6/22/08 (v6) Underhood / Mods Thread

ESG-642T · June 22nd, 2008, 07:55 PM

Just like the title says.

Post 1 - 3 pictures of your under hood.
Post your /performance/ mod list

Go!

itschristorres8 · June 22nd, 2008, 11:32 PM

7.5 inch pistons, intaker, 200shot of nos 18psi twin turbo and s/c, idk what fuel injectors. 210 to the wheels but the wheels keep spining on the dyno so who knows..

seriously
well in previous working condition motor stats were:
TMA Turbo Race Kit 1 3/4 primaries on the headers
SC44 Turbo Tial waste gate and blow off valve
11.6psi spring in the waste gate
Ported upper intake with inlet ported to 70mm
65mm throttle body
25% UD pulley
Screamin demon coil pack
MSD ignition 8.5 wires connected to 103 autolite plugs
SCT Xcal2
BA2800 MAF
EGR Delete custom made unlike what i sell..idk why i run mine though..
Magnaflow single dumped muffler 2.5inch...im slackin i know

Fuel
42lb fuel injectors
310lph fuel pump

Driveline
G-force built Tranny rated to 600hp-promotion built upgraded input and output shaft
Aluminum Spec flywheel
Stage 2+clutch 26spline!
aluminum Driveshaft
Detriot Trutrac on stock gears and axles

Other bs
Ford Racing Boost/vacuum and oil pressure gauge
17x9 on all corners cobra R deep dish black with a chrome lip riveted
Ebay tires up front
Nitto 555r (drag radials) in back 275/40/17

Results
on 5.8psi car made 279rwhp and 293rwtq no dyno tune just xcal2 base tune running rich
no-aluminum driveshaft, stock tranny, stock flywheel
on 8.7psi- 313rwhp and 318rwtq same as above no dyno tune, same tune.
11.6psi-cold motor blown. Driver error

coming next motor
Selfported CRT Performance ( CRT RACING PERFORMANCE | ) cylinder heads, stock valves
.580-.600 comp springs
CRT self ported Lower intake
216/216 .560 lift regrind camshaft from RPM
01 short block STOCK
Oh and of course ARP Head Studs!

install-all me. every single modification, even the new motor to come.

RavensChild · June 23rd, 2008, 12:31 AM

i should have shown you mine before yesterday i had mud and shit in it. Probably still do, i didnt wash under the hood lol

Orangester · June 23rd, 2008, 01:44 AM

I wish I had the time, money, and abilities you do Torres. All that work is damn respectable and well done.

Edit: And work ethic. =p

dgt_mustang · June 23rd, 2008, 07:21 AM

+1 on Orangester

itschristorres8 · June 23rd, 2008, 09:51 AM

lol psh i wish i had time too. i got lucky this week with hours and having the week of school off. put it this way i'll be porting my heads and lower intake at 11pm to 12 or 1. then shower and sleep and wake up at 7, school work and same thing

dgt_mustang · June 23rd, 2008, 11:37 AM

Ha, thats that work ethic example, lol.

Avaric3 · June 23rd, 2008, 01:21 PM

i dont have underhood pics cuz its nasty in there lol but anyways, heres all my mods-

-----GO-----
Xcal 3
Tunable Induction CAI
Mac Longtube Headers
Mac O/R H-Pipe
Mac Catback dumped before axle
ASP 25% Underdrive Pulleys
FRPP 4.10 Gears
FRPP Traction Lock

-----SHOW-----
Chrome Bullitt Rims 205/65-15 front & 275/50-15 Nitto 555R in rear
03-04 Cobra Front Bumper
03-04 Fiberglass Cobra Hood
Chrome Bumper Inserts
UPR Chrome Interior Pieces
Rear Seat Delete

and heres my mods to come in the near future, most of these i already have sittin in my room and some of them im waitin on still-

Windstar Upper Intake
VAP 1/2" Intake Spacer
P&P Lower Intake
FRPP Aluminum Driveshaft
Lakewood 90/10 Struts
Lakewood 50/50 Shocks
MMR Front Coil-Overs
Eibach Sportlines in rear
UPR Caster Camber Plates

dgt_mustang · June 23rd, 2008, 01:23 PM

what is a tuneable cold air intake? is that like having the mass airflow sensor on there that you can tune?

shakerstang · June 24th, 2008, 11:21 AM

CarDomain.com Image
CDC shaker intake
Bassani cat back

i know its not much but how many 6 bangers do u see with a shaker?

HMUSN · June 24th, 2008, 11:22 AM

Originally Posted by dgt_mustang

what is a tuneable cold air intake? is that like having the mass airflow sensor on there that you can tune?

it's just the name of the product. I had one on my 6er

dgt_mustang · June 24th, 2008, 11:41 AM

Hey SSStang, how come you made this thread of posting pictures and a mod list but didnt do your own yet?

Avaric3 · June 28th, 2008, 04:43 PM

im bumpin this shit cuz i wanna see some strong sixers here!!

plove71387 · June 28th, 2008, 04:45 PM

sigh, i dont have any pictures of under the hood shots of my car only cause its in the shop. . . should have it back in a week or so, ill post pictures tehn with all my mods.

ByPopularDemand · June 28th, 2008, 04:58 PM

My performance mods are in my sig...too bad I cant snap a few shots of the stang tho...I didnt drive it today

dgt_mustang · June 28th, 2008, 05:52 PM

still waiting on the OP pics of his under-hood shots

ESG-642T · June 28th, 2008, 06:31 PM

Performance:
Vortech V1 S trim supercharger
3.12 pulley
Gates 111.5" belt
Mac Long Tube Headers
Mac Pro Chamber
Flowmaster original 40 mufflers

Fuel
03 cobra 39/42lb fuel injectors
310lph fuel pump

Driveline
Eaton Traction Lock
Motive 3.73 gears

Misc
Xcal LiveWire
Screamin Demon Coil
"livewires" spark plug wires
NGK Tr6 gapped .030 plugs
PCV / EGR delete

Results
7.5 psi: Made 255/273 SAE-5 with a spark/imrc issue.

WLJohnson05 · June 28th, 2008, 06:53 PM

PERFORMANCE MODS:
-Windstar upper intake
-EGR delete
-IAC relocation plate
-Precision Garrett GT4088 .72 turbine a/r
-Tial 38 mm wastegate - 7.2 psi (3.6psi spring in right now)
-HKS Bov
-16 guage mild steel log headers - 1.5" primaries with 2 1/8" log headers merged into a T4 turbine
-3" mild steel single exhaust dump - single 3" exhaust dump pipe routing to underneath the car then through a 3" Magnaflow muffler that dumps right before the axle
-OBX Intercooler
-K &N Filter
-44# injectors
-310 LP fuel pump (not installed yet)
-SCT BigAir2800 MAF
-Sniper Tune
-Jmod valve body swap
-Eibach Pro Kit
-Innovate LC-1 Wideband
-T-Lok (not installed yet)

VISUAL / JUST FOR FUN MODS:
interior neons (blue)
engine neon (blue)
underglow neon (blue)
mach2 hood
billet hvac controls
shorty antenna mod
grille neons (blue)
trunk neons (blue)
push button start
black horse, srs, horn, script on dash and steering wheel
third brake light overlay "JOHNSON"
rocker panel stripes "MUSTANG"
rear bumper letters "MUSTANG"
door handle horse decals
Kenwood KDC-x790 head unit
Kenwood 1800 amp
10" Audiobahn Subwoofer
18" Mach1 chrome with black wheels
Custom Built Rear Seat Delete (UNDER CONSTRUCTION)
Custom Sub Box (UNDER CONSTRUCTION)
roush grille
custom designed gauges
center console switch panel
custom built fiberglass switch panel for bass booster, amp turn on, and underglow

Avaric3 · June 28th, 2008, 08:16 PM

Originally Posted by WLJohnson05

PERFORMANCE MODS:
-Windstar upper intake
-EGR delete
-IAC relocation plate
-Precision Garrett GT4088 .72 turbine a/r
-Tial 38 mm wastegate - 7.2 psi (3.6psi spring in right now)
-HKS Bov
-16 guage mild steel log headers - 1.5" primaries with 2 1/8" log headers merged into a T4 turbine
-3" mild steel single exhaust dump - single 3" exhaust dump pipe routing to underneath the car then through a 3" Magnaflow muffler that dumps right before the axle
-OBX Intercooler
-K &N Filter
-44# injectors
-310 LP fuel pump (not installed yet)
-SCT BigAir2800 MAF
-Sniper Tune
-Jmod valve body swap
-Eibach Pro Kit
-Innovate LC-1 Wideband
-T-Lok (not installed yet)

shits weak

WLJohnson05 · June 29th, 2008, 12:07 AM

Originally Posted by Avaric3

shits weak

it gets me from point A to point B

June 22nd, 2008, 07:55 PM	#1
ESG-642T [8MINUS2] 2002, Ford, v6 Join Date: Feb 2007 Location: TEXAS Posts: 12,319 iTrader: 0 reviews	6/22/08 (v6) Underhood / Mods Thread Just like the title says. Post 1 - 3 pictures of your under hood. Post your /performance/ mod list Go! __________________ Hi, You can call me Kyle Random ESG fact: Had a prochamber on his v6 before it was popular. WTB: v6 BBK valve covers

June 22nd, 2008, 11:32 PM	#2
itschristorres8 Banned 00 V6 & 09 GT 13.37@104.4mph--BONE stock GT Join Date: Aug 2006 Location: south florida Posts: 15,806 iTrader: 2 reviews	7.5 inch pistons, intaker, 200shot of nos 18psi twin turbo and s/c, idk what fuel injectors. 210 to the wheels but the wheels keep spining on the dyno so who knows.. seriously well in previous working condition motor stats were: TMA Turbo Race Kit 1 3/4 primaries on the headers SC44 Turbo Tial waste gate and blow off valve 11.6psi spring in the waste gate Ported upper intake with inlet ported to 70mm 65mm throttle body 25% UD pulley Screamin demon coil pack MSD ignition 8.5 wires connected to 103 autolite plugs SCT Xcal2 BA2800 MAF EGR Delete custom made unlike what i sell..idk why i run mine though.. Magnaflow single dumped muffler 2.5inch...im slackin i know Fuel 42lb fuel injectors 310lph fuel pump Driveline G-force built Tranny rated to 600hp-promotion built upgraded input and output shaft Aluminum Spec flywheel Stage 2+clutch 26spline! aluminum Driveshaft Detriot Trutrac on stock gears and axles Other bs Ford Racing Boost/vacuum and oil pressure gauge 17x9 on all corners cobra R deep dish black with a chrome lip riveted Ebay tires up front Nitto 555r (drag radials) in back 275/40/17 Results on 5.8psi car made 279rwhp and 293rwtq no dyno tune just xcal2 base tune running rich no-aluminum driveshaft, stock tranny, stock flywheel on 8.7psi- 313rwhp and 318rwtq same as above no dyno tune, same tune. 11.6psi-cold motor blown. Driver error coming next motor Selfported CRT Performance ( CRT RACING PERFORMANCE \| ) cylinder heads, stock valves .580-.600 comp springs CRT self ported Lower intake 216/216 .560 lift regrind camshaft from RPM 01 short block STOCK Oh and of course ARP Head Studs! install-all me. every single modification, even the new motor to come. __________________ [SIGPIC][/SIGPIC] Acmillr loves me

June 23rd, 2008, 09:51 AM	#6
itschristorres8 Banned 00 V6 & 09 GT 13.37@104.4mph--BONE stock GT Join Date: Aug 2006 Location: south florida Posts: 15,806 iTrader: 2 reviews	lol psh i wish i had time too. i got lucky this week with hours and having the week of school off. put it this way i'll be porting my heads and lower intake at 11pm to 12 or 1. then shower and sleep and wake up at 7, school work and same thing __________________ [SIGPIC][/SIGPIC] Acmillr loves me

June 23rd, 2008, 01:21 PM	#8
Avaric3 Hardcore Enthusiast 2002 Ford Focus slow as fuck Join Date: Apr 2007 Location: M-Pan, NJ Posts: 2,556 iTrader: 4 reviews	i dont have underhood pics cuz its nasty in there lol but anyways, heres all my mods- -----GO----- Xcal 3 Tunable Induction CAI Mac Longtube Headers Mac O/R H-Pipe Mac Catback dumped before axle ASP 25% Underdrive Pulleys FRPP 4.10 Gears FRPP Traction Lock -----SHOW----- Chrome Bullitt Rims 205/65-15 front & 275/50-15 Nitto 555R in rear 03-04 Cobra Front Bumper 03-04 Fiberglass Cobra Hood Chrome Bumper Inserts UPR Chrome Interior Pieces Rear Seat Delete and heres my mods to come in the near future, most of these i already have sittin in my room and some of them im waitin on still- Windstar Upper Intake VAP 1/2" Intake Spacer P&P Lower Intake FRPP Aluminum Driveshaft Lakewood 90/10 Struts Lakewood 50/50 Shocks MMR Front Coil-Overs Eibach Sportlines in rear UPR Caster Camber Plates __________________ 99 V6 Mustang-sold 02 Ford Focus-sold 98 Camaro Z/28-lid, catback

June 24th, 2008, 11:21 AM	#10
shakerstang Newbie Join Date: Dec 2006 Posts: 2 iTrader: 0 reviews	CarDomain.com Image CDC shaker intake Bassani cat back i know its not much but how many 6 bangers do u see with a shaker? Last edited by shakerstang; June 24th, 2008 at 11:24 AM.

June 23rd, 2008, 01:44 AM	#4
Orangester Regular Join Date: Jan 2007 Location: Quad Cities, Iowa Posts: 372 iTrader: 0 reviews	I wish I had the time, money, and abilities you do Torres. All that work is damn respectable and well done. Edit: And work ethic. =p

June 28th, 2008, 04:43 PM	#13
Avaric3 Hardcore Enthusiast 2002 Ford Focus slow as fuck Join Date: Apr 2007 Location: M-Pan, NJ Posts: 2,556 iTrader: 4 reviews	im bumpin this shit cuz i wanna see some strong sixers here!! __________________ 99 V6 Mustang-sold 02 Ford Focus-sold 98 Camaro Z/28-lid, catback

June 28th, 2008, 04:45 PM	#14
plove71387 Regular 2004 Mustang V6 Vert. 328/419 @ 4000 rpms Join Date: Oct 2007 Posts: 476 iTrader: 0 reviews	sigh, i dont have any pictures of under the hood shots of my car only cause its in the shop. . . should have it back in a week or so, ill post pictures tehn with all my mods.

June 28th, 2008, 04:58 PM	#15
ByPopularDemand Hardcore Enthusiast 2000 V6 Join Date: Jan 2007 Location: Albuquerque Posts: 2,666 iTrader: 0 reviews	My performance mods are in my sig...too bad I cant snap a few shots of the stang tho...I didnt drive it today __________________ 2000 V6 vert Mac LT headers, Mac O/R H-pipe, Mac CAI, ASP 25% underdrive pulley(r.i.p), SCT tune, 8.8 rear and 4.10 gears.

June 28th, 2008, 06:31 PM	#17
ESG-642T [8MINUS2] 2002, Ford, v6 Join Date: Feb 2007 Location: TEXAS Posts: 12,319 iTrader: 0 reviews	Performance: Vortech V1 S trim supercharger 3.12 pulley Gates 111.5" belt Mac Long Tube Headers Mac Pro Chamber Flowmaster original 40 mufflers Fuel 03 cobra 39/42lb fuel injectors 310lph fuel pump Driveline Eaton Traction Lock Motive 3.73 gears Misc Xcal LiveWire Screamin Demon Coil "livewires" spark plug wires NGK Tr6 gapped .030 plugs PCV / EGR delete Results 7.5 psi: Made 255/273 SAE-5 with a spark/imrc issue. __________________ Hi, You can call me Kyle Random ESG fact: Had a prochamber on his v6 before it was popular. WTB: v6 BBK valve covers

June 28th, 2008, 06:53 PM	#18
WLJohnson05 MM's Database Error 2004 Mustang V6 322.8 rwhp Join Date: Mar 2007 Location: VA Posts: 13,285 iTrader: 9 reviews	PERFORMANCE MODS: -Windstar upper intake -EGR delete -IAC relocation plate -Precision Garrett GT4088 .72 turbine a/r -Tial 38 mm wastegate - 7.2 psi (3.6psi spring in right now) -HKS Bov -16 guage mild steel log headers - 1.5" primaries with 2 1/8" log headers merged into a T4 turbine -3" mild steel single exhaust dump - single 3" exhaust dump pipe routing to underneath the car then through a 3" Magnaflow muffler that dumps right before the axle -OBX Intercooler -K &N Filter -44# injectors -310 LP fuel pump (not installed yet) -SCT BigAir2800 MAF -Sniper Tune -Jmod valve body swap -Eibach Pro Kit -Innovate LC-1 Wideband -T-Lok (not installed yet) VISUAL / JUST FOR FUN MODS: interior neons (blue) engine neon (blue) underglow neon (blue) mach2 hood billet hvac controls shorty antenna mod grille neons (blue) trunk neons (blue) push button start black horse, srs, horn, script on dash and steering wheel third brake light overlay "JOHNSON" rocker panel stripes "MUSTANG" rear bumper letters "MUSTANG" door handle horse decals Kenwood KDC-x790 head unit Kenwood 1800 amp 10" Audiobahn Subwoofer 18" Mach1 chrome with black wheels Custom Built Rear Seat Delete (UNDER CONSTRUCTION) Custom Sub Box (UNDER CONSTRUCTION) roush grille custom designed gauges center console switch panel custom built fiberglass switch panel for bass booster, amp turn on, and underglow __________________ I'm trying to get rid of this stuff, feel free to make me an offer!: SCT Mass Air Flow Sensor $200 Tial Wastegate Springs $40 (10psi and 3.6psi)

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: 6/22/08 (v6) Underhood / Mods Thread
Thread	Thread Starter	Forum	Replies	Last Post
99/01 Cobra and 03/04 Mach 1 FACTS, and Basic Mods thread	KingChronic	4V / SVT	84	May 12th, 2012 10:03 AM
Underhood Liner?	06z28eaTer	99-04	24	May 17th, 2008 04:43 PM
What mods to do first on 4.0 thread!	MustanG_guy17	2005 - 2010 V6	5	May 4th, 2008 12:28 AM
what mods? my other thread got moved......	Black02GT	99-04	12	October 16th, 2007 10:05 PM
Underhood Shine	Lykwidd40	Visual	5	March 7th, 2006 05:00 PM

All times are GMT -4. The time now is 03:54 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.