The Turbo Build Has Begun - Page 253 - Forums at Modded Mustangs
 117Likes
Reply
 
LinkBack Thread Tools
post #5041 of 5062 Old March 19th, 2019, 05:10 PM
Hardcore Enthusiast
 
Snorky's Avatar
 
Join Date: May 2010
Location: NJ
Posts: 1,439
     
Garage
iTrader: 1 reviews
525 rwhp on a stock motor??! I find that a bit farfetched, not impossible.. just very improbable. A tune can help solve for piston melting issues.. but it cannot solve the equation for a powdered rod cracking in half and making a viewing port in the side of the block. Or the piston skirt cracking off and ending up in your oil pan. That is 100% pressure/power and rpm related.

Mmr900 4.75 striker. Stock heads, CMS stage 2 turbo cams, on3 67mm ball bwaring billet wheel turbo kit @12.7 psi
539 rwhp / 601 rwtq

Snorky is offline  
Sponsored Links
Advertisement
 
post #5042 of 5062 Old March 19th, 2019, 05:59 PM
Carving corners
 
MineralGreyGT's Avatar
 
Join Date: Jun 2007
Location: DartsMouth, MA
Posts: 3,327
           
iTrader: 18 reviews
Quote:
Originally Posted by Snorky View Post
525 rwhp on a stock motor??! I find that a bit farfetched, not impossible.. just very improbable. A tune can help solve for piston melting issues.. but it cannot solve the equation for a powdered rod cracking in half and making a viewing port in the side of the block. Or the piston skirt cracking off and ending up in your oil pan. That is 100% pressure/power and rpm related.
he was showing me some dyno sheets, Petes performance in NH, It may be his dyno jet reads high I dont know, but if you have cams relieving pressure and I dont know what type of fuel they were using maybe e85, I dont see why not. Not sure how long it will last but its been done.

Hell theres guys spinning the factory cast crankshaft to 8K+ RPM dont know how long that will last but these guys are doing, which amazes me.

Follow me on Instagram! Username:whistles._
https://www.instagram.com/whistles._/

MineralGreyGT is offline  
post #5043 of 5062 Old March 19th, 2019, 07:09 PM
Hardcore Enthusiast
 
Snorky's Avatar
 
Join Date: May 2010
Location: NJ
Posts: 1,439
     
Garage
iTrader: 1 reviews
Quote:
Originally Posted by MineralGreyGT View Post
Quote:
Originally Posted by Snorky View Post
525 rwhp on a stock motor??! I find that a bit farfetched, not impossible.. just very improbable. A tune can help solve for piston melting issues.. but it cannot solve the equation for a powdered rod cracking in half and making a viewing port in the side of the block. Or the piston skirt cracking off and ending up in your oil pan. That is 100% pressure/power and rpm related.
he was showing me some dyno sheets, Petes performance in NH, It may be his dyno jet reads high I dont know, but if you have cams relieving pressure and I dont know what type of fuel they were using maybe e85, I dont see why not. Not sure how long it will last but its been done.

Hell theres guys spinning the factory cast crankshaft to 8K+ RPM dont know how long that will last but these guys are doing, which amazes me.
I am familiar with Pete, he tuned my car with the first turbo setup, great guy. As for the dyno jet, dynos are funny instruments. The cams will provide an increase of power with a reduction in restriction. The real issue is the powdered rods and hypuretic pistons, they are weak. The cast crank can handle the power. The rods and pistons have the greater tendency to come flying apart with enough influence. I have seen guys run high boost and set their rev limiters low and not have problems. Perhaps the increase in stroke pressure with the decrease in rotational velocity had something to do with that.
MineralGreyGT likes this.

Mmr900 4.75 striker. Stock heads, CMS stage 2 turbo cams, on3 67mm ball bwaring billet wheel turbo kit @12.7 psi
539 rwhp / 601 rwtq

Snorky is offline  
Sponsored Links
Advertisement
 
post #5044 of 5062 Old March 19th, 2019, 08:11 PM
Premium Member
 
y2k02's Avatar
 
Join Date: Mar 2009
Location: Columbus,Ohio
Posts: 3,358
                 
Garage
iTrader: 4 reviews
Dyno hp is different than street hp!! Also peak hp doesnt mean shit!
MineralGreyGT and takiller like this.

2002 GT Teksid TFS Heads Edelbrock Intake Twin PTE 6466 turbos TH400/UCC Converter Holley Dominator EFI
2018 Challenger Scat



Eddie Edwards on facebook
y2k02 is offline  
post #5045 of 5062 Old March 19th, 2019, 08:39 PM
Hardcore Enthusiast
 
Snorky's Avatar
 
Join Date: May 2010
Location: NJ
Posts: 1,439
     
Garage
iTrader: 1 reviews
Quote:
Originally Posted by y2k02 View Post
Dyno hp is different than street hp!! Also peak hp doesnt mean shit!
Thats right! Power under the curve! Son!
MineralGreyGT likes this.

Mmr900 4.75 striker. Stock heads, CMS stage 2 turbo cams, on3 67mm ball bwaring billet wheel turbo kit @12.7 psi
539 rwhp / 601 rwtq

Snorky is offline  
post #5046 of 5062 Old March 20th, 2019, 06:53 AM
Carving corners
 
MineralGreyGT's Avatar
 
Join Date: Jun 2007
Location: DartsMouth, MA
Posts: 3,327
           
iTrader: 18 reviews
Quote:
Originally Posted by Snorky View Post
I am familiar with Pete, he tuned my car with the first turbo setup, great guy. As for the dyno jet, dynos are funny instruments. The cams will provide an increase of power with a reduction in restriction. The real issue is the powdered rods and hypuretic pistons, they are weak. The cast crank can handle the power. The rods and pistons have the greater tendency to come flying apart with enough influence. I have seen guys run high boost and set their rev limiters low and not have problems. Perhaps the increase in stroke pressure with the decrease in rotational velocity had something to do with that.
I'm not sure what thier setup was, I am aware the rods are weak but I thought the hypeutectic pistons were strong just very brittle as in they can't handle detonation as in at all lol.

Also the cast crank I know can handle good amount power but it's the RPM people are spinning them too, it's just not as strong like a forged or billet crank would be and with hard launches with lots of power and revving to the moon your going to create stress cracks on the cast crank, you can't escape the fact that it is cast, I'm just wondering how long those cranks will last in the 8k+ realm.


Sent from my LG-H932 using Tapatalk

Follow me on Instagram! Username:whistles._
https://www.instagram.com/whistles._/

MineralGreyGT is offline  
post #5047 of 5062 Old April 7th, 2019, 03:38 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,573
                     
iTrader: 9 reviews
Not much going on at the moment I did a little remote tuning to 12PSI and calle dit a day until I get on the dyno with a live tuner.

I will say that 12PSI on my twins feels stronger then 17-18 PSI on my single

currently Im waiting on my Dyno session at the end of May in the meantime The car is running and ready i will be installing a new fuel tank and a new fuel pump.

I plan on capping my car off at around 800RWHP since i am getting the VIBE that the stock ECU might get me into trouble if i go any higher but if my tuner feels safe and likes what he sees ill be taking it wherever we feels safe. I

new things i like about my build is my oil filter location as its pretty sweet and I am glad I ran my PS fluid through my radiator" the old Transmission cooler side of my Radiator"


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #5048 of 5062 Old April 20th, 2019, 02:12 AM
Enthusiast
 
jstang909's Avatar
 
Join Date: Sep 2010
Location: fort bragg, nc
Posts: 769
   
iTrader: 2 reviews
Nice to see that this builds still alive. Haven't been on her much lately, but I did manage to finally get my car swapped to the vortech water cooled setup and tuned.

Carolina Crew #49

| Vortech V3 intercooled | 385 rwhp 379 rwtq|
jstang909 is offline  
post #5049 of 5062 Old April 21st, 2019, 06:21 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,573
                     
iTrader: 9 reviews
Quote:
Originally Posted by jstang909 View Post
Nice to see that this builds still alive. Haven't been on her much lately, but I did manage to finally get my car swapped to the vortech water cooled setup and tuned.
Thank You Im waiting right now on the Dyno and in between that upgrading my fuel Hat setup to some pretty big ass pumps.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #5050 of 5062 Old April 21st, 2019, 11:51 PM
Hardcore Enthusiast
 
Snorky's Avatar
 
Join Date: May 2010
Location: NJ
Posts: 1,439
     
Garage
iTrader: 1 reviews
Quote:
Originally Posted by SSG Pate View Post
Quote:
Originally Posted by jstang909 View Post
Nice to see that this builds still alive. Haven't been on her much lately, but I did manage to finally get my car swapped to the vortech water cooled setup and tuned.
Thank You Im waiting right now on the Dyno and in between that upgrading my fuel Hat setup to some pretty big ass pumps.
Walbro 465?

Mmr900 4.75 striker. Stock heads, CMS stage 2 turbo cams, on3 67mm ball bwaring billet wheel turbo kit @12.7 psi
539 rwhp / 601 rwtq

Snorky is offline  
post #5051 of 5062 Old April 21st, 2019, 11:54 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,573
                     
iTrader: 9 reviews
Quote:
Originally Posted by Snorky View Post
Walbro 465?
TI Automotive F90000285 Fuel Pumps AKA Hellcat pumps..putting them into a FORE HAT.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #5052 of 5062 Old August 1st, 2019, 11:18 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,573
                     
iTrader: 9 reviews
Just an update on my ongoing build.. I finally decided to build my own Twin Turbo kit ive got the majority of it done and now im just finishing up the downpipes and exhaust. Ive got some clean up to do but things will wrap up in less then 2 weeks.. I have a Dyno APPT at the end of the month.





Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #5053 of 5062 Old August 2nd, 2019, 11:53 AM
Newbie
 
lowboost2v's Avatar
 
Join Date: Dec 2016
Posts: 13
 
iTrader: 0 reviews
Are you running your stock ECU that came in the car?

Formerly known as Scott2001GT
lowboost2v is offline  
post #5054 of 5062 Old August 2nd, 2019, 12:37 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,573
                     
iTrader: 9 reviews
Quote:
Originally Posted by lowboost2v View Post
Are you running your stock ECU that came in the car?
Hey Scottt been wondering how your doing..


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #5055 of 5062 Old August 2nd, 2019, 01:05 PM
Newbie
 
lowboost2v's Avatar
 
Join Date: Dec 2016
Posts: 13
 
iTrader: 0 reviews
Quote:
Originally Posted by SSG Pate View Post
Hey Scottt been wondering how your doing..
Oh I'm doing ok sir and yourself?

Nice build you have going here. Should be a fun ride once completed.

Formerly known as Scott2001GT
lowboost2v is offline  
post #5056 of 5062 Old August 2nd, 2019, 10:57 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,573
                     
iTrader: 9 reviews
Quote:
Originally Posted by lowboost2v View Post
Oh I'm doing ok sir and yourself?

Nice build you have going here. Should be a fun ride once completed.
Thanks Its going pretty smooth after today t looks like ill be done in less then a week.

Yes I am on a stock ECU


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #5057 of 5062 Old August 4th, 2019, 12:20 AM
Newbie
 
lowboost2v's Avatar
 
Join Date: Dec 2016
Posts: 13
 
iTrader: 0 reviews
Anxious for some pull videos.

Maybe took into a Mach 1 or 03/04 Cobra ECU. They have a faster processor. Might help you reach just a little bit further.

Formerly known as Scott2001GT
lowboost2v is offline  
post #5058 of 5062 Old August 4th, 2019, 11:24 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,573
                     
iTrader: 9 reviews
Quote:
Originally Posted by lowboost2v View Post
Anxious for some pull videos.

Maybe took into a Mach 1 or 03/04 Cobra ECU. They have a faster processor. Might help you reach just a little bit further.
I almost went with a holley but my tuner wasnt concerned about the ECU. I got a APPT at the end of the month.


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
post #5059 of 5062 Old August 5th, 2019, 06:34 PM
Newbie
 
lowboost2v's Avatar
 
Join Date: Dec 2016
Posts: 13
 
iTrader: 0 reviews
Quote:
Originally Posted by SSG Pate View Post
I almost went with a holley but my tuner wasnt concerned about the ECU. I got a APPT at the end of the month.
Hopefully all goes well. I was looking into Holley too but my parts guy highly recommended for me to take a look into the MS3 Pro. I think I'll go that route after looking into it and hearing some so-so things about the Holley stuff.

Formerly known as Scott2001GT
lowboost2v is offline  
post #5060 of 5062 Old November 21st, 2019, 10:51 PM Thread Starter
Moderator
 
SSG Pate's Avatar
 
Join Date: Sep 2010
Location: Tennessee
Posts: 13,573
                     
iTrader: 9 reviews
For thos of you who have followed this build over the years After about 300+ years i am about done. I drove around all summer on the twin kit but I went back to a single turbo LOL.. I will post up some pics of the final product here in about a week after i get my turbo compressor back from boost labs..

I gotta be honest Im kinda lost since the car is about 100 percent and i seem to be happy with everything.Not sure what i will do next maybe MOD the 19 Coyote


Convertible Crew Founder
Proud Iraq and Afghanistan War veteran

700 RWHP Club Member #1

Vortech T Trim @18 PSI
604 RWHP 516 FT LB
[email protected]@ 523RWHP

Precision Turbo 7675 CEA @ 20 PSI
738 RWHP 691 FT LB
10.9 @ 131 MPH
SSG Pate is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Forums at Modded Mustangs forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



  LinkBacks (?)
LinkBack to this Thread: https://www.moddedmustangs.com/forums/96-04/336618-turbo-build-has-begun.html
Posted By For Type Date
My "re" build thread - Trick flow/turbo build - Page 3 - Ford Mustang Forums : Corral.net Mustang Forum This thread Refback July 9th, 2016 08:34 PM
Thread The Turbo build has begun | Forums at Modded Mustangs | BoardReader This thread Refback December 1st, 2015 01:31 AM
kurgan motorsports | BoardReader This thread Refback February 3rd, 2015 08:14 PM
The Turbo build has begun - Page 66 This thread Refback December 3rd, 2014 12:02 AM
UPR cracked | BoardReader This thread Refback March 27th, 2014 06:50 PM
UPR customer service | BoardReader This thread Refback March 27th, 2014 06:01 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome