Can I haz Turbo?

poindexter18 · July 1st, 2008, 05:31 PM

So question. I want input on the differences in boost build between the .68 turbine a/r and the .81 turbine a/r. I know the .81 starts to build at 2600 RPMs but I feel like that might be a tad late and was wondering if, perhaps, the .68 would be a better route. Woody and Torres if you have any personal input that would be awesome. I know woody is running a, what, .54 right? And Chris I couldn't find what you were running.

I want to get this info so I can start getting some stuff in the makes with TMA. (I'm crossing my fingers that I won't have to go somewhere else)

So yeah.

-poindexter-

p.s. rims come in today. /excited

HMUSN · July 1st, 2008, 05:33 PM

sure. here ya go.

poindexter18 · July 1st, 2008, 06:23 PM

... thanks clown boy.

Very helpful. I'm set now.

Rofl.

ESG-642T · July 1st, 2008, 07:40 PM

Originally Posted by poindexter18

So question. I want input on the differences in boost build between the .68 turbine a/r and the .81 turbine a/r. I know the .81 starts to build at 2600 RPMs but I feel like that might be a tad late and was wondering if, perhaps, the .68 would be a better route. Woody and Torres if you have any personal input that would be awesome. I know woody is running a, what, .54 right? And Chris I couldn't find what you were running.

I want to get this info so I can start getting some stuff in the makes with TMA. (I'm crossing my fingers that I won't have to go somewhere else)

So yeah.

-poindexter-

p.s. rims come in today. /excited

It MIGHT help if you tell us what turbo your looking at... .58 a/r on a t3 and .58 a/r on a 101mm turbonetics would have different effects ya know?

GreenFaleen · July 1st, 2008, 07:44 PM

well he is wanting to work with TMA and he uses garrett doesnt he

mustang1072 · July 1st, 2008, 10:10 PM

Originally Posted by HMUSN

sure. here ya go.

+1

itschristorres8 · July 1st, 2008, 11:07 PM

im running .68 a/r for the compressor and turbine
i hit full boost at about 2600-2800

G.T. Rags · July 1st, 2008, 11:11 PM

Originally Posted by HMUSN

sure. here ya go.

i just threw up a lil bit in thw back of my mouth

Cricket · July 2nd, 2008, 12:14 AM

hitting boost at 2600 isnt that late. When your shifting you shouldnt be going below that so you only have to worry about 1st gear. You will be fine. Also what type of turbo are you talkin about like sss said.

WLJohnson05 · July 2nd, 2008, 12:26 AM

Precision Garrett GT4088 .72 turbine a/r

thas what i have...ppl say its too big, but i have seen it in action and that car got up and went pretty fast to me

ESG-642T · July 2nd, 2008, 12:34 AM

Originally Posted by WLJohnson05

Precision Garrett GT4088 .72 turbine a/r

thas what i have...ppl say its too big, but i have seen it in action and that car got up and went pretty fast to me

Sounds like a late spooler...

WLJohnson05 · July 2nd, 2008, 12:39 AM

Originally Posted by SSStang

Sounds like a late spooler...

it was on a single port and it got goin in a hurry when i rode in it

poindexter18 · July 2nd, 2008, 04:46 AM

Originally Posted by itschristorres8

im running .68 a/r for the compressor and turbine
i hit full boost at about 2600-2800

Thanks Chris. That pretty much answers what I was looking for.

Oh, and make the split port swap again plzkthx. LoL

-poindexter-

obdnanr · July 2nd, 2008, 01:39 PM

poindexter18 · July 2nd, 2008, 01:58 PM

I r fat and haz pimples.

=(

IRL frendz cant happin. =(

-poindexter-

July 1st, 2008, 05:31 PM	#1
poindexter18 Regular '95 mustang sixer Shrugs Join Date: May 2007 Location: Everett, WA Posts: 214 iTrader: 0 reviews	Can I haz Turbo? So question. I want input on the differences in boost build between the .68 turbine a/r and the .81 turbine a/r. I know the .81 starts to build at 2600 RPMs but I feel like that might be a tad late and was wondering if, perhaps, the .68 would be a better route. Woody and Torres if you have any personal input that would be awesome. I know woody is running a, what, .54 right? And Chris I couldn't find what you were running. I want to get this info so I can start getting some stuff in the makes with TMA. (I'm crossing my fingers that I won't have to go somewhere else) So yeah. -poindexter- p.s. rims come in today. /excited __________________ License Plate says it all.

July 1st, 2008, 05:33 PM	#2
HMUSN Doc 1986 SVO 48.47@ 12.58 Join Date: Nov 2006 Posts: 37,050 iTrader: 11 reviews	sure. here ya go. __________________

July 1st, 2008, 06:23 PM	#3
poindexter18 Regular '95 mustang sixer Shrugs Join Date: May 2007 Location: Everett, WA Posts: 214 iTrader: 0 reviews	... thanks clown boy. Very helpful. I'm set now. Rofl. __________________ License Plate says it all.

July 1st, 2008, 07:44 PM	#5
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,880 Blog Entries: 2 iTrader: 1 reviews	well he is wanting to work with TMA and he uses garrett doesnt he __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

July 1st, 2008, 11:07 PM	#7
itschristorres8 Banned 00 V6 & 09 GT 13.37@104.4mph--BONE stock GT Join Date: Aug 2006 Location: south florida Posts: 15,806 iTrader: 2 reviews	im running .68 a/r for the compressor and turbine i hit full boost at about 2600-2800 __________________ [SIGPIC][/SIGPIC] Acmillr loves me

July 2nd, 2008, 12:26 AM	#10
WLJohnson05 MM's Database Error 2004 Mustang V6 322.8 rwhp Join Date: Mar 2007 Location: VA Posts: 13,285 iTrader: 9 reviews	Precision Garrett GT4088 .72 turbine a/r thas what i have...ppl say its too big, but i have seen it in action and that car got up and went pretty fast to me __________________ I'm trying to get rid of this stuff, feel free to make me an offer!: SCT Mass Air Flow Sensor $200 Tial Wastegate Springs $40 (10psi and 3.6psi)

July 2nd, 2008, 01:39 PM	#14
obdnanr Hardcore Enthusiast 2003 v6 340/373 - yay for belts Join Date: Nov 2007 Location: around Posts: 1,764 iTrader: 0 reviews	__________________ 4.2L, gforce t5, 8.8, d1sc, other shit. stang is down

July 2nd, 2008, 01:58 PM	#15
poindexter18 Regular '95 mustang sixer Shrugs Join Date: May 2007 Location: Everett, WA Posts: 214 iTrader: 0 reviews	I r fat and haz pimples. =( IRL frendz cant happin. =( -poindexter- __________________ License Plate says it all.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Can I haz Turbo?
Thread	Thread Starter	Forum	Replies	Last Post
Turbo timers and Boost Controllers? Turbo guys where you at?	95StangSVT	General Tech	14	July 11th, 2008 07:01 AM
Supercharger, Twin Turbo, and Single Turbo	justinsstang	General Tech	24	March 7th, 2007 09:07 PM
Mellon's Twin Turbo Stealth vs Wills99z's Single Turbo z28	Mellon	Videos	10	December 30th, 2006 10:05 AM
Turbo, Twin Turbo, Procharger, or Kennebell?	black94gt	5.0 Mustangs	19	October 7th, 2006 10:41 AM
Super Charger vs Turbo/Twin Turbo: Pros and Cons of each	FireryDriver	2005 - 2010	9	September 17th, 2006 04:15 PM

All times are GMT -4. The time now is 03:55 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.