rsdcutoms.com

Drgnracin72 · April 27th, 2006, 10:45 PM

i have tlaked to a few people with this guys stuff and they are pleased. the shiping takes awhile becasue hes out of canada but he has some badass looking stuff. go give it look. http://www.rsdcustoms.com/rsd.htm

00SoSlow · April 27th, 2006, 11:39 PM

those deck lids look pretty badass, might have to check into those.... thanks for the site

AtlanticBlue99 · April 27th, 2006, 11:45 PM

i was looking at them for a rear seat delete kit for the track. they make reallu nice kits, and the vinyl ones look realy classy too- and with storage compartments.

Night Train · April 27th, 2006, 11:50 PM

i recommend using this place for a rear seat delete.... http://www.rearseatdelete.com/

Drgnracin72 · April 27th, 2006, 11:58 PM

a lot more expensive and dont look nearly as cool!

00SoSlow · April 28th, 2006, 12:15 AM

so can people actually sit on these things or is it really delicate if something heavy would be on it>?

Bossman351 · April 28th, 2006, 12:17 AM

Originally Posted by Night Train

i recommend using this place for a rear seat delete.... http://www.rearseatdelete.com/

They dont even offer one for a fox yet. What kinda crap is that?

AtlanticBlue99 · April 28th, 2006, 12:17 AM

they are mostly 1/4" ply carpeted or covered. i just take the rear and pass. seats out for track passes though. i also took out the spare tire/jack and fiberglassed 1/4" ply over the hole to keep a sturdy trunk surface. the rsd is still about as half as heavy as the seats themselves.

Drgnracin72 · April 28th, 2006, 12:22 AM

i need to do that to AB. i have no tire back there so my carpet has a huge sag ass in it. if ya wanna do a write up about how yo did it id read it

Bossman351 · April 28th, 2006, 12:24 AM

The only problem I would have is that I have a hatch with the fuel cell and battery inside the vehicle and track rules require a metal fire barrier between the drivers compartment and the fuel cell. So I just gutted the heavy stuff out of the factory rear seat and left the cushioning on the factory metal backing and voila!! A metal fire barrier that folds down to cover the back seat.

00SoSlow · April 28th, 2006, 12:25 AM

right on... i have a custom box in mine and it covers the spare so if i ever get a flat id never be able to change it so i am just gonna take the spare out for less weight

AtlanticBlue99 · April 28th, 2006, 12:26 AM

http://www.moddedmustangs.com/forums...te-vt1543.html

basically, i carpeted it for the V6FC race, but now i took the carpeting out from under rear seat and put the seat back in and completely removed the amp/subs/wiring harness. so for track time, my car is pretty stripped and safe. for street time, it is still passenger friendly...

April 27th, 2006, 10:45 PM	#1
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,638 iTrader: 2 reviews	rsdcutoms.com i have tlaked to a few people with this guys stuff and they are pleased. the shiping takes awhile becasue hes out of canada but he has some badass looking stuff. go give it look. http://www.rsdcustoms.com/rsd.htm __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

April 27th, 2006, 11:45 PM	#3
AtlanticBlue99 I Post Entirely Way Too Much 1999 Ford Mustang V6 14.79 @ 92.15 Join Date: Aug 2005 Location: University of Georgia Posts: 8,859 Blog Entries: 1 iTrader: 0 reviews	i was looking at them for a rear seat delete kit for the track. they make reallu nice kits, and the vinyl ones look realy classy too- and with storage compartments. __________________ ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.

April 27th, 2006, 11:58 PM	#5
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,638 iTrader: 2 reviews	a lot more expensive and dont look nearly as cool! __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

April 28th, 2006, 12:17 AM	#8
AtlanticBlue99 I Post Entirely Way Too Much 1999 Ford Mustang V6 14.79 @ 92.15 Join Date: Aug 2005 Location: University of Georgia Posts: 8,859 Blog Entries: 1 iTrader: 0 reviews	they are mostly 1/4" ply carpeted or covered. i just take the rear and pass. seats out for track passes though. i also took out the spare tire/jack and fiberglassed 1/4" ply over the hole to keep a sturdy trunk surface. the rsd is still about as half as heavy as the seats themselves. __________________ ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.

April 28th, 2006, 12:22 AM	#9
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,638 iTrader: 2 reviews	i need to do that to AB. i have no tire back there so my carpet has a huge sag ass in it. if ya wanna do a write up about how yo did it id read it __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

April 27th, 2006, 11:39 PM	#2
00SoSlow Hardcore Enthusiast Join Date: Feb 2006 Location: Pewaukee, Wisconsin Posts: 1,340 iTrader: 0 reviews	those deck lids look pretty badass, might have to check into those.... thanks for the site

April 27th, 2006, 11:50 PM	#4
Night Train Newbie Join Date: Apr 2006 Posts: 47 iTrader: 0 reviews	i recommend using this place for a rear seat delete.... http://www.rearseatdelete.com/

April 28th, 2006, 12:15 AM	#6
00SoSlow Hardcore Enthusiast Join Date: Feb 2006 Location: Pewaukee, Wisconsin Posts: 1,340 iTrader: 0 reviews	so can people actually sit on these things or is it really delicate if something heavy would be on it>?

April 28th, 2006, 12:24 AM	#10
Bossman351 Hardcore Enthusiast Join Date: Aug 2005 Location: On the trailer.......broke. Posts: 1,258 iTrader: 0 reviews	The only problem I would have is that I have a hatch with the fuel cell and battery inside the vehicle and track rules require a metal fire barrier between the drivers compartment and the fuel cell. So I just gutted the heavy stuff out of the factory rear seat and left the cushioning on the factory metal backing and voila!! A metal fire barrier that folds down to cover the back seat. __________________

April 28th, 2006, 12:25 AM	#11
00SoSlow Hardcore Enthusiast Join Date: Feb 2006 Location: Pewaukee, Wisconsin Posts: 1,340 iTrader: 0 reviews	right on... i have a custom box in mine and it covers the spare so if i ever get a flat id never be able to change it so i am just gonna take the spare out for less weight

April 28th, 2006, 12:26 AM	#12
AtlanticBlue99 I Post Entirely Way Too Much 1999 Ford Mustang V6 14.79 @ 92.15 Join Date: Aug 2005 Location: University of Georgia Posts: 8,859 Blog Entries: 1 iTrader: 0 reviews	http://www.moddedmustangs.com/forums...te-vt1543.html basically, i carpeted it for the V6FC race, but now i took the carpeting out from under rear seat and put the seat back in and completely removed the amp/subs/wiring harness. so for track time, my car is pretty stripped and safe. for street time, it is still passenger friendly... __________________ ModdedAutos 1999 Mustang V6 I used to list my mods here but stopped when I exceeded 255 characters.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 07:15 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.