[ChrisJ]

A friend of mine is selling this...Its a steal...Located in Reston, Virginia...

2003 Mustang GT, 21500 miles, 800 hp
For sale! I built a street legal BEAST that has competed in King of the Streets (6th place) and has been in 5.0 magazine. If you have ever tried to build a car like this then you know how hard it is and how long it takes. Now you have the chance to buy an 800+ hp car that will run 10s all day long then turn around and drive home with the A/C on and the radio cranking your favorite tunes! It took 3 years to get this car where I wanted it and you can have it for less than half the cost and NO WAIT!!! The car just passed the Virginia state safety inspection in April 08 and Fairfax County Va Emissions on 31 May 08!!! She is all set!!!

I have over 40K in parts alone on the car. I am not looking to get that much out of the car. I had a professional shop build the car and I had a blast with it. I am planning to sell this one and start playing with my new Mustang. If interested please shoot me an email to tombodc@hotmail.com

It last dynoed at 597/551 on the low boost (about 15#) tune through an automatic trans with the converter locked. It dynoed at 654/602 on the high boost tune (654/.8 = 817 base hp). The shop says the high boost run was hot and it pulled timing. He couldn't wait for it to cool off as the shipping company was outside waiting to pick up the car (his guess was that it would have put down 676 which is about 845 base hp). These dyno runs were both on race gas. The pump gas tune for the 15# pulley netted an 11.19 on 28" slicks leaving the line at idle

YouTube - Low Boost run DCGT

I put the low boost race gas tune in and ran a 10.83 trying to foot brake it at the line. Leaving off of the trans brake would have given me a couple more tenths at least. The high boost tune is good for very low tens... Below is the list with pricing for each part straight from the bills. Please feel free to email me with any questions or offers. Serious offers only please... If you have ever tried to build a car like this then you know it is a long and painful process. Add to the price of the parts the actual cost of the car and the labor and this car is a steal... This car will go to the first decent offer I have as I don't have any bills to pay on it and I want to move on to building a new car so please don't be afraid to make offers. Trust me, the car will go CHEAP!!!

The car has been back from its latest upgrade, the KB 2.8 (yes KB builds special intakes to fit a KB 2.8 on 2V motors) for about a month. The car just passed the state safety inspection in April 08 and Fairfax County Va Emissions on 31 May.

# MPH Kenne Bell 2.8H mongoose kit $5,900.00
# 2.76 (red) Non-slip 8-rib blower pulley with hub $150.00
# 3.10 (clear) Non-slip 8-rib blower pulley $89.00
# JLT 12" Cold Air Intake for high boost applications $265.00
# Accufab Cobra throttle body $369.00
# 90mm Lightning MAF $135.00
# Zone 5 Maf-x $100.00
# Kenne Bell 8-rib kit $400.00
# BGG Gripper plate $150.00
# MPH Built Aluminum Mach block $3,750.00
# MPH race stage 3+ race heads $2,725.00
# Manley Nextex valve springs and Manley spring retainers $415.00
# MPH custom cams for KB $550.00
# ARP head studs $205.00
# Moroso 7 quart oil pan $270.00
# Cobra oil pump with VT billet gears $430.00
# Canton aluminum expansion tank $260.00
# Canton aluminum supercharger coolant tank $120.00
# Fluidyne Radiator $490.00
# Kooks Headers $1,016.00
# Kooks O/R X-pipe $345.00
# Kooks CAT’d X-pipe $492.00
# Flowmaster 2-chamber 40 series mufflers $122.96
# 7.5" Innovators West SFI Crank Pulley $425.00
# 1999 Timing cover with steel 3-bolt tensioner $244.00
# Cobra tank $913.00
# Twin GT40 fuel Pumps $270.00
# upgraded wiring for GT40 fuel pumps and FPDM $90.00
# Zone 5 FPDM $175.00
# KB Boost-a-spark $200.00
# KB boost-a-pump, 40 amp, for the GT pumps $249.00
# KB boost-a-pump, 40 amp, for the MAF $249.00
# -8 aluminum fuel line (eliminates fuel smell from braided race gas lines) $69.89
# CPR fuel rails $269.00
# 60# injectors $399.00
# Performance Automatic Race AODE with full lock up $4,200.00
# Transmission Buffer, GEF 2R3Z6068AA $79.00
# BM (5500 stall, no lock) race torque converter $1000
# Dirty Dog Racing Billet converter (3400 stall, lock) $900
# B&M ratchet shifter $200.00
# Transmission Cooler $200.00
# Shifter handle with button $36
# Shifter conversion kit for AODE $50
# Billet console pieces $305
# Flex dip stick $65
# Strange Race chromoly drive shaft $375
# Metco drive shaft safety loop $190.00
# Auburn Pro 31 spline diff which retains the ABS rings $523.00
# FRPP 3.55:1 gears $195.00
# Ford Racing 31-spline axles $250.00
# FRPP rear main girdle $190.00
# Metco adjustable upper control arms $307
# Metco lower control arms $384
# welded diff tubes and torque boxes $350.00
# Steeda full length sub-frame connectors $200.00
# MM 4-bolt caster/camber plates $200
# X2 ball joints $130.00
# Steeda Bump steer kit $150.00
# Strange adjustable struts and shocks $360.00
# Steeda Sport springs front and rear $230.00
# Custom powder coated roll bar with removable swing outs $1,650.00
# Stock front and rear tires and wheels
# Torque Thrust IIs, 8", with Nitto tires $1,000.00
# Torque Thrust IIs, 9.5", with Nitto drag radials $1,150.00
# Torque Thrust IIs, 11", with Nitto drag radials $1,150.00
# 28" ET streets mounted on 15x10 Drag Lite wheels $723.00
# 28" ET slicks mounted and screwed on 15x10 Drag Lite wheels $687.00
# 3" wheel studs front and rear $75.80
# Maximum Motorsports Hubsentric Wheel Spacer 1.5" $74.95
# Autometer fuel pressure guage $175.00
# Autometer boost guage $125.00
# Autometer trannsmission fluid temp guage $54.82
# Triple Pillar guage pod for boost, fuel pressure, and tranny fluid temp $59.24
# Wide Band Commander A/F guage with data logging $495.00
# Steering Column guage pod for A/F guage $30.00
# Raptor shift light $110.00
# SCT Raptor Datalogger $475.00
# Hurst Line Lock $130.00
# Hurst line lock installation kit and adapter kit $39.00
# Cervini Stalker front bumper $480.00
#Cervini Cowl hood $480.00
# Steeda Sport Springs $250.00
# Steeda Battery Relocation Kit $230.00
# Redline Tuning Hood Struts $120.00
# Mach 1 Grill delete $130.00
# MMR rear seat delete $172.75
# SCT Xcal2 with 3 tunes loaded on it$380.00
#LOJACK installed $800.00

TOTALS $41,895.41

[DiZzyBonne]

Nice car! Just a quick question, who won 1st place and with what car? I'm just curious is all . Good luck with your sale!!!

[whtpny]

sweet car, awesome build.. nice color too, heh
hopefully he'll get what he's asking

Originally Posted by DiZzyBonne Nice car! Just a quick question, who won 1st place and with what car? I'm just curious is all . Good luck with your sale!!!

1st place winner of nitto's king of the street was a 900+ rwhp tt cobra from gainesville, ga

[White99stang]

yeah the same person that did that car did the car that won first place. And that shall be Tim at modularpowerhouse.

[DiZzyBonne]

I was just wondering because I wanted to see if it was a Mustang or not, and it is ! I've heard nothing but wonders about Tim, I wish I was closer to GA .

[EDIT]

Oh, I didn't notice that Chris originally stated the name of the even as well. Now that I Googled it it turns out that it was a Mustang event lol.

[ChrisJ]

Updated with new pictures...