What Is This?

		Forums at Modded Mustangs > Mustang Forums > V6 Mustangs
What Is This?

Discussing What Is This? in the V6 Mustangs Forum. and gee it kinda melted some how i'm unsure but i'm geussing this ...

Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free!

LinkBack

Thread Tools

November 8th, 2006, 06:04 PM	#1
scubasteve041186 Hardcore Enthusiast 2004 mustang 40th annv. Join Date: Sep 2006 Location: kelowna,BC, Canada Posts: 1,374	What Is This? and gee it kinda melted some how i'm unsure but i'm geussing this is my oil pressure sensor wiring. [/img]

November 8th, 2006, 08:15 PM	#2
AtlanticBlue99 The Nice Guy 1999 Ford Mustang V6 14.79 @ 92.15 Join Date: Aug 2005 Location: UGA Posts: 8,251	vaccuum lines from egr/dpfe to intake manifold. helps recirculate exhaust and unburnt fuel to be reburned for fuel economy.... __________________ ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.

November 9th, 2006, 12:46 AM	#3
scubasteve041186 Hardcore Enthusiast 2004 mustang 40th annv. Join Date: Sep 2006 Location: kelowna,BC, Canada Posts: 1,374	so just go to ford and ask for new ones or what? cause the one red wire is toast inside it's melted all the way through

November 9th, 2006, 08:06 AM	#4
AtlanticBlue99 The Nice Guy 1999 Ford Mustang V6 14.79 @ 92.15 Join Date: Aug 2005 Location: UGA Posts: 8,251	that isnt a "WIRE" it is a "HOSE." these are vaccuum lines for air to travel through, and you can get them from ford or from a place like autozone too. your car will run fine without these lines if you plug the posts the lines connect to with vaccuum seals, or you could get that vaccuum harness cheap __________________ ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.

November 9th, 2006, 12:20 PM	#5
scubasteve041186 Hardcore Enthusiast 2004 mustang 40th annv. Join Date: Sep 2006 Location: kelowna,BC, Canada Posts: 1,374	thanks AB i was just hoping it wasn;t anything too important

November 9th, 2006, 05:17 PM	#6
AtlanticBlue99 The Nice Guy 1999 Ford Mustang V6 14.79 @ 92.15 Join Date: Aug 2005 Location: UGA Posts: 8,251	dont just remove it without replacing or capping it though. the main flow goes through th large EGR pipe from the exhaust manifold to the egr pump and then intake manifold at the front of the block. this is just icing on the emissions cake __________________ ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.

All times are GMT -4. The time now is 03:52 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.