New Edge Stripes

Maverick530 · July 26th, 2011, 08:47 PM

first i would like to say, its not as hard as people make it out to me,
but it does suck to do it by yourself. sooo i only did the hood and the upper part of the windshield. and then im going to get some help when my girlfriend gets back from vacation.
here are the pictures. its been raining for the past month everyday, so i did it in a big garage.

mcqueen · July 26th, 2011, 08:55 PM

Looks good. I love matte black decals on gloss black paint

B's04gt · July 26th, 2011, 09:16 PM

I would've done one thick strip down the middle with two little on each side. Saw it on a termi

Maverick530 · July 26th, 2011, 09:40 PM

ones its all done, assumming around in a week ill clean it and post better pictures, one think i learned was to not get the back of the paper wet, it will ruin a whole piece lol.

and i do have the pinstripes, but that seems like a bitch to put on, but i might do it lol.

im thinking about going all the way down the license plate and not going farther than that.

but since my third break like its VHTed i dont know if i want to even put the heat gun next to it

but taking it out is so damn hard

v6 stunna · July 26th, 2011, 10:43 PM

do it dark RED or RED pinstripe it!!

6ER THEN I 8ER! · July 26th, 2011, 11:09 PM

Originally Posted by B's04gt

I would've done one thick strip down the middle with two little on each side. Saw it on a termi

i've seen that on a few new edges...sexy look is sexy

@OP...always good to see matte on gloss

AzSonicSnake · July 26th, 2011, 11:18 PM

wow, that looks badass man. nice work.

B's04gt · July 26th, 2011, 11:22 PM

Originally Posted by 6ER THEN I 8ER

i've seen that on a few new edges...sexy look is sexy

@OP...always good to see matte on gloss

White cobra with the silver single stripe and the two on the outside.

tinkerbell_too · July 26th, 2011, 11:25 PM

Looks great!

Maverick530 · July 27th, 2011, 12:01 AM

when i do the stripes for the trunk, do you think it would be safe to put the heat gun next to the VHTed third break light.
what i do it i use the headgun then i push the vinyl in the cracks so it looks nice

tommy93 · July 28th, 2011, 04:21 AM

Originally Posted by Maverick530

ones its all done, assumming around in a week ill clean it and post better pictures, one think i learned was to not get the back of the paper wet, it will ruin a whole piece lol.

and i do have the pinstripes, but that seems like a bitch to put on, but i might do it lol.

im thinking about going all the way down the license plate and not going farther than that.

but since my third break like its VHTed i dont know if i want to even put the heat gun next to it
but taking it out is so damn hard

how is taking the 3rd brake light out hard...? ive done it many times... just held on by two 10mm bolts (granted you may need a deep socket) but still. EZ
the head gun will ruin your VHT'd light

Maverick530 · July 28th, 2011, 05:09 PM

i didnt have a deep socket when i had to take it out haha

a few bubbles are coming out now, but i figure there going to disappear in the 100 degree heat

July 26th, 2011, 08:47 PM	#1
Maverick530 Hardcore Enthusiast 2001 Mustang GT Vert Average Join Date: Jun 2010 Location: Lafayette Louisiana Posts: 2,404 iTrader: 0 reviews	New Edge Stripes first i would like to say, its not as hard as people make it out to me, but it does suck to do it by yourself. sooo i only did the hood and the upper part of the windshield. and then im going to get some help when my girlfriend gets back from vacation. here are the pictures. its been raining for the past month everyday, so i did it in a big garage.

July 26th, 2011, 10:43 PM	#5
v6 stunna Regular 2000 v6 Join Date: Jul 2010 Location: forgan ok Posts: 396 iTrader: 0 reviews	do it dark RED or RED pinstripe it!! __________________

July 26th, 2011, 11:18 PM	#7
AzSonicSnake 2009 ROTY 2003 SVT Cobra 11.07@127 Join Date: Aug 2008 Location: North Phoenix,AZ Posts: 5,640 iTrader: 1 reviews	wow, that looks badass man. nice work. __________________ MM Cobra Club #25 My Autolog Profile

July 26th, 2011, 11:25 PM	#9
tinkerbell_too Zippy's Resident Milf 2003 Mustang GT 2011 MM Chick of the Year February 2011 ROTM Join Date: Feb 2007 Location: Hampton, GA Posts: 4,895 iTrader: 1 reviews	Looks great! __________________ "Live with no regrets, treat people the way you want to be treated, work like you don't need the money, love like you've never been hurt, and dance like you do when nobody's watching"...

Threads Similar to: New Edge Stripes
Thread	Thread Starter	Forum	Replies	Last Post
anyone have stripes on your new edge?	Maverick530	The Clubhouse	4	July 10th, 2011 06:43 PM
Black Stripes on Yellow New Edge	Runriot	99-04	25	February 24th, 2011 12:34 AM
Stripes or No Stripes That is the question	Swatter32	V6 Mustangs	11	September 21st, 2010 10:47 AM
need opinions. stripes or no stripes	energiesource	The Clubhouse	42	August 10th, 2010 11:58 PM
289 into new edge	ford6693	99-04	44	September 16th, 2009 10:06 PM

July 26th, 2011, 09:40 PM	#4
Maverick530 Hardcore Enthusiast 2001 Mustang GT Vert Average Join Date: Jun 2010 Location: Lafayette Louisiana Posts: 2,404 iTrader: 0 reviews	ones its all done, assumming around in a week ill clean it and post better pictures, one think i learned was to not get the back of the paper wet, it will ruin a whole piece lol. and i do have the pinstripes, but that seems like a bitch to put on, but i might do it lol. im thinking about going all the way down the license plate and not going farther than that. but since my third break like its VHTed i dont know if i want to even put the heat gun next to it but taking it out is so damn hard

July 27th, 2011, 12:01 AM	#10
Maverick530 Hardcore Enthusiast 2001 Mustang GT Vert Average Join Date: Jun 2010 Location: Lafayette Louisiana Posts: 2,404 iTrader: 0 reviews	when i do the stripes for the trunk, do you think it would be safe to put the heat gun next to the VHTed third break light. what i do it i use the headgun then i push the vinyl in the cracks so it looks nice

July 28th, 2011, 05:09 PM	#12
Maverick530 Hardcore Enthusiast 2001 Mustang GT Vert Average Join Date: Jun 2010 Location: Lafayette Louisiana Posts: 2,404 iTrader: 0 reviews	i didnt have a deep socket when i had to take it out haha a few bubbles are coming out now, but i figure there going to disappear in the 100 degree heat

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 04:21 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.