98GT twin turbo

dpstang98gt · May 14th, 2008, 01:10 AM

know i talked about it awhile ago and just wanted to let u guys know that i think im gopnna be selling the 98GT twin turbo, it was either keep it and get a built block and built transmission and bump up the boost to 500+HP which it would make easy, but i looked into it some and its just looking like im not gonna be able to afford it (at least not when im in school and gas is $4.29). Thanks guys and remember i really dont have to sell this it would just make my life a whole lot easier with some extra cash, now for the car:
40k miles 5-spd
The car was a stolen recovery before i had it therefore it recieved an R-Title
It has the Street Lethal Twin Turbo Kit on it
(2) 50mm Garret turbos
Custom piping
AJE tubular K-member
UPR CC plates
Front coilover kit
dropped approx. 1.5 all the way around (rears cut)
17x9/10.5 deep dish chrome bullits
New front Monroe Struts
SCT chip and SCT mass air meter
breather air filter on valve covers
255lph fuel pump, 42lb injectors
new front end alignment
steeda tri-ax short throw
3.55 FRPP gears
i may be forgetting some things but i will post them as i remember
all built and tuned by Terry at Street Lethal Performance
the car made 344RWHP and 425ft. lbs of TQ at only 9psi
this car is capable of making alot more power with a few more things done do it (PI swap)

YouTube - Twin Turbo 98 Mustang GT Dyno Run

heres the dyno vid

dc1515 · May 14th, 2008, 01:14 AM

how much u asking for it??

dpstang98gt · May 14th, 2008, 01:22 AM

im not really sure what to ask for it yet

dc1515 · May 14th, 2008, 01:24 AM

lol how r u gonna put it up for sell, without knowing how much its going to be? can u guesstimate?

dpstang98gt · May 14th, 2008, 01:29 AM

haha idk man i was hoping some people would just make some offers and we could work from there

dc1515 · May 14th, 2008, 01:32 AM

6500

dpstang98gt · May 14th, 2008, 01:35 AM

just double that and we would be in a good ball park

dc1515 · May 14th, 2008, 01:41 AM

oh so around 13000 is what ur looking for.. hmm thats not a bad price for a twin turbo GT, hmm i want it

dpstang98gt · May 14th, 2008, 10:44 AM

haha come and get it

White99stang · May 14th, 2008, 10:53 AM

i will give you 6.5k. doesn't have a clean title, and only makes 340hp with a twin turbo kit. Now if the motor and tranny were already built i would give you 13

beheivjer · May 14th, 2008, 11:28 AM

1996 Twin Turbo Mustang Cobra

this would be good place to start your offers

gooberhead320 · May 14th, 2008, 02:21 PM

how far are you from toledo?

dpstang98gt · May 14th, 2008, 05:46 PM

Originally Posted by gooberhead320

how far are you from toledo?

hmm probably about 3 hours away

dc1515 · May 21st, 2008, 06:56 PM

if i did want to get it, i live in CA how would we do this?

04DSGV6 · May 21st, 2008, 07:28 PM

Originally Posted by beheivjer

1996 Twin Turbo Mustang Cobra

this would be good place to start your offers

Doesn't have a clean title or run nearly as much HP. I agree with white

dpighetti · May 25th, 2008, 07:01 PM

still available?

dpstang98gt · May 29th, 2008, 05:18 PM

yes still available

HBK_2007 · May 29th, 2008, 06:08 PM

actually i think 95 is a good price. Bizz wants 17.5 for his Gobra

trill gear head · June 10th, 2008, 03:22 PM

is it still available?

dpstang98gt · June 26th, 2008, 01:01 AM

i still got this $12,900, just got new dynomax race mufflers put on and bumped up the boost some should be around 375HP, this is a very clean and great car

May 14th, 2008, 01:14 AM	#2
dc1515 Regular iTrader: 0 / 0% 1998 Mustang GT Need to hit the track! Join Date: Mar 2008 Posts: 267	how much u asking for it?? __________________ Flowmaster MAC Prochamber PI swap JLT CAI BBK 70mm T/B Coming Soon --- Ford Racing 4.10s, SCT XCAL3

May 14th, 2008, 01:22 AM	#3
dpstang98gt Regular iTrader: 0 / 0% Join Date: Nov 2007 Location: East Liverpool, Ohio Posts: 58	im not really sure what to ask for it yet __________________ 98GT Twin Turbo built by Terry at Street Lethal Performance Tri-ax short throw, FRPP 3.55 gears UPR CC PLates, AJE tubular K-member Front coil-overs (rear cut) 1.5 inch drop 17x9/10.5 chrome deep dish bullets

May 14th, 2008, 01:24 AM	#4
dc1515 Regular iTrader: 0 / 0% 1998 Mustang GT Need to hit the track! Join Date: Mar 2008 Posts: 267	lol how r u gonna put it up for sell, without knowing how much its going to be? can u guesstimate? __________________ Flowmaster MAC Prochamber PI swap JLT CAI BBK 70mm T/B Coming Soon --- Ford Racing 4.10s, SCT XCAL3

May 14th, 2008, 01:29 AM	#5
dpstang98gt Regular iTrader: 0 / 0% Join Date: Nov 2007 Location: East Liverpool, Ohio Posts: 58	haha idk man i was hoping some people would just make some offers and we could work from there __________________ 98GT Twin Turbo built by Terry at Street Lethal Performance Tri-ax short throw, FRPP 3.55 gears UPR CC PLates, AJE tubular K-member Front coil-overs (rear cut) 1.5 inch drop 17x9/10.5 chrome deep dish bullets

May 14th, 2008, 01:32 AM	#6
dc1515 Regular iTrader: 0 / 0% 1998 Mustang GT Need to hit the track! Join Date: Mar 2008 Posts: 267	6500 __________________ Flowmaster MAC Prochamber PI swap JLT CAI BBK 70mm T/B Coming Soon --- Ford Racing 4.10s, SCT XCAL3

May 14th, 2008, 01:35 AM	#7
dpstang98gt Regular iTrader: 0 / 0% Join Date: Nov 2007 Location: East Liverpool, Ohio Posts: 58	just double that and we would be in a good ball park __________________ 98GT Twin Turbo built by Terry at Street Lethal Performance Tri-ax short throw, FRPP 3.55 gears UPR CC PLates, AJE tubular K-member Front coil-overs (rear cut) 1.5 inch drop 17x9/10.5 chrome deep dish bullets

May 14th, 2008, 01:41 AM	#8
dc1515 Regular iTrader: 0 / 0% 1998 Mustang GT Need to hit the track! Join Date: Mar 2008 Posts: 267	oh so around 13000 is what ur looking for.. hmm thats not a bad price for a twin turbo GT, hmm i want it __________________ Flowmaster MAC Prochamber PI swap JLT CAI BBK 70mm T/B Coming Soon --- Ford Racing 4.10s, SCT XCAL3

May 14th, 2008, 10:44 AM	#9
dpstang98gt Regular iTrader: 0 / 0% Join Date: Nov 2007 Location: East Liverpool, Ohio Posts: 58	haha come and get it __________________ 98GT Twin Turbo built by Terry at Street Lethal Performance Tri-ax short throw, FRPP 3.55 gears UPR CC PLates, AJE tubular K-member Front coil-overs (rear cut) 1.5 inch drop 17x9/10.5 chrome deep dish bullets

May 14th, 2008, 10:53 AM	#10
White99stang #1 Asshole Mod iTrader: 0 / 0% Join Date: Aug 2005 Location: elkridge, MD Posts: 2,402	i will give you 6.5k. doesn't have a clean title, and only makes 340hp with a twin turbo kit. Now if the motor and tranny were already built i would give you 13 __________________ 99 Mustang GT VT 302 Stroker (race car) 11.13@123 for sale 9.7k 06 Dodge MegaCab. Cummins diesel power. Silencer ring removed, intake baffling mia, and swiss cheesed air box, Isspro pyro, boost, and tranny gauges, 6inch chrome tip

May 14th, 2008, 11:28 AM	#11
beheivjer Enthusiast iTrader: 0 / 0% Join Date: Feb 2006 Location: belding, michigan Posts: 775	1996 Twin Turbo Mustang Cobra this would be good place to start your offers __________________ 1966 LUBR Bronco 1979 2.3t Cobra 1994 V6 Vert & a 351 ON A STAND 2002 Mercury Mountaineer 4.6 1994 Jeep XJ 4.5" lift 33"MTR http://www.cardomain.com/ride/680999 http://www.myspace.com/beheivjer

May 21st, 2008, 06:56 PM	#14
dc1515 Regular iTrader: 0 / 0% 1998 Mustang GT Need to hit the track! Join Date: Mar 2008 Posts: 267	if i did want to get it, i live in CA how would we do this? __________________ Flowmaster MAC Prochamber PI swap JLT CAI BBK 70mm T/B Coming Soon --- Ford Racing 4.10s, SCT XCAL3

May 25th, 2008, 07:01 PM	#16
dpighetti Newbie iTrader: 0 / 0% 96 Saleen Cobra Speedster Join Date: May 2008 Location: MA Posts: 20	still available?

May 29th, 2008, 05:18 PM	#17
dpstang98gt Regular iTrader: 0 / 0% Join Date: Nov 2007 Location: East Liverpool, Ohio Posts: 58	yes still available __________________ 98GT Twin Turbo built by Terry at Street Lethal Performance Tri-ax short throw, FRPP 3.55 gears UPR CC PLates, AJE tubular K-member Front coil-overs (rear cut) 1.5 inch drop 17x9/10.5 chrome deep dish bullets

May 29th, 2008, 06:08 PM	#18
HBK_2007 Enthusiast iTrader: 0 / 0% 1996 Mustang GT next year Join Date: Jan 2008 Location: Wyoming Posts: 731	actually i think 95 is a good price. Bizz wants 17.5 for his Gobra __________________ JLT Ram Air Intake, Otherwise stock

June 10th, 2008, 03:22 PM	#19
trill gear head Newbie iTrader: 0 / 0% Join Date: Apr 2007 Posts: 9	is it still available?

Threads Similar to: 98GT twin turbo
Thread	Thread Starter	Forum	Replies	Last Post
my 98GT twin turbo dyno run	dpstang98gt	96-98	33	April 21st, 2008 04:56 PM
98GT NPI Turbo HP?	dpstang98gt	96-98	31	April 8th, 2008 06:07 PM
Mellon's Twin Turbo Stealth vs Wills99z's Single Turbo z28	Mellon	Videos	10	December 30th, 2006 10:05 AM
Turbo, Twin Turbo, Procharger, or Kennebell?	black94gt	5.0 Mustangs	19	October 7th, 2006 10:41 AM
Super Charger vs Turbo/Twin Turbo: Pros and Cons of each	FireryDriver	2005+	9	September 17th, 2006 04:15 PM

All times are GMT -4. The time now is 06:19 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

June 26th, 2008, 01:01 AM	#20
dpstang98gt Regular iTrader: 0 / 0% Join Date: Nov 2007 Location: East Liverpool, Ohio Posts: 58	i still got this $12,900, just got new dynomax race mufflers put on and bumped up the boost some should be around 375HP, this is a very clean and great car __________________ 98GT Twin Turbo built by Terry at Street Lethal Performance Tri-ax short throw, FRPP 3.55 gears UPR CC PLates, AJE tubular K-member Front coil-overs (rear cut) 1.5 inch drop 17x9/10.5 chrome deep dish bullets