Rear Deck Speaker Install

King Mustang · November 11th, 2006, 10:26 PM

i changed my front door speakers now i want to change the rear deck speakers. i just have no clue how to get back there. i need help!!!

CyberPrey · November 11th, 2006, 10:32 PM

What year?

with my '97, I simply open the trunk, remove a bit of covering and there they are....

King Mustang · November 11th, 2006, 10:33 PM

mine is a 94. but its also a convertable.

lcurle · November 11th, 2006, 11:26 PM

You have to take the rear deck matting off and then disconnect the speakers and un install them via the bottom. Reinstalling is from the top concidering they are 5x7's which is a off size these days. Match up the + and - correctly and you should be set.

kerry · November 12th, 2006, 01:49 AM

i have a 94 and thats exactly what i did except then i cut holes in the deck because i didnt think spending money on expensive speakers made sense if it was just going to get muffled by the deck lid. after i cut the holes i found a pair of 4 in' speaker grills over it. looks slick and i belive it transfers a lil more sound.

lcurle · November 12th, 2006, 04:32 PM

the deck has holes in it to allow sound to come through. What I did was installed 5x7's in the rear deck then cut out a 5x7 hole on the lid, and layed new carpet over that, two tone to match the interior of my car.

scubasteve041186 · November 12th, 2006, 08:20 PM

i wanna see that two tone in the back lid.

lcurle · November 12th, 2006, 09:10 PM

sure not a problem, once I get off work tomorrow and there is some light outside I will be happy to take some pictures of it for you.

I also junked the rear seats and made a rear seat delete where under it I have mounted with a false floor my two amps and cap. All the wires are running under the false floor to their respective locations.

Youngin · November 13th, 2006, 06:02 AM

you gonna get some amps too bud?

November 11th, 2006, 10:26 PM	#1
King Mustang Regular Join Date: Jun 2006 Posts: 74	Rear Deck Speaker Install i changed my front door speakers now i want to change the rear deck speakers. i just have no clue how to get back there. i need help!!!

November 11th, 2006, 11:26 PM	#4
lcurle Newbie Join Date: Nov 2006 Location: Kansas Posts: 48	You have to take the rear deck matting off and then disconnect the speakers and un install them via the bottom. Reinstalling is from the top concidering they are 5x7's which is a off size these days. Match up the + and - correctly and you should be set. __________________ Lee ATI,CAI, 1 5/8th" Headers, Dynomax dual exhaust(Turn Downs pre-axle), SCT Chip, Cut Springs (2"Front 1 1/2"Rear), FR 9mm wires, Ram Air, 78mm MAH, EGR delete, Rear Sway bar,Sub-Frame Connectors.

November 12th, 2006, 04:32 PM	#6
lcurle Newbie Join Date: Nov 2006 Location: Kansas Posts: 48	the deck has holes in it to allow sound to come through. What I did was installed 5x7's in the rear deck then cut out a 5x7 hole on the lid, and layed new carpet over that, two tone to match the interior of my car. __________________ Lee ATI,CAI, 1 5/8th" Headers, Dynomax dual exhaust(Turn Downs pre-axle), SCT Chip, Cut Springs (2"Front 1 1/2"Rear), FR 9mm wires, Ram Air, 78mm MAH, EGR delete, Rear Sway bar,Sub-Frame Connectors.

November 12th, 2006, 09:10 PM	#8
lcurle Newbie Join Date: Nov 2006 Location: Kansas Posts: 48	sure not a problem, once I get off work tomorrow and there is some light outside I will be happy to take some pictures of it for you. I also junked the rear seats and made a rear seat delete where under it I have mounted with a false floor my two amps and cap. All the wires are running under the false floor to their respective locations. __________________ Lee ATI,CAI, 1 5/8th" Headers, Dynomax dual exhaust(Turn Downs pre-axle), SCT Chip, Cut Springs (2"Front 1 1/2"Rear), FR 9mm wires, Ram Air, 78mm MAH, EGR delete, Rear Sway bar,Sub-Frame Connectors.

November 13th, 2006, 06:02 AM	#9
Youngin Hip Hop Artist 2007 Mustang v6 11.47@120.58 Join Date: Nov 2006 Location: Californ-i-A Posts: 3,641	you gonna get some amps too bud? __________________ http://www.myspace.com/moddedmustangz Modded Mustang's Song Song #2 In Teh Werkz If You Feel That My Post Was Helpful in Anyway , Don't Thank Me ... Rep Me

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

November 11th, 2006, 10:32 PM	#2
CyberPrey Regular Join Date: Oct 2006 Posts: 333	What year? with my '97, I simply open the trunk, remove a bit of covering and there they are....

November 11th, 2006, 10:33 PM	#3
King Mustang Regular Join Date: Jun 2006 Posts: 74	mine is a 94. but its also a convertable.

November 12th, 2006, 01:49 AM	#5
kerry Regular Join Date: Aug 2006 Posts: 485	i have a 94 and thats exactly what i did except then i cut holes in the deck because i didnt think spending money on expensive speakers made sense if it was just going to get muffled by the deck lid. after i cut the holes i found a pair of 4 in' speaker grills over it. looks slick and i belive it transfers a lil more sound.

November 12th, 2006, 08:20 PM	#7
scubasteve041186 Hardcore Enthusiast 2004 mustang 40th annv. Join Date: Sep 2006 Location: kelowna,BC, Canada Posts: 1,384	i wanna see that two tone in the back lid.

Threads Similar to: Rear Deck Speaker Install
Thread	Thread Starter	Forum	Replies	Last Post
Rear Speaker Install	truemustang	Electronics	5	July 23rd, 2007 07:11 PM
fiberglass rear deck lid?	impetus	2005+	3	July 14th, 2007 09:52 AM
06GT speaker install help	acehogg69	2005+	2	April 14th, 2007 12:12 PM
mounting 10" kickers on rear deck?	GTstangB.F.D.M.	2005+	7	April 2nd, 2007 04:41 PM
rear bumper install	BlackIce	V6 Mustangs	3	December 28th, 2006 05:26 AM

All times are GMT -4. The time now is 02:29 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.