Cheapest place to buy K member kit for FF on3 kit??? - Forums at Modded Mustangs
Reply
 
LinkBack Thread Tools
post #1 of 22 Old September 28th, 2013, 11:53 AM Thread Starter
Enthusiast
 
Black2vConvertible's Avatar
 
Join Date: Jul 2011
Location: Clearwater, FL
Posts: 595
 
iTrader: 0 reviews
Cheapest place to buy K member kit for FF on3 kit???

Ok guys so I'm just kinda like.. FUCK THE BULLSHIT!


I've been slacking for too long and I'm NOW ready to buy my K member kit for the front end of the car...

Now.. I believe and correct me if I'm wrong that the on3 kit was built around the Qa1 k member however I know most people usually go with UPR...

However.... All I know is that I'm ready to pull the trigger on the front suspension components so that I can go ahead and get that portion of the build done and over with so that I can hurry up and move onto the supporting fuel mods!!!

-maf
-fuel injectors
-fuel pump (or pumps lol)


Of course I will still need a good tune as well... and I plan on buying a electronic boost controller as well so that I can control the boost a bit better than a spring that could potentially spike and put out more boost levels than I want the stock block to take but ya... we'll worry about that later.

I just want to get this thing done and over with!!


Rep's to any/all responses including a good source for a full kit!
Black2vConvertible is offline  
Sponsored Links
Advertisement
 
post #2 of 22 Old September 28th, 2013, 12:44 PM
Hardcore Enthusiast
 
xandraxal's Avatar
 
Join Date: Mar 2012
Location: florida
Posts: 2,958
             
iTrader: 0 reviews
I have UPR, bought straight from them

96 GT turbocharged - SOLD
97 Cobra vert stock -SOLD
xandraxal is offline  
post #3 of 22 Old September 28th, 2013, 12:52 PM
Hardcore Enthusiast
 
02TrickFlowGT's Avatar
 
Join Date: Oct 2011
Location: Austin
Posts: 2,177
   
iTrader: 1 reviews
I want to go turbo, especially when I see his numbers on 9psi..^^ I shoulda done that instead on the centri

---------- Post added at 11:52 AM ---------- Previous post was at 11:52 AM ----------

I feel like the install is difficult tho and would bring many issues for a DD

Built, Forged, 5litre, Turbo cams, Turbo comming soon!
02TrickFlowGT is offline  
Sponsored Links
Advertisement
 
post #4 of 22 Old September 28th, 2013, 01:55 PM
Regular
 
shadows's Avatar
 
Join Date: Dec 2010
Location: Houston, Texas
Posts: 128
 
iTrader: 1 reviews
Quote:
Originally Posted by 02TrickFlowGT View Post
I want to go turbo, especially when I see his numbers on 9psi..^^ I shoulda done that instead on the centri

---------- Post added at 11:52 AM ---------- Previous post was at 11:52 AM ----------

I feel like the install is difficult tho and would bring many issues for a DD
Not at all, I thought the same before I started but the install of the k member and turbo kit is actually very straightforward.

To the OP, just get the upr k member directly from them
shadows is offline  
post #5 of 22 Old September 28th, 2013, 02:26 PM Thread Starter
Enthusiast
 
Black2vConvertible's Avatar
 
Join Date: Jul 2011
Location: Clearwater, FL
Posts: 595
 
iTrader: 0 reviews
I would still need castor camber plates but would this work???

96-04 Mustang QA-1 K-Member Kit
Black2vConvertible is offline  
post #6 of 22 Old September 28th, 2013, 04:16 PM
Hardcore Enthusiast
 
xandraxal's Avatar
 
Join Date: Mar 2012
Location: florida
Posts: 2,958
             
iTrader: 0 reviews
Personally I wouldn't put anything qa1 on my car. Just a personal opinion

96 GT turbocharged - SOLD
97 Cobra vert stock -SOLD
xandraxal is offline  
post #7 of 22 Old September 28th, 2013, 04:39 PM Thread Starter
Enthusiast
 
Black2vConvertible's Avatar
 
Join Date: Jul 2011
Location: Clearwater, FL
Posts: 595
 
iTrader: 0 reviews
Thinking this one would be my best bet...

96-04 Ford Mustang Tubular Chrome Moly K Member Kit
Black2vConvertible is offline  
post #8 of 22 Old September 28th, 2013, 05:32 PM
Banned
 
Join Date: Dec 2011
Posts: 10,319
       
iTrader: 1 reviews
UPR. You also can get a forum discount if you are on corral. 6% discount so you get like 30 bucks off.

Sent from AutoGuide.com Free App
gravik is offline  
post #9 of 22 Old September 28th, 2013, 05:38 PM
Enthusiast
 
02gt2v's Avatar
 
Join Date: Sep 2011
Location: va
Posts: 869
 
iTrader: 0 reviews
I bought mine from upr and got a 10% off coupon online.

Go turbo, don't look back.
02gt2v is offline  
post #10 of 22 Old September 28th, 2013, 06:56 PM Thread Starter
Enthusiast
 
Black2vConvertible's Avatar
 
Join Date: Jul 2011
Location: Clearwater, FL
Posts: 595
 
iTrader: 0 reviews
That's whats up!

Ok so I'm wanting to buy this k member kit... real quick though... What spring rates should I be looking into???


12-250

or...

12-350

or...

14-130
14-150
14-175
Black2vConvertible is offline  
post #11 of 22 Old September 28th, 2013, 06:59 PM
Banned
 
Join Date: Dec 2011
Posts: 10,319
       
iTrader: 1 reviews
Will it be a track car or a daily driver/street car? I went with 12-250 because my car is 99% street car.
gravik is offline  
post #12 of 22 Old September 28th, 2013, 07:01 PM Thread Starter
Enthusiast
 
Black2vConvertible's Avatar
 
Join Date: Jul 2011
Location: Clearwater, FL
Posts: 595
 
iTrader: 0 reviews
daily driver but I want to be able to hook well and have good weight transfer... I don't care about turns. lol..
Black2vConvertible is offline  
post #13 of 22 Old September 28th, 2013, 08:44 PM
Hardcore Enthusiast
 
BAzombie's Avatar
 
Join Date: Nov 2008
Location: Queensbury, NY
Posts: 1,600
         
Garage
iTrader: 0 reviews
Glad to see you're going to finish it.

You want UPR not QA1. I went thru LMR when I got mine. The one you linked from UPR is the same so I'd go with where ever you can get the biggest discount.



Quote:
Originally Posted by xkape View Post
I like MM though. It's a mustang forum, and, the only one I know of where I could tell you to fuck off.. or to suck my dick. Or, to tell you you have a small penis or that I fucked your mom last night and it's ok.
BAzombie is offline  
post #14 of 22 Old September 28th, 2013, 08:49 PM
Hardcore Enthusiast
 
xandraxal's Avatar
 
Join Date: Mar 2012
Location: florida
Posts: 2,958
             
iTrader: 0 reviews
Street car you probably want 12-250

96 GT turbocharged - SOLD
97 Cobra vert stock -SOLD
xandraxal is offline  
post #15 of 22 Old September 29th, 2013, 09:55 PM
Regular
 
Join Date: Dec 2011
Location: Stephenville TX
Posts: 462
 
iTrader: 9 reviews
Call this guy. Sold me one for 675 shipped.

919-593-8424

Same guy I told you to call like a year ago when you bought the on3 kit to begin with
ktm300hater is offline  
post #16 of 22 Old October 1st, 2013, 04:40 AM
Hardcore Enthusiast
 
BAzombie's Avatar
 
Join Date: Nov 2008
Location: Queensbury, NY
Posts: 1,600
         
Garage
iTrader: 0 reviews
Had to dig to page 5 to find this thread.

Black, Time to get rockin'. Here's a little teaser for ya.



1st - 3rd pull




Quote:
Originally Posted by xkape View Post
I like MM though. It's a mustang forum, and, the only one I know of where I could tell you to fuck off.. or to suck my dick. Or, to tell you you have a small penis or that I fucked your mom last night and it's ok.
BAzombie is offline  
post #17 of 22 Old October 12th, 2013, 11:55 AM Thread Starter
Enthusiast
 
Black2vConvertible's Avatar
 
Join Date: Jul 2011
Location: Clearwater, FL
Posts: 595
 
iTrader: 0 reviews
Quote:
Originally Posted by ktm300hater View Post
Call this guy. Sold me one for 675 shipped.

919-593-8424

Same guy I told you to call like a year ago when you bought the on3 kit to begin with
What's his name? is he associated with a company or something?

---------- Post added at 11:55 AM ---------- Previous post was at 11:53 AM ----------

Quote:
Originally Posted by BAzombie View Post
Had to dig to page 5 to find this thread.

Black, Time to get rockin'. Here's a little teaser for ya.



1st - 3rd pull

1st 3rd - YouTube
SIck video!

I'm getting ready to buy the k member kit now... Going to go with the UPR but want to find the best deal possible before I click the purchase button...
Black2vConvertible is offline  
post #18 of 22 Old October 12th, 2013, 12:03 PM
Hardcore Enthusiast
 
BAzombie's Avatar
 
Join Date: Nov 2008
Location: Queensbury, NY
Posts: 1,600
         
Garage
iTrader: 0 reviews
You'll see. Just got to finish your project.

You're lucky enough to get to drive your car year round. Mine will be going up for the winter in a few weeks. Already getting temps down into the 30's at night here.



Quote:
Originally Posted by xkape View Post
I like MM though. It's a mustang forum, and, the only one I know of where I could tell you to fuck off.. or to suck my dick. Or, to tell you you have a small penis or that I fucked your mom last night and it's ok.
BAzombie is offline  
post #19 of 22 Old October 12th, 2013, 12:15 PM Thread Starter
Enthusiast
 
Black2vConvertible's Avatar
 
Join Date: Jul 2011
Location: Clearwater, FL
Posts: 595
 
iTrader: 0 reviews
Quote:
Originally Posted by BAzombie View Post
You'll see. Just got to finish your project.

You're lucky enough to get to drive your car year round. Mine will be going up for the winter in a few weeks. Already getting temps down into the 30's at night here.
Hell ya! uh... I think it was in the low 70's last night... with low humidity it felt like atleast...

But ya the car runs great in this weather... can't wait for winter's 50-60 degree days! lol

Can't wait to drive the car in the cool weather this winter boosted!
Black2vConvertible is offline  
post #20 of 22 Old October 12th, 2013, 12:18 PM
Wiser by the Minute
 
aluv4speed's Avatar
 
Join Date: May 2010
Location: West Burbs Chicago IL
Posts: 1,498
 
iTrader: 1 reviews
Quote:
Originally Posted by BAzombie View Post
You'll see. Just got to finish your project.

You're lucky enough to get to drive your car year round. Mine will be going up for the winter in a few weeks. Already getting temps down into the 30's at night here.

Just curious why you didn't hit higher numbers with your ON3 system? Was it fuel? You have a built shortblock and heads. I made 489 on stock heads and cams with a KB 15psi. I am building on ON3 kit now and was hoping to make more than I made with the KB.

---------- Post added at 11:18 AM ---------- Previous post was at 11:17 AM ----------

** Also from what I heard a boost controller will potentially give you more chance of boost spike than going with the closest spring to the boost you want and using the boost controller to get the couple PSI you need. someone correct me if I am wrong.

** Get the UPR. This is what I have. Fit great. I haven't put the kit on yet though.

" Drive Fast - Take Risks "
On3 2nd gen kit, 78/68 Benita, E85, - 628/654 16psi | 677/695 18psi {Just swapped in the Edelbrock, 6061 plenum, 75mm tb, & 4" intercooler} Need new tune.
aluv4speed is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Forums at Modded Mustangs forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome