The Turbo Build Has Begun - Page 250 - Forums at Modded Mustangs
 117Likes
Reply
 
LinkBack Thread Tools
post #4981 of 5059 Old December 21st, 2018, 07:36 PM
Hardcore Enthusiast
 
Snorky's Avatar
 
Join Date: May 2010
Location: NJ
Posts: 1,439
     
Garage
iTrader: 1 reviews
Are the smaller turbos vs racing? If so, can i see more of those? Concerned about vs racing quality before i get one.

Mmr900 4.75 striker. Stock heads, CMS stage 2 turbo cams, on3 67mm ball bwaring billet wheel turbo kit @12.7 psi
539 rwhp / 601 rwtq

Snorky is offline  
Sponsored Links
Advertisement
 
post #4982 of 5059 Old December 25th, 2018, 09:14 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,568
                     
iTrader: 9 reviews
Quote:
Originally Posted by Snorky View Post
Are the smaller turbos vs racing? If so, can i see more of those? Concerned about vs racing quality before i get one.
Yes they are i opted for the dual ball bearing Billet VS racing units. The last turbo performed very well I would assume these will do the same once i get started on the car again. As you can see from this PIC i am very close to starting on the car again probably less then 3 weeks. Acid wash and Stain is next on the agenda after I install the garage doors.



Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #4983 of 5059 Old December 26th, 2018, 09:54 PM
I Post Entirely Way Too Much
 
Froush's Avatar
 
Join Date: May 2011
Location: Jackson, Mi
Posts: 5,175
                   
iTrader: 8 reviews
Id post pictures of mine but i cant figure out my photobucket password. Lol. I have the same turbos but powdercoated wrinkle black

"Happiness is being blown and stroked at the same time"
V6 => Teksid 302 stroker
Caitlyn Jenner swapped
My Build Thread click link
https://www.moddedmustangs.com/forums...shs-build.html
Froush is offline  
Sponsored Links
Advertisement
 
post #4984 of 5059 Old December 27th, 2018, 11:26 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,568
                     
iTrader: 9 reviews
Quote:
Originally Posted by Froush View Post
Id post pictures of mine but i cant figure out my photobucket password. Lol. I have the same turbos but powdercoated wrinkle black
Youll be running before I am but i will be back on the road before spring hits.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #4985 of 5059 Old January 19th, 2019, 03:22 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,568
                     
iTrader: 9 reviews
Finally finished up my garage/ Workshop I got a 2 post lift to go in but i got done so fast the concrete still isnt settled in enough to install the lift but anyhow Im rolling along its time for this twin turbo build I pretty much have everything to finish with the exception of the hot side i cannot decided if I want front mount in bumper or engine mount. Thoughts on which way to go?

98SnakeHorse, PULMEOVR and Ares like this.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #4986 of 5059 Old January 19th, 2019, 07:44 PM
Newbie
 
Ares's Avatar
 
Join Date: Feb 2017
Location: Pittsburgh, PA
Posts: 43
 
Garage
iTrader: 0 reviews
Ok that is a nice looking garage.

Ed...
2004 Dodge Ram 1500 4x4, 5.7 Hemi, 35" tires, daily ride
1984 Mustang GT350 Vert, 351w project
2004 Mustang GT - Comp Orange/5speed Best 1/4 [email protected], 1/8 [email protected], 1.57 60' - Best 60' 1.51, just a NA 2v, 320rwhp/326rwtq
Ares is offline  
post #4987 of 5059 Old January 19th, 2019, 09:05 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,568
                     
iTrader: 9 reviews
Quote:
Originally Posted by Ares View Post
Ok that is a nice looking garage.
Thank You sir, Its been a long time coming Im thankful for my other garage but it was getting a little tight in there.

Im ready to get back started on this car and see what a set of twin tuurbos can do on it. I know Y2K seems to like running them and has put together a nice setup so Im going to give it a shot as well. Im pretty sure Froush is going to be coming out the gate with a pretty nasty twin turbo car as well this year.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #4988 of 5059 Old January 19th, 2019, 09:54 PM
Enthusiast
 
Join Date: Jan 2013
Location: Colbert Ga.
Posts: 614
 
iTrader: 6 reviews
Send a message via Yahoo to EDDIEDOVER
AWESOME garage good luck on this round hope it puts down numbers you expect
EDDIEDOVER is online now  
post #4989 of 5059 Old January 19th, 2019, 10:08 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,568
                     
iTrader: 9 reviews
AWESOME garage good luck on this round hope it puts down numbers you expect

Thanks Eddie im pretty sure this time I am heading in the right direction.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #4990 of 5059 Old January 21st, 2019, 01:00 PM
Hardcore Enthusiast
 
98SnakeHorse's Avatar
 
Join Date: Jul 2010
Location: Southeast Iowa
Posts: 1,576
 
Garage
iTrader: 1 reviews
Wow great looking garage. Love the tall ceilings and flooring


1998 Mustang Cobra [Sold]
2000 Mustang Gt Built/Blown [Sold]

1995 Mustang Gt Built/Turbo [Part-Out]
1998 Mustang Gt Built 2v / Vortech V3 (Budget Blue)
98SnakeHorse is offline  
post #4991 of 5059 Old January 21st, 2019, 07:06 PM
Newbie
 
porterhousestk's Avatar
 
Join Date: Dec 2017
Location: Austin, Tx
Posts: 22
 
Garage
iTrader: 0 reviews
Awesome car, and awesome garage! Good luck with getting it all set up!


@porterhousestk #piinkiesout
porterhousestk is offline  
post #4992 of 5059 Old January 21st, 2019, 11:33 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,568
                     
iTrader: 9 reviews
Quote:
Originally Posted by 98SnakeHorse View Post
Wow great looking garage. Love the tall ceilings and flooring
Thank You it sucked ass hanging dry wall up there i ended up buying a dy wall hanging machine.

Quote:
Originally Posted by porterhousestk View Post
Awesome car, and awesome garage! Good luck with getting it all set up!
Thanks ive got one more thing to do I have already started back on the car but ill pause this weekend for a lift install if it makes it.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #4993 of 5059 Old February 16th, 2019, 04:17 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,568
                     
iTrader: 9 reviews
Im back, Garage is done gotta wait till april to install lift due to concrete not being old enough But ive decided to rock out the car anyhow.. I will be installing the engine next weekend and should have the car up and running in maybe 2-3 weeks. I went with a twin kit that is bumper mounted from on3 with my own turbos WGs and BOVS.. Ill start Posting some PICS of the new motor setup and turbo setup Late next week.



Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #4994 of 5059 Old February 20th, 2019, 06:27 PM
Hardcore Enthusiast
 
Snorky's Avatar
 
Join Date: May 2010
Location: NJ
Posts: 1,439
     
Garage
iTrader: 1 reviews
Quote:
Originally Posted by SSG Pate View Post
Im back, Garage is done gotta wait till april to install lift due to concrete not being old enough But ive decided to rock out the car anyhow.. I will be installing the engine next weekend and should have the car up and running in maybe 2-3 weeks. I went with a twin kit that is bumper mounted from on3 with my own turbos WGs and BOVS.. Ill start Posting some PICS of the new motor setup and turbo setup Late next week.

looking forward to this!

Mmr900 4.75 striker. Stock heads, CMS stage 2 turbo cams, on3 67mm ball bwaring billet wheel turbo kit @12.7 psi
539 rwhp / 601 rwtq

Snorky is offline  
post #4995 of 5059 Old February 21st, 2019, 12:31 AM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,568
                     
iTrader: 9 reviews
Thanks Snorky Since im waiting on a oil pickup tube i started mocking up the intercooler and turbos.. Had to move the condensor forward as well as the radiator so it toook me most of the night just to mock up the inter cooler. Tomorrow night ill finish up the intercooler install and get the headers and such installed on the motor.













And a PIC of my 19 5.0 LOL just had it cermaic coated with Gtechniq and plan on getting the 2V done soon as she gets running in a couple weeks.

y2k02 likes this.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #4996 of 5059 Old February 23rd, 2019, 01:09 AM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,568
                     
iTrader: 9 reviews
tonight I got a good part of the inter cooler finished and the transmission coolers relocated to the front of the car shit is taking 10X longer then I thought. Hopefully Monday night Ill get the motor in after my pickup tube arrives. I also moddified a on3 4V coolant inlet to work with the 2V i may remodify it if I run out of shit to do this weekend.





Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
1[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #4997 of 5059 Old February 23rd, 2019, 04:04 PM
Hardcore Enthusiast
 
Snorky's Avatar
 
Join Date: May 2010
Location: NJ
Posts: 1,439
     
Garage
iTrader: 1 reviews
That looks great! Are you going to run power steering?

Mmr900 4.75 striker. Stock heads, CMS stage 2 turbo cams, on3 67mm ball bwaring billet wheel turbo kit @12.7 psi
539 rwhp / 601 rwtq

Snorky is offline  
post #4998 of 5059 Old February 23rd, 2019, 11:05 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,568
                     
iTrader: 9 reviews
Quote:
Originally Posted by Snorky View Post
That looks great! Are you going to run power steering?
Yes sir, I am thinking about running it through my radiator where the trans cooler used to run through. I have to research and see if the TEMP the radiator runs at is hotter or cooler then the PS system fluids normal TEMP. But it would be best for me to run it through there if I could.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #4999 of 5059 Old February 24th, 2019, 03:09 PM
Hardcore Enthusiast
 
Snorky's Avatar
 
Join Date: May 2010
Location: NJ
Posts: 1,439
     
Garage
iTrader: 1 reviews
That will be an interesting experiment, i have been wanting to mount the on3 power steering cooler. I just havent gotten creative enough or really taken the timeto figure how to mount it effectively. My PS fluid burns, turns black.

Mmr900 4.75 striker. Stock heads, CMS stage 2 turbo cams, on3 67mm ball bwaring billet wheel turbo kit @12.7 psi
539 rwhp / 601 rwtq

Snorky is offline  
post #5000 of 5059 Old February 24th, 2019, 10:46 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,568
                     
iTrader: 9 reviews
I got the fitting installed for the PS relocation Its coming in the transmission cooler on the radiator and making a loop just like the POS factory one. The fluid capacity will double or triple because it will have to fill up the radiator cavity as well so this has to be good for the system.





I should be installing the engine in a couple days I just have to get this small stuff taken care of first.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Forums at Modded Mustangs forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



  LinkBacks (?)
LinkBack to this Thread: https://www.moddedmustangs.com/forums/96-04/336618-turbo-build-has-begun.html
Posted By For Type Date
My "re" build thread - Trick flow/turbo build - Page 3 - Ford Mustang Forums : Corral.net Mustang Forum This thread Refback July 9th, 2016 08:34 PM
Thread The Turbo build has begun | Forums at Modded Mustangs | BoardReader This thread Refback December 1st, 2015 01:31 AM
kurgan motorsports | BoardReader This thread Refback February 3rd, 2015 08:14 PM
The Turbo build has begun - Page 66 This thread Refback December 3rd, 2014 12:02 AM
UPR cracked | BoardReader This thread Refback March 27th, 2014 06:50 PM
UPR customer service | BoardReader This thread Refback March 27th, 2014 06:01 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome