GT Bumper On V6

November 9th, 2006, 11:35 PM	#1
Vendetta Regular Join Date: Nov 2006 Location: CT Posts: 102	GT Bumper On V6 I want a dual exhaust for my 07 V6. But I need a rear GT bumper for the clearence. Has anyone evr done this mod before? If so where did you get the rear GT bumper?

November 9th, 2006, 11:47 PM	#2
Youngin Hip Hop Artist 2007 Mustang v6 11.47@120.58 Join Date: Nov 2006 Location: Californ-i-A Posts: 3,547	im going for the same thing im just gonna shave it a bit __________________ http://www.myspace.com/moddedmustangz Modded Mustang's Song Song #2 In Teh Werkz

November 10th, 2006, 12:02 AM	#3
itschristorres8 SP00LIN V6 2000 Mustang V6 unknown @390 Join Date: Aug 2006 Location: south florida Posts: 14,619	junk yard...or look through online...its not a hard install at all...its bolt on basically __________________ 437rwhp and 402rwtq through a V6 on a stock bottom end

November 10th, 2006, 12:40 AM	#4
Youngin Hip Hop Artist 2007 Mustang v6 11.47@120.58 Join Date: Nov 2006 Location: Californ-i-A Posts: 3,547	ya that works too ... junkyard for a 07 peice? __________________ http://www.myspace.com/moddedmustangz Modded Mustang's Song Song #2 In Teh Werkz

November 10th, 2006, 12:48 AM

itschristorres8

SP00LIN V6

2000 Mustang V6

unknown @390

Join Date: Aug 2006

Location: south florida

Posts: 14,619

Originally Posted by Youngin

ya that works too ... junkyard for a 07 peice?

lol its possible..but i wouldnt waste the time to look. just cut the whole...it isnt to hard

__________________

437rwhp and 402rwtq through a V6 on a stock bottom end

November 10th, 2006, 01:02 AM	#6
Roadhawg Regular Join Date: Dec 2005 Location: Chesapeake, VA Posts: 429	Try Saleen ....................... They have super low prices on GT take off items and you can get them by color. __________________ 2003 Mustang Mach1 1995 Thunderbird LX 4.6; 4R70W w/Jmod, 8.8 3.27 Tracloc 1995 Mustang 4.2; MPX Supercharger/25%OD, 4R70W w/Jmod, 8.8 3.73 Tracloc (343rwhp/420rwtq)

November 10th, 2006, 10:54 AM	#7
Vendetta Regular Join Date: Nov 2006 Location: CT Posts: 102	I want it too look good tho...i dont want just some crappy whole on the other side, i was thinking maybe i could go to the dealer and get it done? __________________ -mustang is a way of life...so buckle up

November 10th, 2006, 11:08 AM	#8
HMUSN Doc 91 Sonic Blue Goodness 19.83 @ 12mph Join Date: Nov 2006 Location: NJ Posts: 27,311	noo never go to the stealership.. just go on ebay edited by ab99 for page break link

November 10th, 2006, 02:13 PM	#9
PureVolume707 Regular Join Date: Sep 2006 Location: Raleigh, NC Posts: 85	you might find one on mustangsunlimited.com

November 10th, 2006, 02:55 PM	#10
Vendetta Regular Join Date: Nov 2006 Location: CT Posts: 102	Thanx for the suggestions guys, it really helps. Do you think it is really worth trying to put a dual exhaust on? or should i just work with the one? __________________ -mustang is a way of life...so buckle up

November 10th, 2006, 04:45 PM

#11

shamdoodie

Regular

2000 V6

Join Date: Sep 2006

Posts: 69

Originally Posted by Vendetta

Thanx for the suggestions guys, it really helps. Do you think it is really worth trying to put a dual exhaust on? or should i just work with the one?

Do dual

second mod i ever did on mine, and my favorite by far... granted mine is only a 2000 and i just went with GT takeoffs with an aftermarket no-cat xpipe, but i love it much more than the original one-exit system.

November 10th, 2006, 06:54 PM	#12
itschristorres8 SP00LIN V6 2000 Mustang V6 unknown @390 Join Date: Aug 2006 Location: south florida Posts: 14,619	if you cut the hole right you wont even notice....the muffler shop i went to did that to an 05 v6 bumper and it looked fine, its not hard. __________________ 437rwhp and 402rwtq through a V6 on a stock bottom end

November 11th, 2006, 10:16 AM	#13
Vendetta Regular Join Date: Nov 2006 Location: CT Posts: 102	Ya im considering just cutting the whole now. I want a dual cuz i want to be different then all the other little slippery dicks in the world with a V6 __________________ -mustang is a way of life...so buckle up

November 11th, 2006, 12:13 PM

#14

CyberPrey

Regular

Join Date: Oct 2006

Posts: 333

Originally Posted by Vendetta

Ya im considering just cutting the whole now. I want a dual cuz i want to be different then all the other little slippery dicks in the world with a V6

You won't be... Dual's is basically one of the first mod's almost every mustang V6 in the MN area gets....

November 11th, 2006, 12:44 PM

#15

itschristorres8

SP00LIN V6

2000 Mustang V6

unknown @390

Join Date: Aug 2006

Location: south florida

Posts: 14,619

Originally Posted by CyberPrey

Originally Posted by Vendetta

Ya im considering just cutting the whole now. I want a dual cuz i want to be different then all the other little slippery dicks in the world with a V6

You won't be... Dual's is basically one of the first mod's almost every mustang V6 in the MN area gets....

true. if someone mods there V6 garuntee they have CAI or exhaust first

__________________

437rwhp and 402rwtq through a V6 on a stock bottom end

November 11th, 2006, 07:27 PM	#16
Vendetta Regular Join Date: Nov 2006 Location: CT Posts: 102	Ya I guess. And I have officaly decided to just cut the whole myself. At a second look see that the rear fascias tuck back in towards the body and u honestly cannot tell. if i did the worst cut out job ever...it would look like a million bucks. __________________ -mustang is a way of life...so buckle up

November 11th, 2006, 09:03 PM

#17

XxViSiOnxX

Regular

06 Satin Silver V6

9.685 @ 71.73 1/8th mile

Join Date: Oct 2006

Location: WhiTTiEr Cali

Posts: 250

Originally Posted by itschristorres8

if you cut the hole right you wont even notice....the muffler shop i went to did that to an 05 v6 bumper and it looked fine, its not hard.

have you really looked closely to the manufactured cut out its molded and has a little lip on it if you cut out for a dual exhaust for lack of better words it looks like shyt because theres no lip and its flat so i would try and get a dual exhaus bumper manufactured and a GT bumper will not fit on a V6 the mounting points are not the Same..!!

__________________
MODS: K&N Intake, Dual Exhaust Flowmaster's,
T5 Billet ,Sequential Tail Lights
20" Kyowa R Wheels W/Toyo Proxie 4's,
Eibach Pro-Kit Lowering Springs,TruFiber GT-S III Ram Air Hood.
Coming Soon: 3.73 gears w/t-lok

November 12th, 2006, 01:59 AM

#18

itschristorres8

SP00LIN V6

2000 Mustang V6

unknown @390

Join Date: Aug 2006

Location: south florida

Posts: 14,619

Originally Posted by XxViSiOnxX

Originally Posted by itschristorres8

if you cut the hole right you wont even notice....the muffler shop i went to did that to an 05 v6 bumper and it looked fine, its not hard.

have you really looked closely to the manufactured cut out its molded and has a little lip on it if you cut out for a dual exhaust for lack of better words it looks like shyt because theres no lip and its flat so i would try and get a dual exhaus bumper manufactured and a GT bumper will not fit on a V6 the mounting points are not the Same..!!

for that lil lip its not worth it...no one will notice really

__________________

437rwhp and 402rwtq through a V6 on a stock bottom end

November 12th, 2006, 03:28 AM	#19
XxViSiOnxX Regular 06 Satin Silver V6 9.685 @ 71.73 1/8th mile Join Date: Oct 2006 Location: WhiTTiEr Cali Posts: 250	well i guess i have a different opinion ive seen exactly what your saying on others who have cut out the bumper for dual and to me it just looks tacky, that is one of the main reasons i have not done mine because i dont want to cut the bumper if i can find a dual exhaust manufactured i would go that way but if you wanna go with the cut out then hey go for it its up to the owner __________________ MODS: K&N Intake, Dual Exhaust Flowmaster's, T5 Billet ,Sequential Tail Lights 20" Kyowa R Wheels W/Toyo Proxie 4's, Eibach Pro-Kit Lowering Springs,TruFiber GT-S III Ram Air Hood. Coming Soon: 3.73 gears w/t-lok

November 12th, 2006, 06:17 AM	#20
Youngin Hip Hop Artist 2007 Mustang v6 11.47@120.58 Join Date: Nov 2006 Location: Californ-i-A Posts: 3,547	shave it!!!! hey hey hey as long as it adds power!!! __________________ http://www.myspace.com/moddedmustangz Modded Mustang's Song Song #2 In Teh Werkz

Threads Similar to: GT Bumper On V6
Thread	Thread Starter	Forum	Replies	Last Post
GT Bumper For V6 Bumper Swap	Xantho99	Trade	2	November 9th, 2007 08:58 PM
bumper or bumper cover?	94stallion	Visual	3	October 17th, 2007 07:59 PM
LMAO bumper..... or no bumper?	Invictus	Videos	13	July 15th, 2007 02:21 AM
Roush Bumper For Your GT Bumper and Cash	matrixpuba	Trade	22	April 17th, 2007 08:59 PM
Stock GT Bumper For Cobra Bumper Fog Light Question	droppedbass87	Electronics	5	October 1st, 2006 06:38 AM

All times are GMT -4. The time now is 03:49 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.