,285 iTrader: 9 reviews	ok i got everything out of my car and have setup in the garage. only time i had today was to start taking stuff off the old upper intake __________________ I'm trying to get rid of this stuff, feel free to make me an offer!: SCT Mass Air Flow Sensor $200 Tial Wastegate Springs $40 (10psi and 3.6psi)

May 10th, 2008, 08:22 PM	#34
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	Noice __________________ My Foz

May 11th, 2008, 11:07 AM	#37
itschristorres8 Banned 00 V6 & 09 GT 13.37@104.4mph--BONE stock GT Join Date: Aug 2006 Location: south florida Posts: 15,806 iTrader: 2 reviews	damm i wish my wastegate was like that be much easier to change springs __________________ [SIGPIC][/SIGPIC] Acmillr loves me

May 11th, 2008, 12:07 PM	#39
ChrisJ RLY SRS Join Date: Aug 2005 Location: Ft. Meade, MD Posts: 38,220 Blog Entries: 4 iTrader: 10 reviews	Cant wait to see this in person... BPS? __________________ 2008 Acura TL Type-S - 2008 EB Ford Expedition - 2002 Boosted GT - Sold Facebook Google+

May 11th, 2008, 12:17 PM	#40
Ninjawafers! muneris pro ego 97 5.0 Exploder AWD snow has nuthin on me Join Date: Aug 2006 Location: Kodiak, AK Posts: 7,379 iTrader: 1 reviews	sweet. definitely keep us updated with the progress. __________________ Buy my M90 Kit and my Gears and T-Loc! MM ZDC - Alaska Base Commander MM+ Cleavage Club #24 MM Cares Crew / Military Crew M2C2 President / USCG - OS2

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/v6-mustangs/69958-my-turbo-install-windstar-upper-swap.html
Posted By	For	Type	Date
My Turbo install with Windstar upper swap - Page 14	This thread	Refback	June 4th, 2008 11:24 PM

Threads Similar to: My Turbo install with Windstar upper swap
Thread	Thread Starter	Forum	Replies	Last Post
Turbo mustang with windstar upper	WLJohnson05	V6 Mustangs	41	May 4th, 2008 08:53 PM
Install Upper control arm..	2006greyGT	2005 - 2010	7	March 23rd, 2008 08:28 PM
Removal/install of upper intake manifold	Stang6899	V6 Mustangs	9	February 14th, 2008 12:54 PM
Before/After Windstar Intake Swap Pics	One Bad Sixxx	V6 Mustangs	46	December 18th, 2007 10:13 AM
Upper & Lower control Arm install	stang94	5.0 Mustangs	3	January 11th, 2007 08:53 PM

All times are GMT -4. The time now is 05:16 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.