Water in Headlights

Zatrekaz · June 23rd, 2008, 12:21 AM

I just got some black headlights from Ebay. The bulbs fit in them but not VERY secure( VVME HID kit). I am getting bad moister and water buildup in the passenger side, and some in the driver side.

The passenger turn signal is lose, could this be my problem? I cant get it to secure because part of the tab on the housing is broke that holds it in.

Whats the best way to get these bulbs to fit good and keep the water out? Keep in mind its HID bulbs, so I cant use the retainng clip that screws on. Thanks !

R3dFyre02 · June 23rd, 2008, 02:08 AM

a thin ring of silicone sealant? might make it a bitch to take them off, but it should hold them in good and snug as well as seal it all up for ya.

Zatrekaz · June 23rd, 2008, 03:01 AM

Tryed it on the HID, and it gets to hot. It made it smoke inside the headlight.

As for the turn signal, I could try doin that. I think putting a good layer of liquid electrical tape all around it would work good to.

June 23rd, 2008, 12:21 AM	#1
Zatrekaz Regular 2003 Mustang V6 17.00@slow Join Date: Aug 2007 Location: Mississippi Posts: 417	Water in Headlights I just got some black headlights from Ebay. The bulbs fit in them but not VERY secure( VVME HID kit). I am getting bad moister and water buildup in the passenger side, and some in the driver side. The passenger turn signal is lose, could this be my problem? I cant get it to secure because part of the tab on the housing is broke that holds it in. Whats the best way to get these bulbs to fit good and keep the water out? Keep in mind its HID bulbs, so I cant use the retainng clip that screws on. Thanks ! __________________ 18" Chrome Saleens w/ Nexen Tires O/R H-Pipe w/ Flowmaster 40s Mach1 Grill Delete MSD 8.5mm wires Cold Air Intake 10k HIDs Coming soon! Lowering and new paint !

June 23rd, 2008, 03:01 AM	#3
Zatrekaz Regular 2003 Mustang V6 17.00@slow Join Date: Aug 2007 Location: Mississippi Posts: 417	Tryed it on the HID, and it gets to hot. It made it smoke inside the headlight. As for the turn signal, I could try doin that. I think putting a good layer of liquid electrical tape all around it would work good to. __________________ 18" Chrome Saleens w/ Nexen Tires O/R H-Pipe w/ Flowmaster 40s Mach1 Grill Delete MSD 8.5mm wires Cold Air Intake 10k HIDs Coming soon! Lowering and new paint !

Threads Similar to: Water in Headlights
Thread	Thread Starter	Forum	Replies	Last Post
water pump	99blkcobra	4V / SVT	23	May 27th, 2008 05:10 PM
Water	mpboy	5.0 Mustangs	8	January 18th, 2008 12:38 PM
water pump?	02gtbangstang	Engine	0	January 12th, 2008 12:38 AM
water spots	ByPopularDemand	V6 Mustangs	28	June 10th, 2007 05:55 PM
water pump	95wip	94-95	6	May 23rd, 2007 09:03 AM

June 23rd, 2008, 02:08 AM	#2
R3dFyre02 Regular Join Date: Aug 2007 Posts: 177	a thin ring of silicone sealant? might make it a bitch to take them off, but it should hold them in good and snug as well as seal it all up for ya.

All times are GMT -4. The time now is 07:36 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.