my heap on the dyno

01GT4.6 · July 8th, 2008, 05:32 PM

I quickly realized that my 10# bottle isn''t enough, on top of that it wasn''t full when I went. We made a test hit on a 50 shot and all was well, did 2 hits on the 100 shot (changed the fuel jet on the 2nd hit because the 1st hit was too fat, 2nd hit the a/f looked nice but started to fall as I lost bottle pressure). Then we did the 150 shot, the car actually made less hp than it did on the 100 but the a/f fell as low as it could go (10:1).

I now know that I either need to run two 10# bottles or one 15# bottle.

The dyno at JMS reads much much lower than the other dyno that my car made 320/333 NA on. In fact today it was so low it read 302/306 NA, which I don't really care. The car turns the ETs of a car with 320+rwhp and ET's are what it's all about.

Anyhow the car made 390/474 on a 100 shot losing power because of the bottle pressure. I'm quite sure than on the 1st dyno it would have been closer to 420ish, but as long as it runs like it actually makes it I'm not too worried about dyno numbers.

my mustang with a small shot of nitrous on the...

YouTube - my mustang with a small shot of nitrous...

ricerraper33 · July 8th, 2008, 07:41 PM

sweet bro how much was it for your dyno runs?

01GT4.6 · July 8th, 2008, 08:18 PM

Originally Posted by ricerraper33

sweet bro how much was it for your dyno runs?

I've made several trip there because i had issues with my kit, so I think they may have felt sorry for me. It was $225 for the tunes

Mustang Racer · July 8th, 2008, 09:44 PM

nice numbers

07 procharger · July 8th, 2008, 09:47 PM

dude i run a 10 pounder....it can last one night or a week depending on the action

04GTAMPA · July 8th, 2008, 09:54 PM

I suggest you try another dyno. My car made 313 at one point and a few months later it came down to 298. The smoke gave me signs of worn rings/blow-by after so much nitrous and beat downs on a daily basis. At one point I got 419hp/494tq on a 125 shot. At the end, I was lucky to get 393/448...

04GTAMPA · July 8th, 2008, 09:55 PM

and I had 2 10's that I filled every Friday and sometimes the following tuesday. That much action.

PowerShiftz02GT · July 8th, 2008, 09:57 PM

Pretty nice... Whats your exhaust setup?

01GT4.6 · July 8th, 2008, 10:10 PM

Originally Posted by 04GTAMPA

I suggest you try another dyno. My car made 313 at one point and a few months later it came down to 298. The smoke gave me signs of worn rings/blow-by after so much nitrous and beat downs on a daily basis. At one point I got 419hp/494tq on a 125 shot. At the end, I was lucky to get 393/448...

I'll probably take it to a dyno day soon on a different dyno, but I'm not too concerned with the low #'s. As long as it runs strong that's all that counts. If you don't mind me asking what did it run NA and on the spray and did you times mirror the change in dyno numbers? My car actually feels stronger than ever, I guess the more miles I put on it the better it's going to do (I think I have about 6k miles now)

Powershiftz, I have mac long tubes, mac off road h-pipe and magnaflw catback.

Military98stang · July 9th, 2008, 04:38 AM

great sounding stang man nice work on those numbers.

01GT4.6 · July 9th, 2008, 12:58 PM

Originally Posted by Military98stang

great sounding stang man nice work on those numbers.

thanks man, and thanks for serving!

Military98stang · July 9th, 2008, 01:34 PM

not a problems. thanks for appreciating. lol

PowerShiftz02GT · July 9th, 2008, 02:14 PM

man do you really, i was wanting to find a Video of a H Pipe and Magnaflow catback. it sounds sweet as hell. got any other exhaust videos of your car?

01GT4.6 · July 9th, 2008, 02:28 PM

Originally Posted by PowerShiftz02GT

man do you really, i was wanting to find a Video of a H Pipe and Magnaflow catback. it sounds sweet as hell. got any other exhaust videos of your car?

Thanks, I actually found a company that was selling the magnaflow and magnapack catbacks for $319 shipped, I've sent them a ton of business but in the last couple years they had to go up some in their price, but still cheaper than everyone else

YouTube - cammed mustang exhaust clip

YouTube - my cammed mustang

PowerShiftz02GT · July 9th, 2008, 09:34 PM

OH my god dude, I love it so much. Sounds so smooth. Yeah magnaflow are just way too much money for me. i cant afford no 600.00 catback. If i find one around 300-4 id probably pick one up. My catback right now is so rusted and shit its about to blow out. so i know i gotta start looking for a new system soon. sounds really good though man. Great job with her.

01GT4.6 · July 10th, 2008, 03:24 AM

Originally Posted by PowerShiftz02GT

OH my god dude, I love it so much. Sounds so smooth. Yeah magnaflow are just way too much money for me. i cant afford no 600.00 catback. If i find one around 300-4 id probably pick one up. My catback right now is so rusted and shit its about to blow out. so i know i gotta start looking for a new system soon. sounds really good though man. Great job with her.

PM me and I'll let you know what company to get one from for like $350 shipped to your door (new)

347stroker · July 21st, 2008, 08:01 PM

Very nice car, what heads/cams are you running?

01GT4.6 · July 22nd, 2008, 02:02 PM

Originally Posted by 347stroker

Very nice car, what heads/cams are you running?

patriot stage 3 heads and custom cams from MPH

July 8th, 2008, 07:41 PM	#2
ricerraper33 Enthusiast Join Date: Aug 2007 Location: Naples Florida Posts: 719	sweet bro how much was it for your dyno runs? __________________ full exhaust custom H pipe,cai, t-spacer, ud pulleys, 75 wet shot of nitrous, mach 1 rims, Xcal 2 custom tuned nitrous 87 93 octane VMP 9.1@80.07in the 1/8th mile

July 8th, 2008, 09:47 PM	#5
07 procharger MM's resident Juice head 07 Mustang GT Join Date: Nov 2007 Location: Red Deer Alberta...COME GET A TASTE! Posts: 3,699	dude i run a 10 pounder....it can last one night or a week depending on the action __________________ http://s245.photobucket.com/albums/g...ent=run005.flv

July 8th, 2008, 09:54 PM	#6
04GTAMPA Hardcore Enthusiast 1999 Mustang GT Join Date: Apr 2007 Location: Riverview, FL Posts: 2,260	I suggest you try another dyno. My car made 313 at one point and a few months later it came down to 298. The smoke gave me signs of worn rings/blow-by after so much nitrous and beat downs on a daily basis. At one point I got 419hp/494tq on a 125 shot. At the end, I was lucky to get 393/448... __________________

July 8th, 2008, 09:55 PM	#7
04GTAMPA Hardcore Enthusiast 1999 Mustang GT Join Date: Apr 2007 Location: Riverview, FL Posts: 2,260	and I had 2 10's that I filled every Friday and sometimes the following tuesday. That much action. __________________

July 8th, 2008, 09:57 PM	#8
PowerShiftz02GT Hardcore Enthusiast 2002 Mustang GT Join Date: Nov 2007 Location: Michigan Posts: 1,412	Pretty nice... Whats your exhaust setup? __________________ -5-Speed -BBK CAI -UD Pulleys -BBK 70MM TB -Mac O/R H pipe -Trick Flow Plenum -Yokohama AVS ES100 Tires -UPR Blue Thunder Short Throw -Magnaflow Magnapack Catback

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

July 8th, 2008, 09:44 PM	#4
Mustang Racer Regular 2003 Mustang GT 12.78@106.44 Join Date: Feb 2007 Location: Delano, CA Posts: 240	nice numbers

July 9th, 2008, 04:38 AM	#10
Military98stang Enthusiast 1998 GT VERT 5 SPEED Join Date: Apr 2008 Location: middle east at the moment Posts: 592	great sounding stang man nice work on those numbers. __________________ http://www.cardomain.com/ride/3068325 EAT ...... SLEEP .......LIFT........repeat!

July 9th, 2008, 01:34 PM	#12
Military98stang Enthusiast 1998 GT VERT 5 SPEED Join Date: Apr 2008 Location: middle east at the moment Posts: 592	not a problems. thanks for appreciating. lol __________________ http://www.cardomain.com/ride/3068325 EAT ...... SLEEP .......LIFT........repeat!

July 9th, 2008, 02:14 PM	#13
PowerShiftz02GT Hardcore Enthusiast 2002 Mustang GT Join Date: Nov 2007 Location: Michigan Posts: 1,412	man do you really, i was wanting to find a Video of a H Pipe and Magnaflow catback. it sounds sweet as hell. got any other exhaust videos of your car? __________________ -5-Speed -BBK CAI -UD Pulleys -BBK 70MM TB -Mac O/R H pipe -Trick Flow Plenum -Yokohama AVS ES100 Tires -UPR Blue Thunder Short Throw -Magnaflow Magnapack Catback

July 9th, 2008, 09:34 PM	#15
PowerShiftz02GT Hardcore Enthusiast 2002 Mustang GT Join Date: Nov 2007 Location: Michigan Posts: 1,412	OH my god dude, I love it so much. Sounds so smooth. Yeah magnaflow are just way too much money for me. i cant afford no 600.00 catback. If i find one around 300-4 id probably pick one up. My catback right now is so rusted and shit its about to blow out. so i know i gotta start looking for a new system soon. sounds really good though man. Great job with her. __________________ -5-Speed -BBK CAI -UD Pulleys -BBK 70MM TB -Mac O/R H pipe -Trick Flow Plenum -Yokohama AVS ES100 Tires -UPR Blue Thunder Short Throw -Magnaflow Magnapack Catback

July 21st, 2008, 08:01 PM	#17
347stroker Enthusiast 2002 Mustang GT Join Date: Mar 2008 Location: N. Texas Posts: 966	Very nice car, what heads/cams are you running? __________________ Foxlake stage 2 heads, CMS stage 2 cams, Custom Diablo tune, BBK LT's, BBK O/R H, Bassani Race Mufflers, MGW STS, 75MM TB, K&N CAI, Eibach Sportlines, 4.10's Mineral Gray Club Member #1

Threads Similar to: my heap on the dyno
Thread	Thread Starter	Forum	Replies	Last Post
Dyno in KY?	blackstang2004	99-04	2	March 3rd, 2008 11:27 PM
Jan 19th Ft Myers - VMP Mobile Dyno - show, dyno runs and tuning by appointment	Justin00Stang	Southeast	0	January 4th, 2008 08:26 PM
Mustang Dyno vs Dyno Jet	BLOWN89	5.0 Mustangs	18	December 1st, 2007 11:34 PM
Dyno Jet vs Mustang dyno	bransdaman78	General Tech	6	April 2nd, 2007 06:23 PM
Mustang Dyno Global Dyno Day!	BadMoFo	Southeast	1	September 20th, 2006 05:09 PM

All times are GMT -4. The time now is 06:32 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.