key less entry

natedawgishot · August 4th, 2008, 03:17 PM

hello every1

I just bought a 2004 v6 mustang and it has the cool key less entry with the numbers on the side...only problem is i have no idea how it works and i dont have the owners manual.does any1 know how i can set it or rest it? thanks guys

commandersafi · August 4th, 2008, 03:22 PM

Wait...you have that little keypad on your 'stang that you see on the old peoples cars?

JTS · August 4th, 2008, 03:23 PM

Originally Posted by natedawgishot

hello every1

I just bought a 2004 v6 mustang and it has the cool key less entry with the numbers on the side...only problem is i have no idea how it works and i dont have the owners manual.does any1 know how i can set it or rest it? thanks guys

Let me call my friend up who has the keyless entry on his car ill be back on once i find out

natedawgishot · August 4th, 2008, 03:26 PM

yes i do

natedawgishot · August 4th, 2008, 03:27 PM

and thanks JTS

GreenFaleen · August 4th, 2008, 05:30 PM

I didnt even know you could get that on mustangs, but if it has ever been programmed I think ford has to reset it

Modified88Dreamer · August 4th, 2008, 05:47 PM

If I remember correctly, all that you have to do is cycle the key 8 times leaving the ignition in the on position when the door locks cycle. Hit the lock button on the remote and the lock button on the other one (if you have two). After you've done that I believe you can hit any button on the pad to activate it and then put your 5 digit code in. Cycling the key should reset any code the pad has stored for use with a new one. Also if it works and lets say for instance, the battery dies in your remote reciever you can hit 7-8 and 9-0 at the same time to lock the doors. It'll work with any factory pad and 3-4 if hit should pop open the trunk.

natedawgishot · August 5th, 2008, 03:13 AM

what do you mean by

cycle the key 8 times leaving the ignition in the on position

cycle what how?

scubasteve041186 · August 5th, 2008, 03:32 AM

put the key in the ignition and turn it to the on position, without starting the engine. meaning everything lights up, your gauages and stereo turns on and blah blah. thats what he means. didnt; knwo that worked for the key pads as well. good info thought that was only for the fobs

natedawgishot · August 5th, 2008, 03:36 AM

yeah that didnt work

04DSGV6 · August 5th, 2008, 02:34 PM

That pad sounds aftermarket to me. I would take it to an alarm shop that deals with those keyless entry pads and see if they can help you.

Modified88Dreamer · August 5th, 2008, 03:33 PM

Originally Posted by scubasteve041186

put the key in the ignition and turn it to the on position, without starting the engine. meaning everything lights up, your gauages and stereo turns on and blah blah. thats what he means. didnt; knwo that worked for the key pads as well. good info thought that was only for the fobs

If its from Ford

Originally Posted by natedawgishot

yeah that didnt work

Probably aftermarket which was just mentioned. Did the door locks cycle up and down after cycling the ignition 8 times? What I forgot to mention was after you cycle the key, the locks cycle and you put in a 5 digit code, to turn the ignition in the off position to exit the programming

natedawgishot · August 6th, 2008, 04:41 AM

there we go now it works....yay...and no its stock they put that upgrade in the 40th anniversary ones...dont ask me why and i have a 3.9 baby lol

JMack · August 6th, 2008, 07:36 AM

yeah, I've seen that on a handful of 04's.

It was kind of rare I think, also a little wierd, but neat at the same time.

Do you like it?

Modified88Dreamer · August 6th, 2008, 09:28 AM

Originally Posted by natedawgishot

there we go now it works....yay...and no its stock they put that upgrade in the 40th anniversary ones...dont ask me why and i have a 3.9 baby lol

What did you try differently this time?

August 4th, 2008, 03:17 PM	#1
natedawgishot Regular Join Date: Sep 2007 Posts: 119	key less entry hello every1 I just bought a 2004 v6 mustang and it has the cool key less entry with the numbers on the side...only problem is i have no idea how it works and i dont have the owners manual.does any1 know how i can set it or rest it? thanks guys __________________ 2000 gt convert and a 2001 v6

August 4th, 2008, 03:26 PM	#4
natedawgishot Regular Join Date: Sep 2007 Posts: 119	yes i do __________________ 2000 gt convert and a 2001 v6

August 4th, 2008, 03:27 PM	#5
natedawgishot Regular Join Date: Sep 2007 Posts: 119	and thanks JTS __________________ 2000 gt convert and a 2001 v6

August 4th, 2008, 05:30 PM	#6
GreenFaleen Resident MM Ricer 2006 Scion tC 13.9@103/8.9@81 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,435	I didnt even know you could get that on mustangs, but if it has ever been programmed I think ford has to reset it __________________ Scion Tc-strup racing header, CAI, Ground Kit, NOS 100shot, Custom suspension, Doc. I 50% STS MM 4 Banger club: Senior Ricer "Horsepower sells cars, torque wins races." -Carroll Shelby Thanks To My Sponsors: Strup Performance

August 4th, 2008, 05:47 PM	#7
Modified88Dreamer Enthusiast Nowhere to be found Join Date: Nov 2006 Location: Moving back home to Florida Posts: 630	If I remember correctly, all that you have to do is cycle the key 8 times leaving the ignition in the on position when the door locks cycle. Hit the lock button on the remote and the lock button on the other one (if you have two). After you've done that I believe you can hit any button on the pad to activate it and then put your 5 digit code in. Cycling the key should reset any code the pad has stored for use with a new one. Also if it works and lets say for instance, the battery dies in your remote reciever you can hit 7-8 and 9-0 at the same time to lock the doors. It'll work with any factory pad and 3-4 if hit should pop open the trunk. __________________ Well, guys its been real and its been fun, but it hasn't been real fun for me the past 3 months. Money has been tight and need to cancel my cable service to save what I can. I hope to chat with ya'll in 6-7 months from now. Bye! Last edited by Modified88Dreamer : August 4th, 2008 at 05:51 PM.

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

August 4th, 2008, 03:22 PM	#2
commandersafi Banned 2000 v6 Mustang Join Date: Apr 2008 Location: Houston, TX Posts: 340	Wait...you have that little keypad on your 'stang that you see on the old peoples cars?

August 5th, 2008, 03:13 AM	#8
natedawgishot Regular Join Date: Sep 2007 Posts: 119	what do you mean by cycle the key 8 times leaving the ignition in the on position cycle what how? __________________ 2000 gt convert and a 2001 v6

August 5th, 2008, 03:32 AM	#9
scubasteve041186 Hardcore Enthusiast 2004 mustang 40th annv. Join Date: Sep 2006 Location: kelowna,BC, Canada Posts: 1,384	put the key in the ignition and turn it to the on position, without starting the engine. meaning everything lights up, your gauages and stereo turns on and blah blah. thats what he means. didnt; knwo that worked for the key pads as well. good info thought that was only for the fobs

August 5th, 2008, 03:36 AM	#10
natedawgishot Regular Join Date: Sep 2007 Posts: 119	yeah that didnt work __________________ 2000 gt convert and a 2001 v6

August 6th, 2008, 04:41 AM	#13
natedawgishot Regular Join Date: Sep 2007 Posts: 119	there we go now it works....yay...and no its stock they put that upgrade in the 40th anniversary ones...dont ask me why and i have a 3.9 baby lol __________________ 2000 gt convert and a 2001 v6 Last edited by natedawgishot : August 6th, 2008 at 04:41 AM. Reason: typo

August 6th, 2008, 07:36 AM	#14
JMack Regular 2000 V-6 Join Date: Jul 2008 Location: Central Ohio Posts: 109	yeah, I've seen that on a handful of 04's. It was kind of rare I think, also a little wierd, but neat at the same time. Do you like it?

Threads Similar to: key less entry
Thread	Thread Starter	Forum	Replies	Last Post
keyless entry	dr.gonzo	5.0 Mustangs	7	June 20th, 2008 01:11 PM
keypad entry	98SilverStang	99-04	10	April 30th, 2008 10:22 PM
remote entry help	99 gt	99-04	23	August 19th, 2007 12:33 PM
Keyless entry and more	trueballerisme	Electronics	11	December 24th, 2006 01:05 AM
Broken Key Cylinder removal - Key will not turn, Ideas?	Murago	5.0 Mustangs	6	June 21st, 2006 11:35 PM

All times are GMT -4. The time now is 03:34 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.