Twin turbo setup?

TOOLinYourFace · November 16th, 2008, 04:34 PM

What would I have to do to my 00' v6 to be able to run a twin turbo setup?... I was also thinking about gettin a Windstar down the road so...

GreenFaleen · November 16th, 2008, 04:48 PM

buy a twin turbo kit and a tuner

TOOLinYourFace · November 16th, 2008, 05:25 PM

even on a stock 3.8? just a TT and a tuner..

96gtstang&V6 · November 16th, 2008, 05:40 PM

yeah just dont run alot of boost

WLJohnson05 · November 16th, 2008, 05:53 PM

the turbo kit
new maf
new injectors
new fuel pump
dyno tune
and if ur doing the windstar u need a modified intake pipe

94v6blkndred · November 16th, 2008, 07:59 PM

make it worth it and build your motor.....just IMO

WLJohnson05 · November 16th, 2008, 08:52 PM

Originally Posted by 94v6blkndred

make it worth it and build your motor.....just IMO

+1

not really using the most of the TT if ur only runnin like 4psi to each turbo...

dgt_mustang · November 16th, 2008, 08:53 PM

forged internals and built rear end, making a good bit of power your gonna want to be able to transfer to the pavement.

04mustang232 · November 16th, 2008, 10:27 PM

a tt isnt something that you just do. It takes alot of supporting mods to make it even worth it. Pretty much everything ^^^said above combined.

TOOLinYourFace · November 16th, 2008, 11:02 PM

well... i have a list of things im getting over the next few months.. ie. windstar, 4.10 gears, tuner... american muscle has a nice deal on the gears with a sct livewire tuner

Onemanzu · November 17th, 2008, 12:40 AM

not worth it, go with single. or go big and rebuild the engine.

94v6blkndred · November 18th, 2008, 11:27 PM

Originally Posted by TOOLinYourFace

well... i have a list of things im getting over the next few months.. ie. windstar, 4.10 gears, tuner... american muscle has a nice deal on the gears with a sct livewire tuner

not to mention gears,windstar,and a tuner wont do shit to really help with the problem your gonna have...not to mention the tuner..unless your gonna but advantage 3 program and fine tune it yourself your not gonna get the best results from a standard tune they put on those things....gears and the windstar arent gonna give you anymore room to run anything that 5psi on each turbo to be safe...like was stated...if you wanna just throw a turbo on just go single turbo..but even then might as well make it worth it and build the motor...

stangcharger · November 19th, 2008, 12:40 PM

ehh run 340-350rwhp on stock internals until it goes. no use building the motor if that or under is all you want.\

and dont put in gears with a turbo. use the stock gearing or 3.55 gears. the turbo likes the stress on it, and makes full boost lower than a centri, so gearis arent needed.

04mustang232 · November 19th, 2008, 02:39 PM

But at least put in a tloc. 350 hp aint shit if your roasting one wheel.

blakehunter316 · November 20th, 2008, 11:38 PM

This guy that lives close to me did a head cam intake job on his v6 and ran a single turbo with some hardcore boost and he is planning on putting down 550 horse. I've seen it together and holy crap. Yea I believe it pushes over 500. But my point here is u don't need a tt setup really IMO. Single on a built motor or hel just do a hci.

TOOLinYourFace · November 21st, 2008, 12:09 AM

so pretty much, go with the single cuz if i get the twin im not going to be able to use its full power without doing a bunch of other shit and really wont be worth it in the end?

WLJohnson05 · November 21st, 2008, 01:01 AM

Originally Posted by TOOLinYourFace

so pretty much, go with the single cuz if i get the twin im not going to be able to use its full power without doing a bunch of other shit and really wont be worth it in the end?

exactly and u will still make plenty power on a single turbo setup

itschristorres8 · November 21st, 2008, 01:13 AM

Originally Posted by blakehunter316

This guy that lives close to me did a head cam intake job on his v6 and ran a single turbo with some hardcore boost and he is planning on putting down 550 horse. I've seen it together and holy crap. Yea I believe it pushes over 500. But my point here is u don't need a tt setup really IMO. Single on a built motor or hel just do a hci.

yeah heck theres a guy on the site with that making 437rwhp and 402rwtq on a single turbo setup!
TMA ftw! tons of kits avail. and at a good price now

TMA TURBO

dgt_mustang · November 21st, 2008, 07:17 AM

jee, wonder who that guy making all that power is? he should really jump in this thread sometime so we could see him!

98stangv6 · November 21st, 2008, 07:46 AM

Originally Posted by itschristorres8

yeah heck theres a guy on the site with that making 437rwhp and 402rwtq on a single turbo setup!
TMA ftw! tons of kits avail. and at a good price now

TMA TURBO

Man i wonder who that guy is???

November 16th, 2008, 04:34 PM	#1
TOOLinYourFace Regular 2000 Mustang ? Join Date: Jun 2008 Location: Houston Posts: 61 iTrader: 0 reviews	Twin turbo setup? What would I have to do to my 00' v6 to be able to run a twin turbo setup?... I was also thinking about gettin a Windstar down the road so...

November 16th, 2008, 04:48 PM	#2
GreenFaleen MM's Resident Ricer 2006 Scion tC 13.001@113 Join Date: Nov 2006 Location: Raleigh/Lenoir, NC Posts: 9,880 Blog Entries: 2 iTrader: 1 reviews	buy a twin turbo kit and a tuner __________________ Scion Tc Turbo - 9psi 297whp 287wtq 2500lbs :p MM 4 Banger club: Senior Ricer NCMM #9 "Horsepower sells cars, torque wins races." -Carroll Shelby

November 16th, 2008, 05:40 PM	#4
96gtstang&V6 Enthusiast 1996 Mustang GT Join Date: Feb 2007 Location: Tucson, AZ Posts: 759 iTrader: 2 reviews	yeah just dont run alot of boost __________________ 2002 mustang v6- Auto, K&N CAI, Flowmaster dual exhaust, Black bullits dd 1996 mustang gt- 5spd, black, cobra hood, stock November Birthday Club Founder Old username: 97gt www.discounttiredirect.com

November 16th, 2008, 05:53 PM	#5
WLJohnson05 MM's Database Error 2004 Mustang V6 322.8 rwhp Join Date: Mar 2007 Location: VA Posts: 13,285 iTrader: 9 reviews	the turbo kit new maf new injectors new fuel pump dyno tune and if ur doing the windstar u need a modified intake pipe __________________ I'm trying to get rid of this stuff, feel free to make me an offer!: SCT Mass Air Flow Sensor $200 Tial Wastegate Springs $40 (10psi and 3.6psi)

November 16th, 2008, 07:59 PM	#6
94v6blkndred Hardcore Enthusiast 02 Turboed Saleen Clone faster than my v6 Join Date: Mar 2007 Location: Houston, TX Posts: 1,604 iTrader: 0 reviews	make it worth it and build your motor.....just IMO __________________ 94v6.CAI,Exhaust,3:73s-needs rear end rebuild 02GT/Saleen.built motor,62mm turbo 412hp/446tq @10psi,stock TB and intake

November 16th, 2008, 05:25 PM	#3
TOOLinYourFace Regular 2000 Mustang ? Join Date: Jun 2008 Location: Houston Posts: 61 iTrader: 0 reviews	even on a stock 3.8? just a TT and a tuner..

November 16th, 2008, 11:02 PM	#10
TOOLinYourFace Regular 2000 Mustang ? Join Date: Jun 2008 Location: Houston Posts: 61 iTrader: 0 reviews	well... i have a list of things im getting over the next few months.. ie. windstar, 4.10 gears, tuner... american muscle has a nice deal on the gears with a sct livewire tuner

November 17th, 2008, 12:40 AM	#11
Onemanzu ¡ʇsnq ɹo uʍop ǝpısdn Join Date: Oct 2006 Location: Looking for free hand jobs in poland springs nebraska... silly gooses Posts: 12,551 Blog Entries: 1 iTrader: 0 reviews	not worth it, go with single. or go big and rebuild the engine. __________________ My Foz

November 19th, 2008, 12:40 PM	#13
stangcharger Enthusiast Join Date: Sep 2008 Location: OKC, OK Posts: 806 iTrader: 0 reviews	ehh run 340-350rwhp on stock internals until it goes. no use building the motor if that or under is all you want.\ and dont put in gears with a turbo. use the stock gearing or 3.55 gears. the turbo likes the stress on it, and makes full boost lower than a centri, so gearis arent needed. __________________ 436rwhp/378rwtq tuned by HPP www.hppmotorsports.com - www.stangcharger.com - www.rpm-mustangs.com

November 20th, 2008, 11:38 PM	#15
blakehunter316 Regular 1989 Mustang GT 14.01 @ 103..... :( Join Date: Feb 2008 Location: Connersville Indiana Posts: 365 iTrader: 0 reviews	This guy that lives close to me did a head cam intake job on his v6 and ran a single turbo with some hardcore boost and he is planning on putting down 550 horse. I've seen it together and holy crap. Yea I believe it pushes over 500. But my point here is u don't need a tt setup really IMO. Single on a built motor or hel just do a hci. __________________ vortech s-trim off road h pipe super 40's steeda tri-ax c.a.i. 3.73s subframe cnntrs 255er

November 21st, 2008, 12:09 AM	#16
TOOLinYourFace Regular 2000 Mustang ? Join Date: Jun 2008 Location: Houston Posts: 61 iTrader: 0 reviews	so pretty much, go with the single cuz if i get the twin im not going to be able to use its full power without doing a bunch of other shit and really wont be worth it in the end?

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Twin turbo setup?
Thread	Thread Starter	Forum	Replies	Last Post
Turbo HorsePower Twin Turbo kit	dblindberg	2005 - 2010	34	June 17th, 2007 08:05 PM
Mellon's Twin Turbo Stealth vs Wills99z's Single Turbo z28	Mellon	Videos	10	December 30th, 2006 10:05 AM
Cheap Twin Turbo Setup	bwb3	5.0 Mustangs	5	October 14th, 2006 03:37 AM
Turbo, Twin Turbo, Procharger, or Kennebell?	black94gt	5.0 Mustangs	19	October 7th, 2006 10:41 AM
Super Charger vs Turbo/Twin Turbo: Pros and Cons of each	FireryDriver	2005 - 2010	9	September 17th, 2006 04:15 PM

All times are GMT -4. The time now is 05:33 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.