To nileppezdel77

pwrstrokedzl · April 19th, 2011, 08:20 PM

Originally Posted by nileppezdel77

Very cool! Welcome. So what are the goals for the car project?

I'm getting the 99-01 cobra front bumper cover to be different everybody does the 03-04. I'm keeping the GT hood and adding the GT scoop that came on the later cars. Then I'm putting black vinyl on the dip in the hood and on the scoop kinda like a mach 1 but without the shaker. For wheels I'm going with these wheels 18" Mustang Bullitt Replica Wheels -Anthracite Machined Lip-18x9-18x10-SET and a set of eibach sportlines. Also putting the scoops on the side from the later models. For the rear end I'm putting the black vinyl on the deck lid and blacking in the vent looking part on the front and rear bumpers. Oh and of course a new paint job! That's my plan so far I wish I was good with photo chop so I can try all this to see how it looks....

nileppezdel77! · April 20th, 2011, 12:48 AM

That sounds like it would look pretty good. I meant goals performance-wise though, lol. Only suggestion: Ditch the idea about the hood scoop, get a stock hood from an 01+ car; I've heard all sorts of horror stories about aftermarket scoops flying off at speed.

nileppezdel77! · April 20th, 2011, 12:51 AM

Oh yeah, and you could have just PM'ed me, lol.

pwrstrokedzl · April 23rd, 2011, 11:22 PM

I got my springs pro 5.0 shifter bullitt shift knob and the replacement for my burnt factory amp installed today. Car stance is perfect now just in need of wheels and tires!!!! On the scoop I am actually watching two factory ones on ebay I sure wasn't gonna put stick on anything on there I know better haha.

Bullitt shift knob....and is there a block off of any kind I can do for the traction control button? That shifter bezel is out of a cobra and my car didn't come with tc thanks for suggestion and ideas

April 20th, 2011, 12:48 AM	#2
nileppezdel77! Nile P. Pezdel of Pez Dispenser Inc. CCA 2001 Mustang GT Vert Join Date: Dec 2010 Location: Brooklyn Posts: 4,273 iTrader: 3 reviews	That sounds like it would look pretty good. I meant goals performance-wise though, lol. Only suggestion: Ditch the idea about the hood scoop, get a stock hood from an 01+ car; I've heard all sorts of horror stories about aftermarket scoops flying off at speed. __________________ SOME MODDED MUSTANG CREW

April 20th, 2011, 12:51 AM	#3
nileppezdel77! Nile P. Pezdel of Pez Dispenser Inc. CCA 2001 Mustang GT Vert Join Date: Dec 2010 Location: Brooklyn Posts: 4,273 iTrader: 3 reviews	Oh yeah, and you could have just PM'ed me, lol. __________________ SOME MODDED MUSTANG CREW

April 23rd, 2011, 11:22 PM	#4
pwrstrokedzl Newbie 1999 Mustang GT Join Date: Apr 2011 Location: Mississippi Posts: 4 iTrader: 0 reviews	I got my springs pro 5.0 shifter bullitt shift knob and the replacement for my burnt factory amp installed today. Car stance is perfect now just in need of wheels and tires!!!! On the scoop I am actually watching two factory ones on ebay I sure wasn't gonna put stick on anything on there I know better haha. Bullitt shift knob....and is there a block off of any kind I can do for the traction control button? That shifter bezel is out of a cobra and my car didn't come with tc thanks for suggestion and ideas __________________ 99 mustang GT...<--- Casper is a work in progress 4:10's ford racing aluminum drive shaft exhaust and sct with bama tuning is all for now paint job and body mods are next Last edited by pwrstrokedzl; April 23rd, 2011 at 11:29 PM.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 02:38 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.