WTB - 96 to 98 Parts

96greenGT · November 17th, 2006, 10:26 AM

i need a timing cover from a 96 GT SOHC as mine will not work with my newer setup, also looking for an 8 bolt hole flywheel and left 13 bolt hole valve cover and oil pan with hole for the low oil level sensor. let me know if anyone has the above listed for sale, thanks !

loudenough · November 17th, 2006, 11:29 AM

weld a bung in your oil pan and save some cash unless you don`t have one or yours is trashed but its just a thought

96greenGT · November 17th, 2006, 12:17 PM

i never thought of that!!! and i weld too, i just need to see if the threads from an 02 bung are the same as the sensor thread.

loudenough · November 17th, 2006, 02:40 PM

you can find tons of places that make all kinds of thread types.I have done this to so many Ford pans to take a dip stick

loudenough · November 17th, 2006, 02:41 PM

is that a flywheel you need or a flexplate? some call it the same name

I have a flexplate 164tooth

96greenGT · November 17th, 2006, 04:45 PM

it's actually a pressure plate, mine is a 5 speed, ford's part number is 5R3Z-7563-A. so it will not only have the ring gear for the starter to turn the engine over, but a flat surface for the clutch disc to ride on.

loudenough · November 17th, 2006, 05:10 PM

sorry I can`t help I run autos as manuals with on the wheel up and down shifts

November 17th, 2006, 10:26 AM	#1
96greenGT Newbie Join Date: Oct 2006 Posts: 29	WTB - 96 to 98 Parts i need a timing cover from a 96 GT SOHC as mine will not work with my newer setup, also looking for an 8 bolt hole flywheel and left 13 bolt hole valve cover and oil pan with hole for the low oil level sensor. let me know if anyone has the above listed for sale, thanks !

Threads Similar to: WTB - 96 to 98 Parts
Thread	Thread Starter	Forum	Replies	Last Post
94 GT PARTS	sn94	Want to Buy	0	October 7th, 2007 10:41 PM
85 v6 parts	5mustang0	V6 Mustangs	8	June 2nd, 2007 08:23 PM
i need parts.	5.0guy	5.0 Mustangs	5	December 2nd, 2006 12:21 AM
Where to get parts	Wilson00V6	V6 Mustangs	18	November 28th, 2006 08:21 PM
Parts reviews for aftermarket mustang parts...	topflitecop21	Modular Mustangs	0	August 10th, 2006 10:21 PM

November 17th, 2006, 11:29 AM	#2
loudenough Regular Join Date: Jul 2006 Location: Ontario Posts: 194	weld a bung in your oil pan and save some cash unless you don`t have one or yours is trashed but its just a thought

November 17th, 2006, 12:17 PM	#3
96greenGT Newbie Join Date: Oct 2006 Posts: 29	i never thought of that!!! and i weld too, i just need to see if the threads from an 02 bung are the same as the sensor thread.

November 17th, 2006, 02:40 PM	#4
loudenough Regular Join Date: Jul 2006 Location: Ontario Posts: 194	you can find tons of places that make all kinds of thread types.I have done this to so many Ford pans to take a dip stick

November 17th, 2006, 02:41 PM	#5
loudenough Regular Join Date: Jul 2006 Location: Ontario Posts: 194	is that a flywheel you need or a flexplate? some call it the same name I have a flexplate 164tooth

November 17th, 2006, 04:45 PM	#6
96greenGT Newbie Join Date: Oct 2006 Posts: 29	it's actually a pressure plate, mine is a 5 speed, ford's part number is 5R3Z-7563-A. so it will not only have the ring gear for the starter to turn the engine over, but a flat surface for the clutch disc to ride on.

November 17th, 2006, 05:10 PM	#7
loudenough Regular Join Date: Jul 2006 Location: Ontario Posts: 194	sorry I can`t help I run autos as manuals with on the wheel up and down shifts

All times are GMT -4. The time now is 08:36 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.