Just cut off the pony

~C~ · July 29th, 2009, 11:25 AM

So last evening, after a long debate with myself, i decided to chop off the pony in the grill. Some one swiped the actual pony from in there a while back, but the backing was left. Instead of getting a new one, I decided to just remove the backing.

I am still trying to decide if I like it or not, but for now, the change is a good one, so I am leaning towards letting it be. I will try to get a pic up soon. Just thought I would share.

Techniq · July 29th, 2009, 11:35 AM

I did the same.... no pony for me.

Lefty · July 29th, 2009, 12:08 PM

Put like a "281" badge in there or something

NorCalWhtHrse · July 29th, 2009, 08:17 PM

Originally Posted by Lefty

Put like a "281" badge in there or something

:-/ idk about that...

Techniq · July 29th, 2009, 08:28 PM

Neither do I.

Lefty · July 29th, 2009, 09:06 PM

Originally Posted by NorCalWhtHrse

:-/ idk about that...

Actually there's a couple of guys who have a square badge that has "281" in it on SVTP and it looks pretty good. They have it tinted with VHT; Trust me it looks purdy good.

AggieStang · July 29th, 2009, 10:11 PM

I think I might be doing some cutting a little later too.

On the car.

July 29th, 2009, 11:25 AM	#1
~C~ ~C~, The Other White Meat! Y2K YellowJacket GT ~TBD~ Join Date: Jun 2008 Location: West side B-More Posts: 1,710 iTrader: 2 reviews	Just cut off the pony So last evening, after a long debate with myself, i decided to chop off the pony in the grill. Some one swiped the actual pony from in there a while back, but the backing was left. Instead of getting a new one, I decided to just remove the backing. I am still trying to decide if I like it or not, but for now, the change is a good one, so I am leaning towards letting it be. I will try to get a pic up soon. Just thought I would share. __________________ BLOWN Bumblebeast! 370 rwhp / 381 ft lbs ~Tuned by JJ at WMS "Like the blind man says......We shall see...."

July 29th, 2009, 11:35 AM	#2
Techniq Regular 2004 Mustang Mach 1 Will Run After Build! Join Date: Nov 2008 Location: Belleview, FL Posts: 364 iTrader: 0 reviews	I did the same.... no pony for me. __________________ 5.0L Cast Iron block/Forged internals-Melling Oil Pump w/Billet Gears-BBK Twin 65mm Throttle Body-BBK Longtube Headers-BBK O/R "x" Pipe- Maganflow Cats-B&M Sport Short Throw-Eibach Drag-Launch Springs-And Some More...Hope to run new set-up soon.

July 29th, 2009, 12:08 PM	#3
Lefty The Doctor '01 Cobra Vert. Join Date: Jun 2007 Location: Mechanicsburg, PA Posts: 27,388 iTrader: 11 reviews	Put like a "281" badge in there or something __________________ 2008 Acura TL Type-S (the daily) 2006 Yamaha R6 50th Anniversary Edition (the other toy)

July 29th, 2009, 08:28 PM	#5
Techniq Regular 2004 Mustang Mach 1 Will Run After Build! Join Date: Nov 2008 Location: Belleview, FL Posts: 364 iTrader: 0 reviews	Neither do I. __________________ 5.0L Cast Iron block/Forged internals-Melling Oil Pump w/Billet Gears-BBK Twin 65mm Throttle Body-BBK Longtube Headers-BBK O/R "x" Pipe- Maganflow Cats-B&M Sport Short Throw-Eibach Drag-Launch Springs-And Some More...Hope to run new set-up soon.

July 29th, 2009, 10:11 PM	#7
AggieStang WHOOP! 2002 Mustang GT 7.44@95 (1/8) Join Date: Oct 2007 Location: TEXAS Posts: 3,128 iTrader: 3 reviews	I think I might be doing some cutting a little later too. On the car. __________________ Buy my: Nitrous Accessories Diablosport Programmer In The Classifieds

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Just cut off the pony
Thread	Thread Starter	Forum	Replies	Last Post
I got to cut something ... can I ?	BAzombie	96-98	3	April 11th, 2009 03:51 PM
had to cut	gooberhead320	The Clubhouse	7	January 6th, 2009 04:22 PM
has anyone ever CUT!!!!!!!!	show95stang	5.0 Mustangs	3	March 25th, 2008 01:21 AM
Y Cut-out	TheChariot9923	General Tech	11	March 14th, 2007 07:29 PM
Bumper Cut-Out	Texan_Stud	V6 Mustangs	2	February 5th, 2007 02:27 AM

All times are GMT -4. The time now is 03:13 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.