[trueballerisme]

hey guys i know ur gonna say ima ricer but im installing a underbody kit and i cant get my wires through the firewall from the battery if you guys can let me know wut i need do or how it would be great

[DSEZ]

ive got glowshift gauges 7 led underbody and rim kit set up. Pain in the ass my friend. I ended up getting so pissed half way done i paid the full price from the autobody up the street to finish.

[jealousy]

there should be some plugs on your firewall u can run it with, ive got l.e.ds in my grill interior and those windshield wiper things. i got my wires through in the plug right by my gas pedal

[DSEZ]

i did mine to the one in the center console and the one on the lighter, i have them on different lines

[trueballerisme]

shiaatt i got it through and stuff but i dont kow how to get them on the sides of the car... iv got them on the front and back... but the sides there is no were. so my dad said he pay to get it installed at the shop, cause he doesnt wanna fuck up the warranty

[scubasteve041186]

ok then problem kinda solved? either they're gona run it through the fenders or drill a hole somehwre

[DSEZ]

i used the pre-existing holes in my 99

[trueballerisme]

ya jus the shit is expensive

[DSEZ]

i got both on ebay as a set for 230 shipped. Glow Shift Gauges are execelent. I had a blown led and they have a great return and replacement policy. drains the fuk out of ur battery.....even though they are leds. Also if you get the wireless remotes dont use them ever. You dont know how many times that damn on button gets hit on accident. Ive looked out my window 2 or 3hrs after i got out of the car. Once its dark you can finally see that there on and u got a dead battery.

[AndyG47]

You don't have a ricer Mon Amie. With the ammount of neon on my car I should take out stock in OPTx.

For my underbody install I ran both side and front tube wires into the engine bay and into a body plug I found. For the rear I went upinto the trunk through a body plug then followed the wires for my rear speakers. The distribution block is on the wall above my gas pedal.

I mounted the side tubes to the side skirts. The only problem I have with this is that the sides don't glow as much as the front and rear. However they are protected quite well.

Paid $80 for my kit at Pep Boys.

NEON UPS:
List of all my neon. All are blue. I kinda went crazy.......

Interior:
6" OPTx tube in each of the front foot wells
OPTx Radio Bar
Dome light and map lights redone in LEDs
Lighted shift boot (Custom, had to cut and re-sew)

Exterior:
Running Pony Grille lit
OPTx Underglow
Lighted side scoops
LED washer nozzles

Not the best Pic

[texas_mustang]

wow... the cobra eyes and scoop neon is a little to much. but the pony emblem looks badass

[jealousy]

thats a big negative, it doesnt drain hardly any batts if there l.e.ds you can basically leave them on all the time if you choose to, ive left mine on over night many time by accident

[Bies08]

I live like 1/2 a mile down the road..so im thinking bout like...making a plexiglass cover plate..idk if thats the right word..but like..getting plexiglass and put it over the lighs so it acts as a 'skid plate'..kinda sorta....but i dont know where to mount it on my car..like the side ones...i can buy mine from an ex gf's mom...she had it on her gt but she sold the car....so she said she'd sell the lights to me for 50 bucks...

[neckbonekat]

Don't know much about the install but I found some pretty good prices on line.
http://www.brownsaftermarketpartsand...ge/3860903.htm