[GreenFaleen]

Well I got my lights today plan on installing them tomorrow just wondering if any one has done this before. There seems to be a set of led bulbs missing but i'm not sure these are the ones I got

http://cgi.ebay.com/ebaymotors/99-04...0067QQtcZphoto

the 3 vertical lights seem to not have a bulb but I am not sure if they reflect off the halo's?

but anyway if anyone has installed these some info would be nice and if the vertical leds do need a bulb and you know what kind I would greatly appreciate to know where to get them and how to put those in.

[itschristorres8]

i know mine were missing a bulb for the turning signal...i just uised my old one

[GreenFaleen]

Originally Posted by itschristorres8 i know mine were missing a bulb for the turning signal...i just uised my old one

yeah I have to do that mine was missing too. these things are confusing though.

[mikethetigerrr]

the leds idk, but the install should be pretty simple. the stock lights pretty much slide out and those look like they accept the stock wiring.

edit: just read a little down the page, they are direct oe fit so the install itself shouldn't take but 5 or 10 minutes tops.

[GreenFaleen]

Originally Posted by mikethetigerrr the leds idk, but the install should be pretty simple. the stock lights pretty much slide out and those look like they accept the stock wiring.

yeah I have to do some splicing for the halos but that seems about the worst of it.

[itschristorres8]

unplug your old lights
then there's gunna be 2 lil holders or black things that you gotta slide out per light

after that the light can be slide right on out then slip the new ones in.

[GreenFaleen]

Originally Posted by itschristorres8 unplug your old lights then there's gunna be 2 lil holders or black things that you gotta slide out per light after that the light can be slide right on out then slip the new ones in.

ok so slide in slide out seems simple enough thanks

[kerry]

i spliced everything to the driving amber lights except the headlights so they would all come on when u do the driving lights. also when u lock the door with the keyless entrytwice, it flashes the halo rings and looks sick!!
i have the fog lights attached to them as well and the whole thing blinking looks awesome

[GreenFaleen]

Originally Posted by kerry i spliced everything to the driving amber lights except the headlights so they would all come on when u do the driving lights. also when u lock the door with the keyless entrytwice, it flashes the halo rings and looks sick!! i have the fog lights attached to them as well and the whole thing blinking looks awesome

yeah thats what I was going to do. glad to know it looks good

[232stang]

im not really feeling the halo lights. to each his own. id stick with tinted stock ones. but better than your old crusty ones lol

[GreenFaleen]

Originally Posted by 232stang im not really feeling the halo lights. to each his own. id stick with tinted stock ones. but better than your old crusty ones lol

exactly.

[GreenFaleen]

Ok can someone tell me where to install the wires for the halos?

[scubasteve041186]

well you splice them.. buddy up there said conect them tot he amber dirving lights for the best results so do that?

[GreenFaleen]

Originally Posted by scubasteve041186 well you splice them.. buddy up there said conect them tot he amber dirving lights for the best results so do that?

yeah but I have no idea what to splice into. There is the plug for the main bulb , and the plug for the turn signal. I each has 3 or 4 wires running into it and I have no clue which ones the run the wires for the halos into. I also have no clue which is positive and which is negative on the wires for the plugs.

[stang94]

Red is +, black is -
Your going to connect the halo wire to the head light or park light one, which ever one you want for when you put the lights on to come on.
Thats all its simple man.
Take a pic of all the wiring a close up shot and post it. I"ll show you.

[GreenFaleen]

I'll post a pic in a bit but my wires are 2 black and a white with a red stripe I am guessing white is positive but I'm sure about which black wire.

[stang94]

You are correct. Now you get the black and white, decide where you want to connect to head light or marker light.

[GreenFaleen]

Well my dad is paying to have his mechanic do it tomorrow cause he doesn't want me to mess something up so I'm not going to argue. I'll have pics of the lights up tomorrow

[FaStStAnG5-0]

i did my halo's up to a seperate switch... a few of my buddy's have had the halo lights & the halo's always burned out when they had them wired to the main lights.. i didn't wanna take any risks so i just wired em to a switch!

i really don't like the visibility of these lights at all with the lowbeams.. i am half tempted to get rid of mine & put on some smoked headlights..

[GreenFaleen]

Originally Posted by FaStStAnG5-0 i did my halo's up to a seperate switch... a few of my buddy's have had the halo lights & the halo's always burned out when they had them wired to the main lights.. i didn't wanna take any risks so i just wired em to a switch! i really don't like the visibility of these lights at all with the lowbeams.. i am half tempted to get rid of mine & put on some smoked headlights..

They are at least 10 times brighter than my old ones so I am happy. I hooked them up to make sure they work and they are great. The bulbs for the halo seems easy to replace so I'm not to worried about that.