shes up in the air, and ready to be undressed. Got my unvented propane heater installed and Im ready for a nice cozy winter project.
Im doing this in a couple different phases
Phase one Ill be redoing the motor to get it ready to take the boost ill be tossing at it. the plan is as follows
Replace Forged I beam rods with Forged H beam Rods/ ARP hardware
Keep stock ported heads
new main bearing kit
Rebalance rotating assembly
Install whatever Turbo cams I buy
put the motor back together
Complete Transmission overhaul with new converter to match cams.
remove 373 gears install 327 gears.
Button her up and reinstall the motor.
This should complete all my motor trans work then off to the next phase
CG Fabrication forward facing twin turbo headers WITH AIR CONDITIONING retention!!
Fab up my own exhaust from the downpipe back
Precision Ball bearing Turbos " size to be determined
Tread stone TRTT series intercooler
46MM waste gates
50MM BOV'S
Boost controller
Ill take pictures as I go as far as fabbing ETC.
2slow is coming down Friday to help me get the motor and trans out so the party can begin.
Got the intake off, motor mounts, ps pump all pulleys/ac compressor off tonight!
QUICK REFERENCE
Engine removal page 6
Battery relocation page 7
410 gear removal 327 gear installation page 9
Removing piston Rods ETC page 10
ALT paining page 11
Stock K member drop page 12
Custom catch can page 12
Rear Suspension page 13
KMS Fuel hat page 13
T stat modification page 14
Mishimoto radiator install page 14
Glens performance Fuel tank install/ modification page15
UPR Chrome molly K member/ A arms/ Brake upgrades page 16
Short block page 17
Oil pan modification for Turbo drain
Line lock page 20
Oil filter relocation kit page 20
5.0 motor running again page 21
Windsor heads arrived Page 22
MMR Billet oil pump 23
Head Stud install page 23
Timing cover polished page 24
Head and timing install page 24
Motor Dropped back in page 24
New wheels page 28
Intake and 6061 plenum install page 29
First startup no headers page 31
Radiator relocation page 33
TIAL BOV arrived Page 36
PS reservoir relocation page 37
Mishimoto R series intercooler page 43
Custom over flow tank page 44
Cold side piping install/ plus welded bungs page 44
coolant overflow tank installed Page 45
Flex radiator hose page 45
CD delete gauge install page 45-46
AEM gauge and sensor install page 48
Custom Vacuum block install page 49
Hot side exhaust started page 50
Precision 60MM waste gate arrival page 52
Welding up some turbo exhaust page 53
Procharger F1C VS Precision 7675 page 54
LOKAR dipstick Page 55
Precision 7675 Polishing page 55
LOKAR mounting page 56
CG Fabrication hot side page 57
Turbo installed page 57
Couple turbo Videos page 60
Turbo installed page
Im doing this in a couple different phases
Phase one Ill be redoing the motor to get it ready to take the boost ill be tossing at it. the plan is as follows
Replace Forged I beam rods with Forged H beam Rods/ ARP hardware
Keep stock ported heads
new main bearing kit
Rebalance rotating assembly
Install whatever Turbo cams I buy
put the motor back together
Complete Transmission overhaul with new converter to match cams.
remove 373 gears install 327 gears.
Button her up and reinstall the motor.
This should complete all my motor trans work then off to the next phase
CG Fabrication forward facing twin turbo headers WITH AIR CONDITIONING retention!!
Fab up my own exhaust from the downpipe back
Precision Ball bearing Turbos " size to be determined
Tread stone TRTT series intercooler
46MM waste gates
50MM BOV'S
Boost controller
Ill take pictures as I go as far as fabbing ETC.
2slow is coming down Friday to help me get the motor and trans out so the party can begin.
Got the intake off, motor mounts, ps pump all pulleys/ac compressor off tonight!
QUICK REFERENCE
Engine removal page 6
Battery relocation page 7
410 gear removal 327 gear installation page 9
Removing piston Rods ETC page 10
ALT paining page 11
Stock K member drop page 12
Custom catch can page 12
Rear Suspension page 13
KMS Fuel hat page 13
T stat modification page 14
Mishimoto radiator install page 14
Glens performance Fuel tank install/ modification page15
UPR Chrome molly K member/ A arms/ Brake upgrades page 16
Short block page 17
Oil pan modification for Turbo drain
Line lock page 20
Oil filter relocation kit page 20
5.0 motor running again page 21
Windsor heads arrived Page 22
MMR Billet oil pump 23
Head Stud install page 23
Timing cover polished page 24
Head and timing install page 24
Motor Dropped back in page 24
New wheels page 28
Intake and 6061 plenum install page 29
First startup no headers page 31
Radiator relocation page 33
TIAL BOV arrived Page 36
PS reservoir relocation page 37
Mishimoto R series intercooler page 43
Custom over flow tank page 44
Cold side piping install/ plus welded bungs page 44
coolant overflow tank installed Page 45
Flex radiator hose page 45
CD delete gauge install page 45-46
AEM gauge and sensor install page 48
Custom Vacuum block install page 49
Hot side exhaust started page 50
Precision 60MM waste gate arrival page 52
Welding up some turbo exhaust page 53
Procharger F1C VS Precision 7675 page 54
LOKAR dipstick Page 55
Precision 7675 Polishing page 55
LOKAR mounting page 56
CG Fabrication hot side page 57
Turbo installed page 57
Couple turbo Videos page 60
Turbo installed page