Coin Holder Switches..

Forums at Modded Mustangs

Mark Forums Read

		Forums at Modded Mustangs > Mustang Forums > General Tech > Visual
Coin Holder Switches..

Discussing Coin Holder Switches.. in the Visual Forum. I've installed subs as well as a set of LED's over the past ...

Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free!

August 2nd, 2008, 10:54 PM	#1
Archy88 Regular Join Date: Sep 2007 Location: USA Posts: 131	Coin Holder Switches.. I've installed subs as well as a set of LED's over the past few months, so I decided to install a kill switch for both... I ordered a coin delete from ebay which ended up being too difficult to manipulate. So I traced the figure onto the bottom of an aluminum can & went to the grinding wheel. The shape came out great, but the quality is pretty bad. Either way, it was a fun weekend project! On a side note, does anyone know of a shop/person that would be capable of drilling out two significant size holes from a coin delete? The piece I have now is pretty dented...and needs to eventually be replaced. Or how about a material that would be thin enough to look good in that small gap, but be strong enough to withstand denting/warping? Thanks! Attached Thumbnails __________________

August 2nd, 2008, 11:10 PM	#2
AndrewA. Hardcore Enthusiast 2001 Mustang GT 8.9@78 Join Date: Jul 2007 Location: DFW Texas Posts: 1,258	That looks kinda cool..it would be cooler if those where for n02 tho __________________ Fire it up, burn it down.

August 2nd, 2008, 11:55 PM	#3
Squints Enthusiast 1986 Mustang GT Join Date: Dec 2007 Location: Chesapecker,VA Posts: 675	drill the holes before you cut the piece out. it'll make it a lot easier to drill and you probably won't eff it up as much. i think it' looks fine like it is though and, use some ABS plastic. it won't dent like aluminum. __________________ MILITARY CREW AT3 Last edited by Squints : August 2nd, 2008 at 11:57 PM.

August 2nd, 2008, 11:55 PM	#4
Archy88 Regular Join Date: Sep 2007 Location: USA Posts: 131	LOL, thats the criticism I got all weekend. "Dude, whats the point?" Meh, down the road I can have it turn on my amps AND my n02...make for a rocking good time! Good idea on drilling it before I cut it out. "Do you know what I did this summer!?"...kinda weird you knew what I did. lmao __________________ Last edited by Archy88 : August 2nd, 2008 at 11:58 PM.

August 11th, 2008, 03:51 PM	#5
my_2000stang Regular 2000 Mustang V6 Join Date: Aug 2007 Location: Wisconsin Posts: 73	yea i put my subs hook up and LED lights switches right in the coin holder holes too. Works like a charm and is perfect spot for the switches. __________________ THe GREEN MACHINE ~BAD BOY CLUB~

August 11th, 2008, 11:37 PM	#6
Archy88 Regular Join Date: Sep 2007 Location: USA Posts: 131	Do you have a picture?? Curious how yours looks compared to mine __________________

August 12th, 2008, 02:09 PM	#7
my_2000stang Regular 2000 Mustang V6 Join Date: Aug 2007 Location: Wisconsin Posts: 73	yea i can get ya a pic once i get my car back, just got some fresh new paint on her, so still in the shop. __________________ THe GREEN MACHINE ~BAD BOY CLUB~

Reply

Thread Tools
Show Printable Version Email this Page

Threads Similar to: Coin Holder Switches..
Thread	Thread Starter	Forum	Replies	Last Post
Coin Melts	JASonic	The Clubhouse	26	June 15th, 2008 06:40 PM
coin holder delete	tom2000r	99-04	6	March 19th, 2008 08:52 PM
coin holder	tom2000r	99-04	2	February 29th, 2008 08:08 PM
looking for Coin Delete	Badasstang281	99-04	5	June 21st, 2007 04:13 AM
Coin holder delete	Timber	99-04	13	April 3rd, 2007 08:01 PM